65 resultados para PAH
Resumo:
The nanoscale interactions between adjacent layers of layer-by-layer (LBL) films from poly(allylamine hydrochloride) (PAH) and azodye Brilliant Yellow (BY) have been investigated, with the films employed for optical storage and the formation of surface-relief gratings. Using Fourier transform infrared spectroscopy, we identified interactions involving SO3- groups from BY and NH3+ groups from PAH. These electrostatic interactions were responsible for the slow kinetics of writing in the optical storage experiments, due to a tendency to hinder photoisomerization and the subsequent reorientation of the azochromophores. The photoinduced birefringence did not saturate after one hour of exposure to the writing laser, whereas in azopolymer films, saturation is normally reached within a few minutes. on the other hand, the presence of such interactions prevented thermal relaxation of the chromophores after the writing laser was switched off, leading to a very stable written pattern. Moreover, the nanoscale interactions promoted mass transport for photoinscription of surface-relief gratings on PAH/BY LBL films, with the azochromophores being able to drag the inert PAH chains when undergoing the trans-cis-trans photoisomerization cycles. A low level of chromophore degradation was involved in the SRG photoinscription, which was confirmed with micro-Raman and fluorescence spectroscopies.
Resumo:
Humic acids (HAs), naturally occurring biomacromolecules, were incorporated into nanostructured polymeric films using the layer-by-layer (LbL) technique, in which HA layers were alternated with layers of poly(allylamine hydrochloride) (PAH). Atomic force microscopy (AFM) revealed very smooth films, with mean roughness varying from 0.89 to 1.19 nm for films containing 5 and 15 PAH/HA bilayers, respectively. The films displayed electroactivity, with the presence of only one reduction peak at ca. 0.675 V (vs Ag/AgCl). Such a well-defined electroactivity allowed the films to be used as highly sensitive pesticide sensors, with detection of pentachlorophenol (PCP) in solutions at concentrations as low as 10(-9) mol L(-1).
Resumo:
This study was designed to analyze the impact of diminished renal perfusion pressure due to renal clipping on the rat model of adriamycin nephropathy. Male Wistar rats, divided into four groups (n = 9 per group) were injected with saline as control (C), adriamycin 3 ml/kg (Ad), saline with the left renal artery clipped (Rv), and adriamycin plus clip (AdRv). After 24 weeks mean arterial pressure (MAP), inulin, and p-aminohippurate (PAH) clearances were performed to evaluate renal function. Morphologic analysis included histologic criteria of percentage of glomerulosclerosis and tubulointerstitial lesion index (TILI). The MAP (mm Hg) was similar between Rv (143 +/- 13) and AdRv (154 +/- 20), but higher (P < .05) than C (120 +/- 8) and Ad (124 +/- 11). Inulin clearance (mL/min/100 g) in Ad (0.2 +/- 0.05) was smaller than in C (0.53 +/- 0.17) and Rv (0.4 +/- 0.01) (P < .05), and was at an intermediate level in AdRv (0.33 +/- 0.2). The level of PAH (mL/min/100 g) was normal at 1.76 in C, and diminished more in Ad (0.58) than in Rv (1.06) and AdRv (1.18) (P < .05). Both Ad and the AdRv nonclipped kidneys had the highest degree of glomerulosclerosis (33% and 25%) and TILI (7% and 8%), respectively, compared with C and Rv (both 0%), whereas the clipped kidneys displayed intermediate degrees (9% and 5%) (P < .05 v nonclipped). The data suggest that diminished perfusion pressure of the clipped kidney, by decreasing the intraglomerular pressure, protects the glomerulus from damage and attenuates the evolution of adriamycin nephropathy. Am J Hypertens 1998;11:1124-1128 (C) 1998 American Journal of Hypertension, Ltd.
