A Comparison of Deep Drawing and Ironing of Metal Alloy Strip Produced conventionally and Non-conventionally via Semi Solid Material Processing

A semi solid thin strip continuous casting process was used to obtain 50%wt Pb/50%wtSn strip by single and twin roll processing at speed of 15 m/min. A 50%wt Pb/50%wtSn plate ingot was also cast for rolling conventionally into strips of 1.4 mm thickness and 45 mm width for comparison with those achieved non-conventionally. This hypoeutectic alloy has a solidification interval and fusion temperature of approximately 31 degrees C and 215 degrees C respectively. The casting alloy temperature was around 280 degrees C as measured by a type K immersion thermocouple prior to pouring into a tundish designed to maintain a constant melt flow on the cooling slope during semi solid material production. A nozzle with a weir ensures that the semi solid material is dragged smoothly by the lower roll, producing strip with minimum contamination of slag/oxide. The temperatures of the cooling slope and the lower roll were also monitored using K type thermocouples. The coiled semi solid strip, which has a thickness of 1.5 mm and 45 mm width, was rolled conventionally in order to obtain 1.2 mm thick strip. The coiled thixorolled strip had a thickness of 1.2 mm and achieved practically the same width as the conventional strips. Blanks of 40 mm diameter were cut from the strips in a mechanical press, ready for deep drawing and ironing for mechanical characterization. All the strips achieved from non-conventional processing had the same mechanical performance as those achieved conventionally. The limiting drawing ratio (LDR) achieved was approximately 2.0 for all strips. Microscopy examination was made in order to observe phase segregation during processing.

Numerical simulation of magnetic field enhanced plasma immersion ion implantation

The behavior of plasma and sheath characteristics under the action of an applied magnetic field is important in many applications including plasma probes and material processing. Plasma immersion ion implantation (PIII) has been developed as a fast and efficient surface modification technique of complex shaped three-dimensional objects. The PIII process relies on the acceleration of ions across a high-voltage plasma sheath that develops around the target. Recent studies have shown that the sheath dynamics is significantly affected by an external magnetic field. In this work we describe a two-dimensional computer simulation of magnetic field enhanced plasma immersion implantation system. Negative bias voltage is applied to a cylindrical target located on the axis of a grounded cylindrical vacuum chamber filled with uniform nitrogen plasma. An axial magnetic field is created by a solenoid installed inside the cylindrical target. The computer code employs the Monte Carlo method for collision of electrons and neutrals in the plasma and a particle-in-cell (PIC) algorithm for simulating the movement of charged particles in the electromagnetic field. Secondary electron emission from the target subjected to ion bombardment is also included. It is found that a high-density plasma region is formed around the cylindrical target due to the intense background gas ionization by the magnetized electrons drifting in the crossed ExB fields. An increase of implantation current density in front of high density plasma region is observed. (C) 2007 Elsevier B.V. All rights reserved.

Influence of Different Base Thicknesses on Maxillary Complete Denture Processing: Linear and Angular Graphic Analysis on the Movement of Artificial Teeth

Objective: The purpose of this study was to compare the dental movement that occurs during the processing of maxillary complete dentures with 3 different base thicknesses, using 2 investment methods, and microwave polymerization.Methods: A sample of 42 denture models was randomly divided into 6 groups (n = 7), with base thicknesses of 1.25, 2.50, and 3.75 mm and gypsum or silicone flask investment. Points were demarcated on the distal surface of the second molars and on the back of the gypsum cast at the alveolar ridge level to allow linear and angular measurement using AutoCAD software. The data were subjected to analysis of variance with double factor, Tukey test and Fisher (post hoc).Results: Angular analysis of the varying methods and their interactions generated a statistical difference (P = 0.023) when the magnitudes of molar inclination were compared. Tooth movement was greater for thin-based prostheses, 1.25 mm (-0.234), versus thick 3.75 mm (0.2395), with antagonistic behavior. Prosthesis investment with silicone (0.053) showed greater vertical change compared with the gypsum investment (0.032). There was a difference between the point of analysis, demonstrating that the changes were not symmetric.Conclusions: All groups evaluated showed change in the position of artificial teeth after processing. The complete denture with a thin base (1.25 mm) and silicone investment showed the worst results, whereas intermediate thickness (2.50 mm) was demonstrated to be ideal for the denture base.

