Influence of Different Surface Treatments on Bond Strength of Resin Composite Using the Intrinsic Characterization Technique

Objective: This study evaluated the influence of different surface treatments on the resin bond strength/light-cured characterizing materials (LCCMs), using the intrinsic characterization technique. The intrinsic technique is characterized by the use of LCCMs between the increments of resin composite (resin/thin film of LCCM/external layer of resin covering the LCCM).Materials and Methods: Using a silicone matrix, 240 blocks of composite (Z350/3M ESPE) were fabricated. The surfaces received different surface treatments, totaling four groups (n=60): Group C (control group), no surface treatment was used; Group PA, 37% phosphoric acid for one minute and washing the surface for two minutes; Group RD, roughening with diamond tip; and Group AO, aluminum oxide. Each group was divided into four subgroups (n=15), according to the LCCMs used: Subgroup WT, White Tetric Color pigment (Ivoclar/Vivadent) LCCM; Subgroup BT, Black Tetric Color pigment (Ivoclar/Vivadent) LCCM; Subgroup WK, White Kolor Plus pigment (Kerr) LCCM; Subgroup BK, Brown Kolor Plus pigment (Kerr) LCCM. All materials were used according to the manufacturer's instructions. After this, block composites were fabricated over the LCCMs. Specimens were sectioned and submitted to microtensile testing to evaluate the bond strength at the interface. Data were submitted to two-way analysis of variance (ANOVA) (surface treatment and LCCMs) and Tukey tests.Results: ANOVA presented a value of p<0.05. The mean values (+/- SD) for the factor surface treatment were as follows: Group C, 30.05 MPa (+/- 5.88)a; Group PA, 23.46 MPa (+/- 5.45)b; Group RD, 21.39 MPa (+/- 6.36)b; Group AO, 15.05 MPa (+/- 4.57)c. Groups followed by the same letters do not present significant statistical differences. The control group presented significantly higher bond strength values than the other groups. The group that received surface treatment with aluminum oxide presented significantly lower bond strength values than the other groups.Conclusion: Surface treatments of composite with phosphoric acid, diamond tip, and aluminum oxide significantly diminished the bond strength between composite and the LCCMs.

Obtenção de um ataque químico padrão, zona de annealing parcial e temperatura de fechamento para o epídoto através do método dos traços de fissão

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Direitos de propriedade e usos econômicos da terra:um estudo de caso de assentamentos de reforma agrária no sul do Pará

This article discusses the Brazilian land problem related to property rights of rural land. After emphasizing the importance of land policies in order to define and distribute rural land properties rights, we show how in Brazil the institutions of rural land registering and cadastering as separated processes debilitates the property rights, making them vulnerable to the effective occupying actions. In order to illustrate it, in this article we analyze Data based in a Case Study of conflict and property rights distributions in an important farming and mining region of southern Para state, in Brazil.

Resistência de união e microinfiltração em restaurações de resina

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Abordaje conservador y mínimamente invasivo de la hipomineralización molar-incisivo (HMI) - Relato de casos clínicos

Molar-Incisor Hypomineralization (MIH) is a qualitative developmental enamel defect that affects one to four permanent first molars, with or without involvement of permanent incisors. Enamel defects may produce many symptoms that have physical, social and psychological effects and influence day-to-day living or quality of life. The available treatment modalities for teeth with MIH are extensive, ranging from prevention, restoration, to extraction. Factors such as age, patient expectations, severity of the lesion and materials should be considered in the treatment of the patient with MIH. Restoration with composite resin is an alternative choice for posterior and anterior MIH defective teeth and its use has been show acceptable results. This article describes two clinical cases involving pediatric patients with MIH whose procedure of cavity preparation was based on the use of CVD ultrasound diamond tips and restored using composite resin obtaining favorable esthetics results after a 1 year follow-up.