Resumo:
The interactions governing adsorption of layer-by-layer (LBL) films from an azopolymer, PS-119(R), and poly(allylamine hydrochloride) (PAH) have been controlled by modifying the pH of the solutions used to form the films. The thickness per bilayer was varied by one order of magnitude, from 10 to 240 A, as the pH changed from 4 to 10. Thick layers were formed at higher pHs because in this case the PAH is only partially charged adopting a loopy conformation. This change in molecular conformation caused the kinetics of isomerization and mass transport to be much slower than at lower pHs. The writing time defined as the time to achieve 50% of maximum birefringence dropped from 110 to 18 min for films prepared from solutions with pH 10 and pH 4, respectively. This decrease is probably due to the higher free volume for isomerization in the films prepared at lower pHs, in which PAH molecules are less coiled than at higher pHs. For the same reason, the rate of inscription of surface-relief gratings with an interference pattern of p-polarized light was also much slower at higher pHs. (C) 2003 Elsevier B.V. All rights reserved.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Background and objectives - The use of magnesium sulphate for the prevention of seizures in pre-eclampsia may induce hypermagnesemia. Clinical and experimental studies are not in agreement about the effects of magnesium on the renal hemodynamics and function. We therefore studied the effects of hypermagnesemia on the renal hemodynamics and function of dogs anesthetized with pentobarbitone. Methods - Sixteen mongrel dogs were anesthetized with pentobarbitone 30 mg.kg-1 and submitted to extracellular ) and mechanical ventilation with room air. The dogs were volume expansion with Ringer's solution (0.4 ml.kg.min allocated into two groups of 8 animals, for the study of renal hemodynamics and function following the administration of 5 mg.kg-1 of pentobarbitone (Group 1 - control or of pentobarbitone associated with magnesium sulphate in the dose (Group 2). The parameters studied were: PAH of 140 mg.kg, administered in 15 minutes, followed by 80 mg.kg-1.h-1 clearance, creatinine clearance, osmolar clearance, free water clearance, renal blood flow, renal vascular resistance, filtration fraction, urinary volume, plasmatic and urinary osmolarity, urinary and fractionary excretion of sodium and potassium, measured at five moments: 15 (M1), 30 (M2), 60 (M3) and 75 (M4) minutes after the first supplementary dose of pentobarbitone and 15 minutes (M5) after the second supplementary dose in Group 1. In Group 2, the moments M3, M4, M5 were 15, 30 and 60 minutes after the priming dose of magnesium sulphate and during the maintenance dose. Results - In Group I no significant changes were observed in renal hemodynamic parameters and creatinine clearance. The extracellular volume expansion increased urinary volume and decreased urinary osmolarity as a consequence of sodium, potassium and free water clearance. The fractionary excretion of sodium was maintained. The plasmatic osmolarity increased. In Group 2, renal hemodynamic parameters and creatinine clearance were also maintained. There was an increase in renal sodium clearance, as detected by the increase in the fractionary excretion of sodium. Conclusions - Magnesium sulphate did not produce significant changes in renal hemodynamics and facilitated the renal excretion of sodium in dogs anesthetized with pentobarbitone.
Resumo:
Background and Objectives - Allopurinol is a drug which inhibits the formation of noxious renal free radicals. The aim of this study was to evaluate the protecting renal effects of allopurinol in ischemic kidneys of dogs. Methods - Sixteen dogs were anesthetized with sodium pentobarbital and submitted to extracellular volume expansion (1.4 ml.kg-1.min-1), to mechanic ventilation with air, to right nephrectomy and to left renal artery clamping. Changes which might occur in renal morphology and function after 30 min of total ischemia and posterior reperfusion were studied in Group 1 (G1), in addition to the action of allopurinol (50 mg.kg-1) on those kidneys, when administered 24 h before the experiment and 1 h before the ischemic procedure in Group 2 (G2). The following parameters: heart rate, inferior vena cava pressure, mean blood pressure, PAH clearance (PAH(c)), renal blood flow (RBF), renal vascular resistance (RVR), creatinine clearance (Cr(c)), filtration fraction, urine output, plasma and urine osmolality, osmolar clearance, free water, sodium and potassium clearance, urine and fractional sodium and potassium excretion, hematocrit, rectal temperature, and left kidney histology were evaluated in four moments: M1 control, and M2, M3, M4 obtained immediately, 15 and 30 min after unclamping of the left renal artery. In G2, M1, M2, M3 and M4 were obtained 45, 90, 105, and 120 min after the second allopurinol dose. Results - Both groups showed the highest values for PAH(c), RBF, and Cr(c), and the lowest values for RVR in M1. Animals were tachycardiac since the beginning of the experiment both in G1 and in G2. The other parameters were not changed. Left kidney histological evaluation showed alterations compatible with acute tubular necrosis in both experimental groups. Conclusions - Alterations found in renal hemodynamics were compatible with the release of vasoconstrictor substances due to renal ischemia. Allopurinol was not effective in preventing renal alterations caused by ischemia and reperfusion.
