Caracterização fitoquímica e avaliação dos potenciais antimicrobiano e carrapaticida de extrativos vegetais de Tagetes patula L. (Asteraceae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ácido indol-butírico, 2,6-di-hidroxiacetofenona e gene ARRO-1 no enraizamento de estacas de pessegueiro

Pós-graduação em Agronomia (Horticultura) - FCA

Avaliação da segurança e da atividade imunomoduladora dos extratos de Uncaria tomenosa e Uncaria guianensis sobre a patogenia dos Diabetes Melito autoimune induzido pela estreptozotocina

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Propriedades elétricas e modelagem da barreira de potencial do sistema varistor à base de SnO2-TiO2

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Cerâmicas nanoestruturadas à base do àxido niobato de estrâncio e potássio com inserção de íons cobre e processo otimizado de fabricação de cerâmicas nanoestruturadas à base do àxido niobato de estrâncio e potássio com inserção de íons cobre via sinterização aditivada com àxido de cobre

Cerâmicas nanoestruturadas à base do óxido niobato de estrôncio e potássio com inserção de lons cobre e Processo otimizado de fabricação de cerâmicas nanoestruturadas à base do óxido niobato de estrôncio e potássio com inserção de lons cobre via sinterização aditivada com óxido de cobre", a presente invenção descreve uma classe de materiais compósitos cerâmicos ferroelétricos nanoestruturados à base do óxido niobato de estrôncio e potássio obtidos via sinterização aditivada com óxido de cobre II (CuO). Os materiais compósitos cerâmicos KSN - CuO são sinterizados entre 960 <198>C a 1250 <198>C, a composição do aditivo de sinterização (CuO) está entre 0,5 a 2,0 % (percentagem em massa).

Cerâmicas nanoestruturadas à base do óxido niobato de estrôncio e potássio com inserção de íons cobre e de íons boro e processo otimizado de fabricação de cerâmicas nanoestruturas à base do óxido niobato de estrôncio e potássio com inserção de íons cobre e de íons boro via sinterização aditivada com óxido de cobre e óxido de boro

A invenção descreve uma classe de materiais compósitos cerâmicos ferroelétricos nanoestruturados à base do óxido niobato de estróncio e potássio obtidos via sinterização aditivada com óxidos de cobre (CuO/Cu~ 2~O), preferencialmente o óxido de cobre II, e óxido de boro (B~ 2~O~ 3~). Os materiais compósitos cerâmicos KSN - CuO:B~ 2~O~ 3~ são sinterizados entre 960<198>C a 1250<198>C, diversas razões em massa CuO:B~ 2~O~ 3~ (1:1, 1:2, e 1:4) são utilizadas como aditivos de sinterização.

Fósforo na alimentação de pacus criados em tanques-rede

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Caracterização de Retrotransposons com LTR no gênero Eucalyptus

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Structural and optical properties of Cu2O crystalline electrodeposited films

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Convergence towards asymptotic state in 1-D mappings: a scaling investigation

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Thermoregulatory consequences of salt loading in the lizard Pogona vitticeps

Previous research has demonstrated that dehydration increases the threshold temperature for panting and decreases the thermal preference of lizards. Conversely, it is unknown whether thermoregulatory responses such as shuttling and gaping are similarly influenced. Shuttling, as an active behavioural response, is considered one of the most effective thermoregulatory behaviours, whereas gaping has been proposed to be involved in preventing brain over-heating in lizards. In this study we examined the effect of salt loading, a proxy for increased plasma osmolality, on shuttling and gaping in Pogona vitticeps. Then, we determined the upper and lower escape ambient temperatures (UETa and LETa), the percentage of time spent gaping, the metabolic rate ((V) over dot(O2)), the evaporative water loss (EWL) during gaping and non-gaping intervals and the evaporative effectiveness (EWL/(V) over dot(O2)) of gaping. All experiments were performed under isotonic (154 mmol l(-1)) and hypertonic saline injections (625, 1250 or 2500 mmol l(-1)). Only the highest concentration of hypertonic saline altered the UETa and LETa, but this effect appeared to be the result of diminishing the animal's propensity to move, instead of any direct reduction in thermoregulatory set-points. Nevertheless, the percentage of time spent gaping was proportionally reduced according to the saline concentration; (V) over dot(O2) was also decreased after salt loading. Thermographic images revealed lower head than body surface temperatures during gaping; however this difference was inhibited after salt loading. Our data suggest that EWL/(V) over dot(O2) is raised during gaping, possibly contributing to an increase in heat transfer away from the lizard, and playing a role in head or brain cooling.

