Relative expression of insulin like growth factor I (IGFI) and follicle stimulating hormone receptor (FSHR) in follicles and ovarian tissue from Bos primigenius indicus (Nelore)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Dynamic Scaling and Growth Kinetics of 3-Glycidoxypropyltrimethoxysilane-Derived Organic/Silica Hybrids

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Surface equilibrium angle for anisotropic grain growth in SnO2 systems

Usually, the kinetic models used in the study of sintered ceramic are performed by means of indirect physical tests, such as, results obtained from data of linear shrinkage and mass loss. This fact is justified by the difficulty in the determinations of intrinsic parameters of ceramic materials along every sintering process. In this way, the technique of atomic force microscopy (AFM) was used in order to determine the importance and the evolution of the dihedral angle in the sintering of 0.5 mol% MnO2-doped tin dioxide obtained by the polymeric precursor method.

Correlação linear e espacial entre o rendimento de grãos do feijoeiro e a resistência mecânica à penetração em um Latossolo Vermelho distrófico

A resistência mecânica à penetração apresentada pelo solo exerce grande influência sobre o desenvolvimento vegetal, uma vez que o crescimento das raízes, assim como o rendimento das culturas, varia de forma inversamente proporcional ao seu valor. No ano agrícola de 2001/2002, na Fazenda Experimental de Ensino e Pesquisa da Faculdade de Engenharia/UNESP - Campus de Ilha Solteira, foram analisados o rendimento de grãos do feijoeiro (PG) e a resistência mecânica à penetração (R), de um Latossolo Vermelho distrófico. O objetivo foi apurar diretrizes relacionadas com o aumento da produtividade agrícola em questão, estudando a correlação linear e a espacial entre a PG e a R. Foi instalada uma rede geoestatística para a coleta dos dados do solo e da planta, estabelecida com espaçamentos de 5 x 5 m e 2,5 x 2,5 m, que continham 120 pontos amostrais distribuídos numa área de 1.875 m². A correlação linear entre a PG e a R foi praticamente nula, uma vez que, dependendo das profundidades estudadas do solo, apresentou coeficientes de correlação (r) menores do que 0,20. A análise geoestatística apresentou boa estrutura de dependência espacial, tanto para a PG quanto para a R, quando analisadas isoladamente. Entretanto, a análise espacial conjunta de tais atributos apresentou-se inconsistente. Assim, com o aumento da resistência mecânica à penetração, em determinada região do solo ocorreu ora aumento, ora diminuição do rendimento de grãos do feijoeiro.

Spatial and linear correlations between soil and corn

O conjunto de tecnologias aplicadas ao sistema de produção agrícola tem como características principais a verticalização da produtividade, diminuição de custos, melhoria nas características físicas, químicas e biológicas do solo para proporcionarem o crescimento sustentável do meio de produção. Desta forma, o trabalho teve como objetivo determinar a variabilidade e as correlações lineares e especiais entre os atributos da planta e do solo, visando selecionar um indicador da qualidade física do solo de boa representatividade para produção de forragem. No ano agrícola de 2006, na Fazenda Bonança, município de Pereira Barreto (SP), foram analisados a produtividade de forragem do milho outonal (FDM) em sistema plantio direto irrigado e os atributos físicos do solo, num Latossolo Vermelho distrófico. O objetivo foi estudar a variabilidade e as correlações lineares e espaciais entre os atributos da planta e os do solo, visando selecionar um indicador da qualidade física do solo de boa representatividade para a produtividade da forragem. Foi instalada a malha geoestatística, para coleta de dados do solo e planta, contendo 125 pontos amostrais, numa área de 2.500 m². Os atributos estudados, além de não terem variado aleatoriamente, apresentaram variabilidade dos dados entre baixa e muito alta e seguiram padrões espaciais bem definidos, com alcances entre 7,8 e 38,0 m. Por outro lado, a correlação linear entre os atributos da planta com o do solo foi baixa e extremamente significativa. Os pares Massa Seca de forragem versus Microporosidade e Diâmetro do colmo versus Densidade do Solo foram melhor correlacionados na camada de 0-0.10m, enquanto os outros pares - Massa Seca de Forragem versus Macroporosidade - e Porosidade Total - apresentaram correlação inversa para a mesma camada. Entretanto, do ponto de vista espacial, houve uma alta correlação inversa entre Massa Seca de Forragem com Microporosidade, de modo que a microporosidade na camada de 0-0.10m pode ser considerada um bom indicador de qualidade física do solo, tendo em vista a produção de forragem de milho.

Determination of a point sufficiently close to the asymptote in nonlinear growth functions

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Postweaning growth of the non-carcass components of Texel crossbred lambs

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Mineral requirements for growth of wool and hair lambs

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

INFLUENCE OF DIETARY-PROTEIN INTAKE AND RECOMBINANT HUMAN SOMATOTROPIN ADMINISTRATION ON GROWTH AND BODY-COMPOSITION OF JUVENILE TAMBACU (A PIARACTUS-MESOPOTAMICUS X COLOSSOMA-MACROPOMUM CROSS)

This experiment was undertaken to study the interaction between level of dietary protein and recombinant human somatotropin (rhGH) administration on performance and body composition of juvenile tambacu (a crossbred Brazilian fish). A total of 72 juvenile tambacu, initially weighing and measuring (mean +/- s.e.m.) 23 +/- 2 g and 9 +/- 0.5 cm, respectively, were randomly divided into 18 groups of 4 fish each. Water temperature was 28 degrees C. Triplicate groups received one of two levels of dietary protein (15 and 30% as fed basis) and one of 3 doses of rhGH (0, 2 and 4 mu g/g) via intraperitoneal injection twice a week for 6 weeks, using a randomized complete block design. Somatotropin was noted to stimulate linear and body weight gain. The higher protein level supported increased growth in weight and length, but there was no interaction between protein level and rhGH dose for either parameter. Protein efficiency ratio and percentage protein deposited showed higher values on diets containing 15% protein. Somatotropin treatment did not significantly affect body composition, but there was a trend towards improved protein retention and reduced carcass lipid. In conclusion, the results of this experiment suggest that rhGH is able to stimulate linear gain in tambacu.

