Effect of nitrogen and application ways of a plant biostimulant on different wheat genotypes contrasting in stature

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Assessment of anaerobic sewage sludge quality for agricultural application after metal bioleaching

The effects of metal bioleaching on nutrient solubilization, especially nitrogen and phosphorous, from anaerobically-digested sewage sludge were investigated in this work. The assessment of the sanitary quality of the anaerobic sludge after bioleaching was also carried out by enumerating indicator (total coliforms, fecal coliforms, and fecal streptococci) and total heterotrophic bacteria. The experiments of bioleaching were performed using indigenous sulphur-oxidizing bacteria (Thiobacillus spp.) as inoculum and samples of anaerobically-digested sludge. Nitrogen and phosphorous solubilization from sewage sludge was assessed by measuring, respectively, the concentration of Total Kjeldahl Nitrogen, ammonia, nitrate/nitrite, and soluble and total phosphorous before and after the bioleaching assays. At the end of the experiment, after 4 days of incubation (final pH of 1.4), the following metal solubilization yields were obtained: zinc, 91%; nickel, 87%; copper, 79%; lead, 52%; and chromium, 42%. As a result of sludge acidification, the viable counts of selected indicator bacteria were decreased to below the detection limit (4 × 103 cfu 100 ml-1), followed by an increase in the mineral fraction of nitrogen (from 6 to 10%) and in the soluble fraction of phosphorous (from 15 to 30%). Although some loss of sludge nutrients can occur during solid-liquid separation following bioleaching, its beneficial effects as metal removal and reduction of pathogenic bacteria are sufficient to consider the potential of this treatment before sludge disposal onto agricultural fields.

Análise da sustentabilidade ambiental de um cultivo de ostras em um estuário tropical

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Determination of the oxygen and nitrogen interstitial diffusion coeficient in niobium by mechanical spectroscopy

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Doses and sources of nitrogen fertilizer and their effects on soil chemical properties and forage yield of Brachiaria brizantha cv. Xaraes

Forage plants, particularly the Brachiaria genus, are the main source of nutrients for cattle and are at times the only feed offered. The concentration of elements in the plant is related to the soil, fertilization, climate, season, variety, and cultural practices. An experiment on dystrophic Red-Yellow Latosol soil in Aracatuba, São Paulo was performed to evaluate the effects of the doses and sources of nitrogen fertilizers on the chemical properties of the soil and the dry matter yield of the grass Brachiaria brizantha cv. Xaraes. A randomized block design was employed involving three replicates in a 3 x 3 factorial, with three doses (100, 200 and 400 kg ha(-1) year(-1)) and three sources (Ajifer (R) L40, ammonium sulfate and urea) of nitrogen and a control treatment without nitrogen (zero). The greatest effects on the chemical properties of the soil as a function of nitrogen fertilization in the Xaraes grass were observed in the topsoil. The use of Ajifer (R) L40 and ammonium sulfate as sources of nitrogen had similar effects, with an increase in the sulfur content and a reduction in the soil pH at the superficial layer. The use of the fertilizers Ajifer (R) L40, ammonium sulfate and urea did not affect the micronutrient contents, except for Fe and Mn, and did not alter the sodium concentration or electrical conductivity of the soil. The dry matter yield of Xaraes grass was similar for all three nitrogen sources.

Air-particle abrasion on zirconia ceramic using different protocols: Effects on biaxial flexural strength after cyclic loading, phase transformation and surface topography

