Cementation of fiber post: influence of the cement insertion techniques on the bond strength of the fiber post-root dentin and the quality of the cement layer.

The aim of this study was to assess the influence of resin cement insertion methods on the bond strength of a fiber post to root dentin and quality of the cement layer. Forty bovine single-roots (length =16 mm) were randomly allocated into four groups, according to the cement insertion methods (N.=10): Gr1- Lentulo drill #40, Gr2- Centrix syringe, Gr3- Explorer #5, Gr4- fiber post. The root canals were prepared at 12 mm, using preparation bur # 3 of a cylinder quartz-FRC post (Aesthet post-plus, Bisco). The fiber posts were cemented using a multi-step etch-and-rinse adhesive system (All Bond 2®, Bisco) and a dual-cured resin cement (Duolink, Bisco). Each root was cut into seven samples: four samples of 1.8 mm thickness for push-out testing, and three with 0.5 mm for cement layer quality analyzing. One-way ANOVA was used for the push-out test values and the One-Way Kruskal-Wallis (P<0.05) and Dunn (10%) tests for the cement layer analyzes. ANOVA showed that the cement layer quality was affected by the cement insertion methods (P=0.0044): Gr1 (3.8 ± 1.3a), Gr2 (3.2 ± 1.3a), Gr3 (5.2 ± 1.5a,b) and Gr4 (5.2 ± 1.5b) (Dunn test), whereas the bond strength (MPa) was not affected by cement insertion methods: G1 (4.2 ± 1.3), G2 (3.2 ± 1.8), G3 (4.5 ± 0.9), G4 (3.1 ± 1.3). The fiber posts should be cemented with the assistance of the lentulo drill or centrix syringe to promote the best cement layer results.

Smear layer removal for collagen fiber exposure after citric acid conditionings

Aim: The aim of the present study was to compare the removal of the smear layer and exposure of collagen fibers of the root surface following the application of five citric acid solution concentrations. Methods and Materials: Two hundred seventy (270) samples were equally divided into six groups (n=45) for treatment with saline solution (control) and five different concentrations of citric acid (0.5, 1, 2, 15, and 25 percent). Three acid application methods were used (passive, brushing, and burnishing) as well as three application periods (1, 2, and 3 minutes). A previously trained, calibrated (kappa score = 0.93), and blind examiner subsequently scored scanning electron micrographs (SEMs) of the samples. Statistical analyses were performed by using Kruskal-Wallis and Dunn's post-hoc tests. Results: According to the results obtained and within the limitations of the methodology used, the citric acid applications were more effective than the control treatment of applying saline solution (p<0.05). However, no statistically significant differences were observed among the three application methods and three application periods. Descriptive analyses showed that best results for exposure of collagen fibers were obtained with the application of citric acid at 25 percent by brushing for 1 or 3 minutes. Conclusions: The best results for exposure of collagen fibers in this study were obtained with application of citric acid at 25 percent by brushing for 1 or 3 minutes, even though there were no statistically significant differences among the groups. Clinical Significance: The best results for exposure of collagen fibers on root surfaces noted in this study were obtained with application of citric acid at 25 percent by brushing for 1 or 3 minutes. © 2010 Seer Publishing LLC.

Tri-state Space Vector Modulation for Three-phase integrated inverters

The aim of this work is to present a modified Space Vector Modulation (SVM) suitable for Tri-state Three-phase inverters. A standard SVM algorithm and the Tri-state PWM (Pulse Width Modulation) are presented and their concept are mixed into the novel SVM. The proposed SVM is applied to a three-phase tri-state integrated Boost inverter, intended to Photovoltaic Energy Applications. The main features for this novel SVM are validated through simulations and also by experimental tests. The obtained results prove the feasibility of the proposal. © 2011 IEEE.