A sensor for monitoring the volume of nutrient in a solid substrate-based growth media by using electrochemical admittance spectroscopy

A sensor was fashioned to monitor the volume of nutrient in a solid substrate-based growth media by using electrochemical admittance spectroscopy. Several experimental parameters were investigated (i.e. The use of two- or three-electrode cells, the superficial area of the electrode, the amount of nutrient solution added to the growth media, and the influence of varying the dc and ac potential) to assess how these variables affect the admittance of the system. A linear correlation was observed between the maximum of the imaginary admittance and the volume of nutrient present. The response factor was 2.8 x 10(-5) S cm(-2) ml(-1) and the limit of detection (LOD) was 0.54 ml. The humidity of the growth media does not change the response of the nutrient toward the monitoring measurements. These results demonstrate that the volume of nutrient in this solid substrate-based growth media can be assessed using a ceramic sensor to measure the imaginary admittance. (C) 2002 Elsevier B.V. B.V. All rights reserved.

Genetic and phenotypic trends for growth traits of buffaloes in Brazil

The objectives this paper were to estimate genetic parameters and genetic and phenotypic trends of birth weight (BWT) and weights adjusted to 205 (WT205), 365 (WT365) and 550 (P550) days of age of beef buffaloes born from 1985 to 2003 in Brazil. For BWT and WT205 the model included direct and maternal genetic and maternal environment as random effects and contemporary and genetic groups as fixed effects. For WT365 and WT550 the same model was used except without direct maternal and maternal environmental effects. The genetic and phenotypic trends were estimated by regression of means of dependent variables on birth year of animals Regressions were obtained by using two methodologies: 1) linear regression; and 2) non-parametric splined regression. The direct heritability estimates were 0.09, 0.45, 0.46 and 0.58 for BWT, WT205, WT365 and WT550, respectively. The direct genetic trends from linear regression were 0.01, 0.23, 0.58 and 1.40 kg per year for PN, WT205, VVT365 and WT550, respectively (P<0.001 for all). Phenotypic trends were strongly positive while genetic trends were consistently positive but small. Genetic parameters indicate potential for increased rate of genetic change with full implementation of genetic improvement programs.

Crystal growth of Ce-doped and undoped LiCaAlF6 by the Czochralski technique under CF4 atmosphere

Ce-doped and undoped LiCaAlF6 (LiCAF) single crystals 50 mm in diameter were grown by the Czochralski technique. The formation of inclusions and cracks accompanying the crystal growth was investigated. The dependence of lattice parameters on the temperature was measured for LiCAF and LiSrAlF6 single crystals. Linear thermal expansion coefficients for both these crystals were evaluated. Higher transmission properties for LiCAF single crystals were achieved in the UV and VUV wavelength regions. (C) 2001 Elsevier B.V. B.V. All rights reserved.

Sintering and crystallite growth of nanocrystalline copper doped tin oxide

The effect of Cu2+ contents and of firing temperature on sintering and crystallite growth of nanocrystalline SnO2 xerogels was analyzed by thermoanalysis (mass loss (TG), linear shrinkage, and differential thermal analysis (DTA)), X-ray powder diffraction (XRPD), and EXAFS (extended X-ray absorption fine structures) measurements. Samples were prepared by two methods: (a) coprecipitation of a colloidal suspension from aqueous solution containing both Sn(IV) and Cu(II) ions and (b) grafting copper(II) species on the surface of tin pride gel. The thermoanalysis has shown that the shrinkage associated with the mass loss decreases by increasing the amount of copper. The EXAFS measurements carried out at the Cu K edge have evidenced the presence of copper in substitutional solid solution for the dried xerogel prepared with 0.7 mol % of copper, while for higher concentration of doping, copper has been observed also at the external surface of crystallites. The solid solution is metastable and copper migrates toward the surface during firing. The XRPD and DTA results have shown a recrystallization process near 320 degrees C, which leads to crystallite growth. The presence of copper segregated near the crystallite surface controls its growth.

In Situ and Simultaneous UV-vis/SAXS and UV-vis/XAFS Time-Resolved Monitoring of ZnO Quantum Dots Formation and Growth

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Growth Curves and Genetic Parameters in Colombian Buffaloes (Bubalus bubalis Artiodactyla, Bovidae)

Non-linear mathematical functions proposed by Brody, Gompertz, Richards, Bertalanffy and Verhulst were compared in several buffalo production systems in Colombia. Herds were located in three provinces: Antioquia, Caldas, and Cordoba. Growth was better described by the curves proposed by Brody and Gompertz. Using the datasets from herds from Caldas, heritabilities for traits such as weaning weight (WW), weight and maturity at one year of age (WY and MY, respectively), age at 50% and 75% of maturity (A50% and A75%, respectively), adult weight (beta(0)), and other characteristics, were also estimated. Direct and maternal heritabilities for WW were 0.19 and 0.12, respectively. Direct heritabilities for WY, MY, A50%, A75% and beta(0) were 0.39, 0.15, 0.09, 0.20 and 0.09, respectively. The genetic correlation for beta(0) and WY was -0.47, indicating that selection for heavy weight at one year of age will lead to lower weight at adult age. These data suggest that selection based on maturity traits can generate changes in characteristics of economic importance in beef-type buffalo farms.