This study evaluated the effect of different air-particle abrasion protocols on the biaxial flexural strength and structural stability of zirconia ceramics. Zirconia ceramic specimens (ISO 6872) (Lava, 3M ESPE) were obtained (N=336). The specimens (N=118, n=20 per group) were randomly assigned to one of the air-abrasion protocols: Gr1: Control (as-sintered); Gr2: 50 μm Al2O3 (2.5 bar); Gr3: 50 μm Al2O3 (3.5 bar); Gr4: 110 μm Al2O3(2.5 bar); Gr5: 110 μm Al2O3 (3.5 bar); Gr6: 30 μm SiO2 (2.5 bar) (CoJet); Gr7: 30 μm SiO2(3.5 bar); Gr8: 110 μm SiO2 (2.5 bar) (Rocatec Plus); and Gr9: 110 μm SiO2 (3.5 bar) (duration: 20 s, distance: 10 mm). While half of the specimens were tested immediately, the other half was subjected to cyclic loading in water (100,000 cycles; 50 N, 4 Hz, 37 °°C) prior to biaxial flexural strength test (ISO 6872). Phase transformation (t→m), relative amount of transformed monoclinic zirconia (FM), transformed zone depth (TZD) and surface roughness were measured. Particle type (p=0.2746), pressure (p=0.5084) and cyclic loading (p=0.1610) did not influence the flexural strength. Except for the air-abraded group with 110 μm Al2O3 at 3.5 bar, all air-abrasion protocols increased the biaxial flexural strength (MPa) (Controlnon-aged: 1030±153, Controlaged: 1138±138; Experimentalnon-aged: 1307±184-1554±124; Experimentalaged: 1308±118-1451±135) in both non-aged and aged conditions, respectively. Surface roughness (Ra) was the highest with 110 μm Al2O3(0.84 μm. FM values ranged from 0% to 27.21%, higher value for the Rocatec Plus (110 μm SiO2) and 110 μm Al2O3 groups at 3.5 bar pressure. TZD ranged between 0 and 1.43 μm, with the highest values for Rocatec Plus and 110 μm Al2O3 groups at 3.5 bar pressure. © 2013 Elsevier Ltd.

Influence of Three Types of Abutments on Preload Values Before and After Cyclic Loading with Structural Analysis by Scanning Electron Microscopy

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Microstrain Around Dental Implants Supporting Fixed Partial Prostheses Under Axial and Non-Axial Loading Conditions, In Vitro Strain Gauge Analysis

The current study used strain gauge analysis to perform an in vitro evaluation of the effect of axial and non-axial loading on implant-supported fixed partial prostheses, varying the implant placement configurations and the loading points. Three internal hexagon implants were embedded in the center of each polyurethane block with in-line and offset placements. Microunit abutments were connected to the implants using a torque of 20 N.cm, and plastic prosthetic cylinders were screwed onto the abutments, which received standard patterns cast in Co-Cr alloy (n = 10). Four strain gauges (SGs) were bonded onto the surfaces of the blocks, tangentially to the implants: SG 01 mesially to implant 1, SG 02 and SG 03 mesially and distally to implant 2, respectively, and SG 04 distally to implant 3. Each metallic structure was screwed onto the abutments using a 10-N.cm torque, and axial and non-axial loads of 30 kg were applied at 5 predetermined points. The data obtained from the strain gauge analyses were analyzed statistically through the repeated measures analysis of variance and the Tukey test, with a conventional level of significance of P < 0.05. The results showed a statistically significant difference for the loading point (P = 0.0001), with point E (nonaxial) generating the highest microstrain (327.67 mu epsilon) and point A (axial) generating the smallest microstrain (208.93 mu epsilon). No statistically significant difference was found for implant placement configuration (P = 0.856). It was concluded that the offset implant placement did not reduce the magnitude of microstrain around the implants under axial and non-axial loading conditions, although loading location did influence this magnitude.

Morphogenic parameters and productivity of grass-Pioneer subjected to nitrogen

Objective of this work by evaluating the effect of nitrogen on forage yield and morphogenesis of elephant grass cv. Pioneer. The experimental design was randomized blocks with five replications, totaling 20 experimental units. Treatments consisted of four nitrogen levels (100, 200, 300 and 400 kg ha(-1) yr(-1)). The experiment was conducted under irrigated conditions. Evaluative cuts were made at 50 cm soil with values of light interception (95%) without pre-defined intervals. It was observed that N fertilization increased significantly (P<0.05) the production of dry matter per hectare, leaf appearance rate (leaves days(-1)tiller(-1)), leaf elongation rate (cm tiller(-1) day(-1)) and stem elongation rate (cm day(-1)). The process of this forage senescence is accelerated with increasing doses of nitrogen and leaf appearance rate, thereby reducing the phyllochron. It required a study on the economic viability of higher doses of nitrogen in grazed elephant grass cv. Pioneer.

