Environment for teaching and development of mobile robot systems

Using robots for teaching is one approach that has gathered good results on Middle-School, High-School and Universities. Robotics gives chance to experiment concepts of a broad range of disciplines, principally those from Engineering courses and Computer Science. However, there are not many kits that enables the use of robotics in classroom. This article describes the methodologies to implement tools which serves as test beds for the use of robotics to teach Computer Science and Engineering. Therefore, it proposes the development of a flexible, low cost hardware to integrate sensors and control actuators commonly found on mobile robots, the development of a mobile robot device whose sensors and actuators allows the experimentation of different concepts, and an environment for the implementation of control algorithms through a computer network. This paper describes each one of these tools and discusses the implementation issues and future works. © 2010 IEEE.

Networked control system for the guidance of a four-wheel steering agricultural robotic platform

A current trend in the agricultural area is the development of mobile robots and autonomous vehicles for precision agriculture (PA). One of the major challenges in the design of these robots is the development of the electronic architecture for the control of the devices. In a joint project among research institutions and a private company in Brazil a multifunctional robotic platform for information acquisition in PA is being designed. This platform has as main characteristics four-wheel propulsion and independent steering, adjustable width, span of 1,80m in height, diesel engine, hydraulic system, and a CAN-based networked control system (NCS). This paper presents a NCS solution for the platform guidance by the four-wheel hydraulic steering distributed control. The control strategy, centered on the robot manipulators control theory, is based on the difference between the desired and actual position and considering the angular speed of the wheels. The results demonstrate that the NCS was simple and efficient, providing suitable steering performance for the platform guidance. Even though the simplicity of the NCS solution developed, it also overcame some verified control challenges in the robot guidance system design such as the hydraulic system delay, nonlinearities in the steering actuators, and inertia in the steering system due the friction of different terrains. Copyright © 2012 Eduardo Pacincia Godoy et al.

Mobile application as a tool for urban traffic data collection and generation to advanced traveler information systems using Wi-Fi networks available in urban centers

This paper presents an Advanced Traveler Information System (ATIS) developed on Android platform, which is open source and free. The developed application has as its main objective the free use of a Vehicle-to- Infrastructure (V2I) communication through the wireless network access points available in urban centers. In addition to providing the necessary information for an Intelligent Transportation System (ITS) to a central server, the application also receives the traffic data close to the vehicle. Once obtained this traffic information, the application displays them to the driver in a clear and efficient way, allowing the user to make decisions about his route in real time. The application was tested in a real environment and the results are presented in the article. In conclusion we present the benefits of this application. © 2012 IEEE.

Mobile Robot navigation modelling, control and applications

This work presents and discusses the main topics involved on the design of a mobile robot system and focus on the control and navigation systems for autonomous mobile robots. Introduces the main aspects of the Robot design, which is a holistic vision about all the steps of the development process of an autonomous mobile robot; discusses the problems addressed to the conceptualization of the mobile robot physical structure and its relation to the world. Presents the dynamic and control analysis for navigation robots with kinematic and dynamic model and, for final, presents applications for a robotic platform of Automation, Simulation, Control and Supervision of Mobile Robots Navigation, with studies of dynamic and kinematic modelling, control algorithms, mechanisms for mapping and localization, trajectory planning and the platform simulator. © 2012 Praise Worthy Prize S.r.l. - All rights reserved.

Biomobile: sistema de identificação de usuários em dispositivos móveis na plataforma Android utilizando reconhecimento de faces a partir de vídeo

Pós-graduação em Ciência da Computação - IBILCE

Desenvolvimento de um sistema informatizado para coleta, armazenamento e processamento dos dados referentes à cesta básica do Município de Botucatu -SP

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Comparing support vector machines and artificial neural networks in the recognition of steering angle for driving of mobile robots through paths in plantations

The use of mobile robots turns out to be interesting in activities where the action of human specialist is difficult or dangerous. Mobile robots are often used for the exploration in areas of difficult access, such as rescue operations and space missions, to avoid human experts exposition to risky situations. Mobile robots are also used in agriculture for planting tasks as well as for keeping the application of pesticides within minimal amounts to mitigate environmental pollution. In this paper we present the development of a system to control the navigation of an autonomous mobile robot through tracks in plantations. Track images are used to control robot direction by pre-processing them to extract image features. Such features are then submitted to a support vector machine and an artificial neural network in order to find out the most appropriate route. A comparison of the two approaches was performed to ascertain the one presenting the best outcome. The overall goal of the project to which this work is connected is to develop a real time robot control system to be embedded into a hardware platform. In this paper we report the software implementation of a support vector machine and of an artificial neural network, which so far presented respectively around 93% and 90% accuracy in predicting the appropriate route. (C) 2013 The Authors. Published by Elsevier B.V. Selection and peer review under responsibility of the organizers of the 2013 International Conference on Computational Science