Comparison of the ant assemblages in three phytophysionomies: Rocky field, secondary forest, and riparian forest - A case study in the state park of Ibitipoca, Brazil

Ant assemblages are almost all related with the vegetation composition and so can provide us important information for conservation strategies, which are especially relevant to an environmentally protected area. We sampled the ant fauna in three different phytophysionomies in order to verify if the composition of ant species is different among the areas, especially because one of the areas is a Rocky Field and there is little information about the ant fauna in this habitat. A total of 8730 individuals were registered and an NMDS analysis showed that the ant assemblies are different at the three phytophysionomies (Rocky Field, Riparian Forest, and Secondary Forest). This study shows that the species that compose the ant assemblies in different phytophysionomies are a reflex of the environment, supporting the hypothesis that the vegetational composition results in different compositions in the ant assembly. Vegetal composition is determinant in the formation of the litter and consequently in the occurrence of ant species that depend on this layer of organic matter for nesting and foraging. © 2012 Juliane Floriano Santos Lopes et al.

Effects of three restorative techniques in the bond strength and nanoleakage at gingival wall of Class II restorations subjected to simulated aging

Objective: To evaluate the effects of simulated aging in bond strength and nanoleakage of class II restorations using three different restorative techniques. Materials and methods: Class II preparations (n = 12) were restored using: FS - composite resin Filtek Supreme Plus (3M/ESPE); RMGIC + FS - resin-modified glass ionomer cement Vitrebond Plus (3M/ESPE) + FS; and FFS + FS - flowable composite resin Filtek Supreme Plus Flowable (3M ESPE) + FS. The teeth were assigned into two groups: Control and Simulated Aging - Thermal/Mechanical cycling (3,000 cycles, 20-80 °C/500,000 cycles, 50 N). From each tooth, two slabs were assessed to microtensile bond strength test (μTBS) (MPa), and two slabs were prepared for nanoleakage assessment, calculated as penetration along the restoration margin considering the penetration length (%) and as the area of silver nitrate particle deposition (μm2). Data were analyzed by two-way analysis of variance (ANOVA) followed by Tukey's post hoc test (p < 0. 05). Results: FS presented the highest μTBS to dentin (22. 39 ± 7. 55 MPa) after simulated aging, while the presence of flowable resin significantly decreased μTBS (14. 53 ± 11. 65 MPa) when compared to no aging condition. Both control and aging groups of RMGIC + FS presented the highest values of silver nitrate penetration (89. 90 ± 16. 31 % and 97. 14 ± 5. 76 %) and deposition area (33. 05 ± 12. 49 and 28. 08 ± 9. 76 μm2). Nanoleakage was not affected by simulated aging. Conclusions: FS presented higher bond strength and lower nanoleakage and was not affected by simulated aging. Use of flowable resin compromised the bond strength after simulated aging. Clinical relevance: The use of an intermediate layer did not improve the dentin bond strength neither reduced nanoleakage at the gingival margins of class II restorations under simulated aging conditions. © 2012 Springer-Verlag.

Report of cerebellar hypoplasia in three calves

Hereditary or acquired cerebellar hypoplasia (CH) is commonly diagnosed in Holstein, Guernsey, Shorthorn and Jersey cattle. Bovine viral diarrhea (BVD) has been associated to acquired CH due to viral infection during the second trimester of pregnancy. Stricken calf usually shows ataxia, hypermetria, opisthotonus, intentional tremor and wide-based stance when in standing position. Three newborn calves were referred to the FCAV/Unesp Veterinary Teaching Hospital because of neurological distress. The clinical presentation, similar in all cases, indicated CH. Two weeks later, clinical signs did not improve and euthanasia was performed. Macroscopic examination revealed a gelatinous serosanguineous fluid over the brain surface and within the cervical spinal canal. Histologically the cerebellum had disorganization of the internal granular layer and moderate disappearance of Purkinje cells. The observed clinical signs and nervous tissue lesions were consistent with congenital cerebellar syndrome, possibly associated to viral infection during fetal development. Despite CH has been assumed to be related to BVD, blue tongue and Akabane viruses, only the BVD etiology has been already identified in Brazil.

Guidelines for the integration of certifiable management systems in industrial companies

Organizations often operate in turbulent environments characterized by intense competitiveness, constant technological progress, new market requirements, and scarce natural resources. This scenario imposes the constant need for change in the operation and companies' management. The integration of certifiable management systems is an effective alternative in this sense. The objective of the present study is to propose guidelines for the integration of the ISO 9001 Quality Management System (QMS), ISO 14001 Environmental Management System (EMS) and OHSAS 18001 Occupational Health and Safety Management System (OHSMS) in industrial companies. These guidelines were developed based on a theoretical framework and on the results from fourteen case studies performed in Brazilian industrial companies. The proposed guidelines were divided into three phases: A) integration planning, b) integration development, and c) integration control and improvement.