Understanding growth mechanisms and tribocorrosion behaviour of porous TiO2 anodic films containing calcium, phosphorous and magnesium

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização da água da microbacia do córrego rico avaliada pelo índice de qualidade de água e de estado trófico

A avaliação do índice de qualidade da água (IQA) e do índice de estado trófico médio (IETm) pode subsidiar a formulação de planos de manejo e gestão de sistemas aquáticos. Neste trabalho, foi avaliada a qualidade da água da microbacia do Córrego Rico, que abastece a cidade de Jaboticabal (SP), utilizando o IQA e IETm. As amostragens de água foram realizadas entre setembro-2007 e agosto-2008, em três pontos: a) em uma das nascentes; b) após a Estação de Tratamento de Esgoto de Monte Alto, e c) na captação de água para abastecimento público de Jaboticabal. As amostras foram analisadas quanto aos parâmetros físicos, químicos e microbiológicos: temperatura, oxigênio dissolvido, pH, DBO5, nitrogênio total, fósforo total, turbidez, resíduo total, ortofosfato, clorofila-a e Escherichia coli. de acordo com os resultados obtidos, concluiu-se que: a) as atividades antrópicas às margens do Córrego Rico reduzem a qualidade de sua água, durante os diferentes períodos do ano; b) os valores médios de IQA nos três pontos analisados apresentaram relação direta com os valores médios de IETm, porém ocorreu maior discriminação da qualidade da água pelo IETm, identificando diferentes graus de trofia para os pontos e períodos de amostragens; c) o IQA apresentou melhor diferenciação da qualidade da água entre pontos no período seco e o IETm diferenciou melhor no período chuvoso; d) o processo de autodepuração e/ou a confluência do Córrego Tijuco com o Córrego Rico contribuem para melhor qualidade da água, tornando-a adequada ao abastecimento urbano após tratamento convencional.

Effects of different lipid levels on protozoa population, microbial protein synthesis and rumen degradability in cattle

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Chemical and physical attributes of two substratum for eucalypt seedling production

This work evaluated the viability of one commercial substrate with pinus bark, vermiculite and 30% of coconut fiber for Eucalyptus grandis seedlings production under different water management: 6, 8, 10, 12 e 14 mm day(-1). In relation to the substrates, it was evaluated, before and after the seedlings production, the total content of carbon, nitrogen and organic substances, pH and EC of the extract, the content of macronutrients (P, K, Ca, S, Mg) and macronutrients (B, Fe, Mn, Cu, Zn), as well as total porosity, density and water retention. It was evaluated the macro and mcronutrients accumulation in the roots and in the aerial part of the seedlings, 105 days after sowing. It was concluded that the substrates presented some distinct properties of those cited as ideal for production in containers with irrigation and fertilization. At the end of the production process, both substrates registered nutrient content little influenced by water management what would guarantee the initial development of the plants in the field.

Mineral supplementation and productivity of the Shiitake mushroom on eucalyptus logs

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Biodegradation of Coir and Sisal Applied in the Automotive Industry

This paper discusses the results of biodegradability tests of natural fibers used by the automotive industry, namely: coir, coir with latex, and sisal. The biodegradation of coir, coir with latex, and of sisal fibers was determined by monitoring the production of carbon dioxide (CO(2)) (IBAMA-E.1.1.2, 1988) and fungal growth (DIN 53739, 1984). The contents of total extractives, lignin, holocellulose, ashes, carbon, nitrogen and hydrogen of the fibers under study were determined in order to ascertain their actual content and to understand the results of the biodegradation tests. The production of CO(2) indicated low biodegradation, i.e., about 10% in mass, for all the materials after 45 days of testing; in other words, no material inhibited glucose degradation. However, the percentage of sisal fiber degradation was fourfold higher than that of coir with latex in the same period of aging. The fungal growth test showed a higher growth rate on sisal fibers, followed by coir without latex. In the case of coir with latex, we believe the fungal growth was not intense, because natural latex produces a bactericide or fungicide for its preservation during bleeding [1]. An evaluation of the materials after 90 days of aging tests revealed breaking of the fibers, particularly sisal and coir without latex, indicating fungal attack and biodegradation processes.