Numerical simulation of magnetic-field-enhanced plasma immersion ion implantation in cylindrical geometry

Recent studies have demonstrated that the sheath dynamics in plasma immersion ion implantation (PIII) is significantly affected by an external magnetic field. In this paper, a two-dimensional computer simulation of a magnetic-field-enhanced PHI system is described. Negative bias voltage is applied to a cylindrical target located on the axis of a grounded vacuum chamber filled with uniform molecular nitrogen plasma. A static magnetic field is created by a small coil installed inside the target holder. The vacuum chamber is filled with background nitrogen gas to form a plasma in which collisions of electrons and neutrals are simulated by the Monte Carlo algorithm. It is found that a high-density plasma is formed around the target due to the intense background gas ionization by the magnetized electrons drifting in the crossed E x B fields. The effect of the magnetic field intensity, the target bias, and the gas pressure on the sheath dynamics and implantation current of the PHI system is investigated.

Homonymy in natural language processes: A representation using Pustejovsky's Qualia Structure and ontological information

This paper presents a proposal for the semantic treatment of ambiguous homographic forms in Brazilian Portuguese, and to offer linguistic strategies for its computational implementation in Systems of Natural Language Processing (SNLP). Pustejovsky's Generative Lexicon was used as a theoretical model. From this model, the Qualia Structure - QS (and the Formal, Telic, Agentive and Constitutive roles) was selected as one of the linguistic and semantic expedients for the achievement of disambiguation of homonym forms. So that analyzed and treated data could be manipulated, we elaborated a Lexical Knowledge Base (LKB) where lexical items are correlated and interconnected by different kinds of semantic relations in the QS and ontological information.

Coordinated views to assist exploration of spatio-temporal data: a case study

In this paper we focus on providing coordinated visual strategies to assist users in performing tasks driven by the presence of temporal and spatial attributes. We introduce temporal visualization techniques targeted at such tasks, and illustrate their use with an application involving a climate classification process. The climate classification requires extensive Processing of a database containing daily rain precipitation values collected along over fifty years at several spatial locations in the São Paulo state, Brazil. We identify user exploration tasks typically conducted as part of the data preparation required in this process, and then describe how such tasks may be assisted by the multiple visual techniques provided. Issues related to the use of the multiple techniques by an end-user are also discussed.

On the role of synchrony for neuron-astrocyte interactions and perceptual conscious processing

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

O processamento automático de línguas naturais enquanto engenharia do conhecimento linguístico

In this paper, we provide a brief description of the multidisciplinary domain of research called Natural Language Processing (NLP), which aims at enabling the computer to deal with natural languages. In accordance with this description, NLP is conceived as "human language engineering or technology". Therefore, NLP requires consistent description of linguistic facts on every linguistic level: morphological, syntactic, semantic, and even the level of pragmatics and discourse. In addition to the linguistically-motivated conception of NLP, we emphasize the origin of such research field, the place occupied by NLP inside a multidisciplinary scenario, their objectives and challenges. Finally, we provide some remarks on the automatic processing of Brazilian Portuguese language.

Powder processing and In Vivo evaluation of a titanium porous coating implant

The processing of titanium porous coatings using powder metallurgy technique to achieve a porous structure that allows osseointegration with bone tissue was discussed. The porous microstructure exhibited micropores and interconnected macropores with size ranges that allowed bone ingrowth. The macropores in the coatings were originated from the binder evaporation while the micropore was related with the porous titanium powder and the low compaction pressure used. The in vivo evaluation indicated that osseointegration had occurred between the bone and porous material.

Trypanosoma cruzi: Evaluation of (-)-cubebin derivatives activity in the messenger RNAs processing

No fully effective treatment has been developed since the discovery of Chagas' disease. Since drug-resistant Trypanosoma cruzi strains are occurring and the current therapy is effective in the acute phase but with various adverse side effects, more studies are needed to characterize the susceptibility of T. cruzi to new drugs. Pre-mRNA maturation in trypanosomatids occurs through a process called trans-splicing, which is unusual RNA processing reaction, and it implies the processing of polycistronic transcription units into individual mRNAs; a short transcript spliced leader (SL RNA) is trans-spliced to the acceptor pre-mRNA, giving origin to the mature mRNA. Cubebin derivatives seem to provide treatments with less collateral effects than benznidazole and showed similar or better trypanocidal activities than benznidazole. Therefore, the cubebin derivatives ((-)-6,6′-dinitrohinokinin (DNH) and (-)-hinokinin (HQ)) interference in the mRNA processing was evaluated using T. cruzi permeable cells (Y and BOL (Bolivia) strains) following by RNase protection reaction. These substances seem to intervene in any step of the RNA transcription, promoting alterations in the RNA synthesis, even though the RNA processing mechanism still occurs. Furthermore, HQ presented better activity against the parasites than DNH, meaning that BOL strain seems to be more resistant than Y. © 2011 Springer-Verlag.