Development and characterization of microsatellite loci of microglanis cottoides (siluriformes: pseudopimelodidae) and cross-species amplification

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Development and characterization of 16 microsatellites for the Neotropical catfish Pseudoplatystoma reticulatum and cross species analysis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desenvolvimento de aplicações Web com base em modelagem 3D: módulo Android

This project brings the development of an Android application which will allow users to access 3D models on web. The application developed allows Android devices to access web pages which have code that should use OPENGL to renderize. To demonstrate this functionality, an example web application was build, using technologies such as X3DOM and HTML5, which uses WebGL to get renderized. This web application gives to the user an environment of a virtual city, where he could surf by and interact with the objects. The Android application brings this immersion to the mobile world, also. The access and storage of data was developed a Webserver, which bring to the web application a simple API to give access to the database

Desenvolvimento de objeto de aprendizagem para dispositivos móveis explorando os sensores internos do sistema operacional Android

The traditional model of teaching little is modernized in recent decades. When in contact with this system, it is normal that the new-generation students feel unmo tivated in carrying out the proposed activities in the classroom. Considers Prensky (2001) these students, called Digital Natives, born with a modern way of thinking and learn and feel encouraged and motivated with activities that invite to interact. For this reason, it has been proposed the development of an object of learning in the form of application for Android tablets, exploring the internal sensors available in them, with the purpose of offering an interactive activity to students on the physical concepts involved in the process of photosynthesis in plants. For the construction, informational texts written in didactic language and easy to understand, illustrative images and animations were employed. In addition, we used the light sensor in the interactive activity on the process of photosynthesis so that the student could observe and understand how the environment is able to interfere with this process

Desenvolvimento de um Game para Android O S

With the technology advancement, mobile devices have become increasingly more powerful and have started to have functions beyond of making phone calls. New applications, which perform these new functions, have been launched. The digital entertainment market has become one of the most benefited with this, once the games have become one of the most used applications for various types of users. This monograph presents the development of a game for Android OS, considering concepts like: physics, scenarios/views and character animation

Think: guia de desenvolvimento mobile ágil em equipes reduzidas

Currently, applications for smartphones and tablets, called apps, are becoming increasingly relevant and attract more attention from users and finally the developers. With the Application Stores, services provided by the company that maintains the platform, access to such applications is as or more simplified than to web sites, with the advantage of anenhanced user experience and focused on the mobile device, and enjoy natives resources as camera, audio, storage, integration with other applications, etc. They present a great opportunity for independent developers, who can now develop an application and make it availabl e to all users of that platform, at free or at a cost that is usually low. Even students may create their applications in the intervals of their classes and sell them in stores. Making use of tools and services, free or at low cost, anyone can develop quality applications, that can be marketed and have a large number of users even in adverse situations in which the application is not the focus of developer productivity. However, such to ols do not seem to be well used, or are unknown, or its purpose is not considered important, and this paper tries to show the real importance of these tools in the rapid development of quality software. This project presents several tools, services and practices, which together make it possible to develop an application for various mobile platforms, independently and with a team of a few people, as demonstrated. However, this paper aims not to say that the development of software today it is easy and simple, but there are currently a large set of tools, for various platforms, that assists and enhances the work of the programmer

Concepção e implementação de um serviço baseado em localização na plataforma ANDROID/GOOGLE

The mobile application proposed in this undergraduate project, classified as a Location-Based Service and named Traveller, was developed to support users of mobile phones equipped with GPS in unknown locations by providing information about weather, location of users and stores in urban areas. The mobile devices whose this project is intended are those equipped with Android. The programming language Java was selected and the Eclipse development environment was used along with the toolkit for developing Android (ADT - Android Development Tools)

Sistema de comunicação bluetooth voltada para automação residencial

Bluetooth technology found in smartphones and tablets can add an interesting feature focused on home automation. Through the implementation of a wireless network communication between a mobile device and receiver modules located in different points, or even on a single centralized point in residence, you can manage many household items with just a few taps on smartphones. With such applicability, allow the user greater integration with your home, comfort, safety and economy. In this context, this work presents a system design of low cost Bluetooth communication between a smartphone and a receiver module with microcontroller interface development control from the Android platform