Resumo:
The methacrylic copolymer functionalized with the azo chromophore 4-[N-ethyl-N-(2-hydroxiethyl)]-amino-2′-chloro-4-nitroazobenzene (MMADR13), in its polyelectrolyte form, can be used to fabricate thin films by the layer-by-layer (LbL) technique just if one alternates this anionic polyelectrolyte with a cationic polyelectrolyte such as poly(allylamine hydrochloride) (PAH). Since PAH does not present any particular optical functionality, the main final film feature will came from the side chain DR13 azo-chromophore group due to its large nonlinear optical properties and photoisomerization capabilities. This work reports the electrooptic activity of MMADR13/DR13 LBL films, which arises from the high hiperpolarizability about the azo side chain group.
Resumo:
Sophisticated molecular architectures can be produced with the layer-by-layer (LbL) method, which may combine distinct materials on the same film. In this study, we take advantage of this capability to produce cholesterol amperometric biosensors from LbL films containing hemoglobin (Hb) and cholesterol oxidase in addition to the polyelectrolytes poly(allylamine hydrochloride) (PAH) and poly(ethylene imine) (PEI). Following an optimization procedure, we found that an LbL film deposited onto ITO substrates, with the architecture ITO(PEI/Hb)5(PEI/COx)10, yielded a sensitivity of 93.4 μA μmol L-1 cm-2 for cholesterol incorporated into phospholipid liposomes, comparable to state-of-the-art biosensors. Hb acted as efficient electron mediator and did not suffer interference from phospholipids. Significantly, cholesterol could also be detected in real samples from chicken egg yolk, with no effects from potential interferents, including phospholipids. Taken together these results demonstrate the possible fabrication of low cost, easy-to-use cholesterol amperometric biosensors, whose sensitivity can be enhanced by further optimizing the molecular architectures of the LbL films. © 2012 Elsevier B.V.
Resumo:
Microparticles found in the air may be associated with organic matter that contains several compounds, such as Polycyclic Aromatic Hydrocarbons (PAHs) and nitro-PAHs, and may pose a significant risk to human health, possibly leading to DNA mutations and cancers. This study associated genotoxicity assays for evaluating human exposure with the atmospheric air of two urban areas in southern Brazil, that received different atmospheric contributions. Site 1 was under urban-industrial influence and the other was a non-industrial reference, Site 2. Organic extracts from the airborne particulate matter were tested for mutagenicity via the Salmonella/microsome assay and analyzed for PAH composition. Cells samples of people residing in these two cities were evaluated using the comet and micronucleus assay (MN).Concentrations of the individual PAHs ranged from 0.01ng/m3 (benzo[a]anthracene) to 5.08ng/m3 (benzo[ghi]perylene). As to mutagenicity analysis of airborne, Site 1 presented all the mutagenic responses, which varied from 3.2±1.22rev/m3 (TA98 no S9) to 32.6±2.05rev/m3 (TA98, S9), while Site 2 ranged from negative to minimal responses. Site 1 presented a high quantity of nitro and amino derivatives of PAHs, and peaked at 56.0±3.68rev/μg (YG1024 strain). The two groups presented very low DNA damage levels without intergroup difference. Although Site 1 presented high mutagenic responses in the air samples, high PAH levels, healthy people exposed to this environment did not show significative damage in their genetic material. However, the evaluation of different environmental and genetic damage in such population is necessary to monitor possible damages. © 2013 Elsevier Inc.
Resumo:
Pós-graduação em Anestesiologia - FMB
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Pós-graduação em Ciência e Tecnologia de Materiais - FC