Preparos dentais para coroas totais anteriores cerâmicas

The aim of this study is to describe, illustrate and discuss a simple, effective and rational method for preparing anterior all-ceramic restorations. This procedure uses a reduced number of diamond burs and a few clinical steps. The biological, mechanical, functional and aesthetic principles are obtained in a reasonable manner, regarding the requirements’ supported by the contemporary aesthetic dentistry. At the end of reading, it is expected that the professionals understand the design of the axial and cervical dental walls. Finally, the dental preparations will be made in a rapid and efficient manner. Despite the citation of specific diamond burs, it is expected that the reader use them as a reference. The understanding of their geometric configuration and volume are more important than their manufacturer’s reference number. Other manufacturers have diamond burs with the same geometric configuration of those recommended in this technique. Thus, the clinical professional must select the diamond points according to their manufacturer of choice.

Methods for removal of resin remaining after debonding of orthodontic brackets: a literature review

The removal of resin debris and/or resin cement from the enamel surface without causing iatrogenic is the main objective when removing the orthodontic brackets. Some factors such as the time required for removal, damage to the tooth structure, are essential factors for the clinician at the time of removal. Various techniques are used for the removal of orthodontic brackets after the treatment; it is known that the use of clinical procedures such as the use of diamond burs and some pliers removers can damage the structure of the enamel, often depending on the bond strength that should be taken into consideration at the time of removal. This literature review aims to gather the most relevant studies that can clarify the clinical technique, which may be more suitable for removal of the brackets.

Produção de mudas de espécies florestais de restinga, com base em estudos florísticos e fitossociológicos, visando a recuperação de áreas degradadas, em Ilha Comprida - SP

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Do sonho à luta de sobrevivência na Amazônia: a caminhada das famílias camponesas do Projeto RECA

Pós-graduação em Ciências Sociais - FCLAR

Reciclagem de cavacos para a formação de carbonetos de titânio no metal de solda produzido por soldagem GTAW em aço-carbono

Pós-graduação em Engenharia Mecânica - FEIS

Neural tool condition estimation in the grinding of advanced ceramics

Ceramic parts are increasingly replacing metal parts due to their excellent physical, chemical and mechanical properties, however they also make them difficult to manufacture by traditional machining methods. The developments carried out in this work are used to estimate tool wear during the grinding of advanced ceramics. The learning process was fed with data collected from a surface grinding machine with tangential diamond wheel and alumina ceramic test specimens, in three cutting configurations: with depths of cut of 120 mu m, 70 mu m and 20 mu m. The grinding wheel speed was 35m/s and the table speed 2.3m/s. Four neural models were evaluated, namely: Multilayer Perceptron, Radial Basis Function, Generalized Regression Neural Networks and the Adaptive Neuro-Fuzzy Inference System. The models'performance evaluation routines were executed automatically, testing all the possible combinations of inputs, number of neurons, number of layers, and spreading. The computational results reveal that the neural models were highly successful in estimating tool wear, since the errors were lower than 4%.

Recuperação de área de preservação permanente através da nucleação como subsídio à adequação legal da atividade de extração de argila em pequena propriedade

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Alfabetização científica em nível médio e a preparação dos cidadãos para o processo de tomada de decisões

The concept of scientific literacy nowadays is permeated by principles eventually inconsistent. Development of cognitive skills, preparation for continuing studies in higher education, preparation for working life and the strengthening of citizenship are some of the competing goals of science education. In respect of Science, Technology, Society and Environment (STSE) Education, the politics of science should be properly taken into account by science education. This paper examines the concept of scientific literacy in the context of STSE Education and points to why and how physics education in high school curriculum should address topics of energy consumption and production in order to provide the background necessary to assess public policies of science, technology and innovation, in particular the Decennial Plan for Expansion of Energy 2020, subjected to public consultation by the Brazilian Ministry of Mines and Energy in 2011.

A aplicação da abordagem do Tecnógeno na identificação e classificação dos terrenos e depósitos tecnogênicos no ambiente urbano de Guarapuava-PR

Pós-graduação em Geografia - FCT

Identificação de áreas degradadas por extração de argila no município de Ourinhos (SP): recuperação do passivo ambiental e proteção dos recursos hídricos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)