Reduction of bacterial adhesion to biocompatible polymer surfaces via plasma processing

Plasma processing of the surfaces of biomaterials is interesting because it enables modification of the characteristics of a surface without affecting bulk properties. In addition, the results are strongly influenced by the conditions of the treatment. Therefore, by adjusting the plasma parameters it is possible to tailor the surface properties to best fulfill the requirements of a given application. In this work, polyurethane substrates have been subjected to sulfur hexafluoride glow discharge plasmas. The influences of different SF 6 plasma exposure times and pressures on the adhesion of Staphylococcus aureus and Pseudomonas aeruginosa to the polymer have been investigated. The wettability and surface free energy have been evaluated via contact angle measurements. At low pressure (6.7 Pa) the contact angle decreases with increasing exposure time in the 180 s to 540 s interval, but at higher pressure (13.3 Pa) it increases as a function of the same variable. Bacterial adhesion has been quantified from in vitro experiments by determining the growth of colonies on Petri dishes treated with agar nutrient. It has been observed that the surface properties play an important role in microbe adhesion. For instance, the density of adhered P. aeruginosa decreased as the surface contact angle increased. S. aureus preferred to adhere to hydrophobic surfaces. © 2011 by Begell House, Inc.

Wavelets in a problem of signal processing

In this work a new method is proposed for noise reduction in speech signals in the wavelet domain. The method for signal processing makes use of a transfer function, obtained as a polynomial combination of three processings, denominated operators. The proposed method has the objective of overcoming the deficiencies of the thresholding methods and the effective processing of speech corrupted by real noises. Using the method, two speech signals are processed, contaminated by white noise and colored noises. To verify the quality of the processed signals, two evaluation measures are used: signal to noise ratio (SNR) and perceptual evaluation of speech quality (PESQ).

Desenvolvimento de um sistema informatizado para coleta, armazenamento e processamento dos dados referentes à cesta básica do Município de Botucatu -SP

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Towards criterion validity in classroom language analysis: methodological constraints of metadiscourse and inter-rater agreement

This paper reports on a process to validate a revised version of a system for coding classroom discourse in foreign language lessons, a context in which the dual role of language (as content and means of communication) and the speakers' specific pedagogical aims lead to a certain degree of ambiguity in language analysis. The language used by teachers and students has been extensively studied, and a framework of concepts concerning classroom discourse well-established. Models for coding classroom language need, however, to be revised when they are applied to specific research contexts. The application and revision of an initial framework can lead to the development of earlier models, and to the re-definition of previously established categories of analysis that have to be validated. The procedures followed to validate a coding system are related here as guidelines for conducting research under similar circumstances. The advantages of using instruments that incorporate two types of data, that is, quantitative measures and qualitative information from raters' metadiscourse, are discussed, and it is suggested that such procedure can contribute to the process of validation itself, towards attaining reliability of research results, as well as indicate some constraints of the adopted research methodology.

The Acting in Group of Teachers as Possibility of Resignification of the Interpretation about the Writing Language

Front of the possibility of acting with the teachers who teach in schools of Early Childhood Education for children aged six years, about the re-siginification of the understanding of writing language and of the importance of the child in this age group establish a positive relationship with this mode of language, was developed in 2011, a project linked to the Teaching of UNESP titled “Depathologization learning of the writing and inclusive education: reflections and actions of the teacher of Early Childhood Education”. This project aims to identification of the actions, in the classroom, of the patologization and subsequent implementation of actions depathologization writing by teachers’ actions, considering the increasingly early systematization of formal education of this kind of language in kindergarten. To this end, procedures that characterize the collaborative methodology are adopted. Throughout the methodological course, the engagement of the teachers, of the coordination and of the direction was valued, which seemed to favor both the formation, as the maintenance of the group, were very important aspects to ensure the interaction between its members and the common interest in the reflection about the topic in question. This paper focuses attention on whether thematic axes highlight during the initial survey of the expectations of teachers subsequently addressed in theoretical and reflective meetings leading up to identification of actions the patologization and/or of the proposition of the actions despatologizadoras of the learning of the writing, and in what refers to the way they are addressed.