Avaliação do cloridrato de tetraciclina na remoção da smear layer radicular, em diferentes concentrações, tempos e modos de aplicação. Análise através de microscopia eletrônica de varredura

Pós-graduação em Odontologia - FOAR

Estudo in vitro da eficácia de um gel de EDTA-T na remoção da smear layer da superfície radicular

Pós-graduação em Odontologia - FOAR

Caracterização por espectroscopia vibracional de filmes Layer-by-Layer contendo ftalocianina, polímeros condutores e gomas naturais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Feed type for induced molting of commercial layer hens

An experiment employing three hundred and twenty 81-week-old Lohmann LSL commercial-breed hens was conducted to compare alternative induced-molting methods with the conventional method (fasting). Induced molting lasted 28 days at most, production and quality being monitored for four periods of 28 days thereafter. A completely randomized experimental design with five treatments, eight replicates of eight birds each per plot was adopted. The following experimental treatments were applied until a loss of 26% of body weight was reached: T1 - fasting, T2 - wheat bran ad libitum, T3 - rice bran ad libitum, T4 - cracked rice ad libitum, T5 - ground alfalfa ad libitum. Birds were then fed production diet ad libitum, except for those on treatment T1 (fasting) which received 30, 60 and 100 g/bird/day and then feed ad libitum. During induced molting the birds were exposed to a natural photoperiod and at day 28 that period was increased by 30 minutes/week until reaching 16 hours of light/day. The characteristics evaluated during induced molting were: feed intake, body weight changes and laying percentage. In the post-molt period, performance (feed intake, laying percentage, egg weight, egg mass, feed conversion ratio per dozen and per egg mass and percentage of broken eggs) and egg quality (specific gravity, eggshell breaking strength, percentages of eggshell, yolk, and albumen, eggshell thickness, yolk color and Haugh unit) were evaluated. Every 28 days one egg was collected from each repetition for three consecutive days for quality assessment. The use of rice bran and wheat bran is viable as molting inducers since the birds given those treatments display performance and egg quality similar to those fasted during the induced molting and also because these ingredients promote easier handling, eliminates the need for grinding and feed-mixing equipment and, being less aggressive, provide greater bird welfare.

Stress distribution on dentin-cement-post interface varying root canal and glass fiber post diameters. A three-dimensional finite element analysis based on micro-C data

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Correspondence between the one-loop three-point vertex and the Y and Delta electric resistor networks

Different mathematical methods have been applied to obtain the analytic result for the massless triangle Feynman diagram yielding a sum of four linearly independent (LI) hypergeometric functions of two variables F-4. This result is not physically acceptable when it is embedded in higher loops, because all four hypergeometric functions in the triangle result have the same region of convergence and further integration means going outside those regions of convergence. We could go outside those regions by using the well-known analytic continuation formulas obeyed by the F-4, but there are at least two ways we can do this. Which is the correct one? Whichever continuation one uses, it reduces a number of F-4 from four to three. This reduction in the number of hypergeometric functions can be understood by taking into account the fundamental physical constraint imposed by the conservation of momenta flowing along the three legs of the diagram. With this, the number of overall LI functions that enter the most general solution must reduce accordingly. It remains to determine which set of three LI solutions needs to be taken. To determine the exact structure and content of the analytic solution for the three-point function that can be embedded in higher loops, we use the analogy that exists between Feynman diagrams and electric circuit networks, in which the electric current flowing in the network plays the role of the momentum flowing in the lines of a Feynman diagram. This analogy is employed to define exactly which three out of the four hypergeometric functions are relevant to the analytic solution for the Feynman diagram. The analogy is built based on the equivalence between electric resistance circuit networks of types Y and Delta in which flows a conserved current. The equivalence is established via the theorem of minimum energy dissipation within circuits having these structures.

SeP hole injection layer for devices based on organic materials

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Corn production for silage intercropped with forage in the farming-cattle breeding integration

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)