Evaluation of a plastic composite produced with residues of sugarcane bagasse and polypropylene wihtout additives

In this research the aim was produce and evaluate a plastic composite using recycled polypropylene (PP) and fibers from sugarcane bagasse residues (SC), without the use of additives. This analysis was based on laboratorial tests for physical and mechanical characterization, according to the standards ASTM D256-00, D638-101 and D570-98 were analyzed: water absorption, thickness swelling, impact resistance, tensile strength and its correspondent deformation. For comparison it was elaborated three different compositions: 100% PP; 80% PP+20%SC; 70%PP+30%SC. The results indicate a positive correlation with the content of fiber and water absorption and thickness swelling. In the tension tests, the composites with fibers increase the value of resistance for physical efforts, bringing advantages as durability and integrity of the material, showing a viability of the composites.

Soil greenhouse gas emissions and their relations to soil attributes in a sugarcane area

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Transições reversíveis de células de leveduras entre estados viáveis, mas não cultiváveis (VBNC) e estados viáveis e cultiváveis

Pós-graduação em Biotecnologia - IQ

Pré-hidrólise ácida de bagaço de cana-de-açúcar e sua caracterização físico-química

The biomass resulting from processing sugarcane bagasse has been considered a source of cellulose with the potential production of bio-fuels. This lignocellulose can be processed into ethanol since is hydrolyzed by chemical processes (acids) or biotechnology (enzymes) which generate sugars suit for fermentation. This study had the objective to utilize physical and chemical pre-treatment processes for prehydrolysis of sugarcane bagasse. The experimental treatment was adjusted at a factor of 4 X 2, by the combination of pre-hydrolysis timing (15, 30, 45 and 60 minutes) and sulfuric acid concentrations (7.0% and 9.0%) which was incubated at a temperature of 121° C in an autoclave. The treatment data was subjected to analysis of the variance and averages which were compared using the Tukey test with a probability of 5%. The results obtained showed that through pretreatment acid applied on the lignocellulose material, there was a significant break from the substrate fibers like cellulose, hemicellulose and lignin.

Lignases Production and Partial Purification of Mnp from Brazilian Fungal Isolate in Submerged Fermentation

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Glyphosate effects on sugarcane metabolism and growth

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Production of alcoholic beverage from ginger: study of fermentation process and final product quality

Introduction: In Brazil part of the production of ginger is of inadequate quality for export. The production of spirit from felt-over rhizomes is an alternative of great interest to producers of these rhizomes. Aim: Aiming to increase the value of felt-over rhizomes, this work aimed to study the use of ginger as a raw material for alcoholic beverage production. It was evaluated the effect of fermentation conditions on the components of fermented alcoholic, as well as, the quality of alcoholic distilled beverage of ginger. Methods: Dehydrated ginger passed by enzymatic hydrolysis-saccharification processes. The hydrolysate obtained was analyzed for sugar profile in HPLC. The alcoholic fermentation process followed the central composite rotational design for three factors: fermentation temperature (23 to 37ºC), time of fermentation (17 to 33 h) and concentration of inoculum (0.22 to 3.00%). The fermented alcoholic obtained was analyzed in HPLC for the contents of ethanol, methanol, glycerol and residual sugars. The distillated alcoholic beverage of ginger was analyzed for ethanol, methanol, acetaldehyde, ethyl acetate and higher alcohols in the gas chromatography (GC). In addition, copper content and acidity were analyzed Results: Sugar profile of the ginger hydrolysate revealed the presence of 77.8% of glucose. Data analysis of fermentation process showed influence of temperature on ethanol and methanol content of the fermented alcoholic of ginger. Time of fermentation had effect on glycerol content. All parameters of process had influence on residual sugars contents. The HPLC analysis has shown presence of methanol, ethyl acetate, aldehyde, acids, higher alcohols and esters in distilled alcoholic beverage of ginger. Conclusion: Fermented alcoholic of ginger with higher levels of ethanol can be obtained under the conditions of 1.5% w/w of inoculum, 30°C of temperature and 24 hours of fermentation time. In this condition of fermentation process the beverage of ginger had good quality.

Relação entre a concentração dos compostos fenólicos do mosto e a eficiência da fermentação alcoólica por subprodutos em processo contínuo

The objective of this work was to evaluate the relationship between phenolic compounds and alcoholic fermentation efficiency. The yield of sugarcanebyproducts (glycerol, acidity, and biomass) was determined in a continuous process at SaoManoel Sugarcane Mill, (Sao Paulo, Brazil) during the 2011/2012 harvest period. The Saccharomyces cerevisiae strain used as inoculum was the CAT-1. During the harvest, the endogenous yeast outcompeted the selected strain, hence eliminating it from the process. This research consists of a case of study on the ethanol production facility. FolinCiocauteau and methylene blue method was used to assess phenolic compounds. The efficiencyof the byproducts generated during the fermentation processwas calculated. Statistics analyses were carried out using Pearson correlation and its significance, by thet-test. We concluded that the phenolic compounds within the must could not be correlated to the byproducts’fermentation efficiency calculated during a continuous fermentation process.

Efeito prebiótico de xilo-oligossacarídeos produzidos a partir da hemicelulose de bagaço de cana-de-açúcar utilizando extração alcalina e hidrólise de xilanases fúngicas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Pré-tratamento do bagaço de cana-de-açúcar, hidrólise e sua caracterização química e estrutural, visando a produção de etanol de segunda geração

Pós-graduação em Biotecnologia - IQ

Determinação de açucares em bagaço de palha de cana-de-açúcar por cromatografia líquida de alta eficiência com detecção eletroquímica utilizando eletrodos de nanotubos modificados com óxidos metálicos

Pós-graduação em Química - IQ

Produção de amilases de Rhizopus microsporus var. oligosporus e hidrólise enzimática do bagaço de mandioca visando a produção de etanol por Saccharomyces cerevisiae

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação técnico-econômica da produção de enzimas celulolíticas por fermentação em estado sólido

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)