Analysis of oxy-fuel combustion as an alternative to combustion with air in metal reheating furnaces

Using oxygen instead of air in a burning process is at present being widely discussed as an option to reduce CO2 emissions. One of the possibilities is to maintain the combustion reaction at the same energy release level as burning with air, which reduces fuel consumption and the emission rates of CO2. A thermal simulation was made for metal reheating furnaces, which operate at a temperature in the range of 1150-1250 degrees C, using natural gas with a 5% excess of oxygen, maintaining fixed values for pressure and combustion temperature. The theoretical results show that it is possible to reduce the consumption of fuel, and this reduction depends on the amount of heat that can be recovered during the air pre-heating process. The analysis was further conducted by considering the 2012 costs of natural gas and oxygen in Brazil. The use of oxygen showed to be economically viable for large furnaces that operate with conventional heat recovering systems (those that provide pre-heated air at temperatures near 400 degrees C). (C) 2014 Elsevier Ltd. All rights reserved.

Agelotoxin: a phospholipase A(2) from the venom of the neotropical social wasp cassununga (Agelaia pallipes pallipes) (Hymenoptera-Vespidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Development of CAN-based distributed control system for variable rate technology in agricultural machinery

The number of electronic devices connected to agricultural machinery is increasing to support new agricultural practices tasks related to the Precision Agriculture such as spatial variability mapping and Variable Rate Technology (VRT). The Distributed Control System (DCS) is a suitable solution for decentralization of the data acquisition system and the Controller Area Network (CAN) is the major trend among the embedded communications protocols for agricultural machinery and vehicles. The application of soil correctives is a typical problem in Brazil. The efficiency of this correction process is highly dependent of the inputs way at soil and the occurrence of errors affects directly the agricultural yield. To handle this problem, this paper presents the development of a CAN-based distributed control system for a VRT system of soil corrective in agricultural machinery. The VRT system is composed by a tractor-implement that applies a desired rate of inputs according to the georeferenced prescription map of the farm field to support PA (Precision Agriculture). The performance evaluation of the CAN-based VRT system was done by experimental tests and analyzing the CAN messages transmitted in the operation of the entire system. The results of the control error according to the necessity of agricultural application allow conclude that the developed VRT system is suitable for the agricultural productions reaching an acceptable response time and application error. The CAN-Based DCS solution applied in the VRT system reduced the complexity of the control system, easing the installation and maintenance. The use of VRT system allowed applying only the required inputs, increasing the efficiency operation and minimizing the environmental impact.

Avaliação farmacognóstica qualitativa das folhas do vegetal Bambusa textilis

Introduction: Bamboos belong to the family Graminae, Bambusoidae subfamily, represented by about 1,250 species worldwide. Originally employed in construction and power, are currently the subject of investigations related to its therapeutic properties in neoplasms. The main species used for therapeutic purposes based on popular knowledge are: Phyllostachys nigra; Bambusa breiflora; tuldoides Bambusa textilis and Bambusa. The literature on the therapeutic action of bamboo species is scarce, but recent studies report a promising effect in the treatment of cancer and other chronic diseases. Objective: This study aimed to evaluate qualitatively the phytochemical composition of plant extract obtained from the leaves of the bamboo species Bambusa textilis, comparing this composition from vegetable leaves with 18 and 24 months of age. Methodology: After collecting plant leaves with 18 or 24 months, they were identified and submitted to drying and milling. For qualitative analysis of its components were employed methods of macroscopic evaluation (mucilage), method of benzoin (resin), reaction Shinoda (flavonoids), reaction with gelatin solution (tannins), boiling and foaming (saponins) and jobs of reactive Wagner, Bertrand, Dragendorff, Mayer, picric acid and tannic acid (alkaloids) (Biavatti; MILK, 2007). Results: in the youngest leaves were found positive for alkaloids, flavonoids, resins and saponins. In the leaves of the plant with 24 months were found only alkaloids flavonoids and resins. Conclusion: the composition of vegetable substances were found associated with a significant therapeutic potential difference and the phytochemical composition in comparison with plant leaves 18 or 24 months. Additional studies are needed to quantify these components, as well as the clarification of its action in the fight against cancer and chronic diseases.