Numerical and experimental investigation of a vibration system with non-ideal vibration source

An excitation force that is not influenced by the system's states is said to be an ideal energy source. In real situations, a direct and feedback coupling between the excitation source and the system must always exist. This manifestation of the law of conversation of energy is known as Sommerfeld Effect. In the case of obtaining a mathematical model for such system, additional equations are usually necessary to describe the vibration sources and their coupling with the mechanical system. In this work, a cantilever beam and a non-ideal electric DC motor that is fixed to the beam free end is analyzed. The motor has an unbalanced mass that provides excitation to the system proportional to the current applied to the motor. During the motor's coast up operation, as the excitation frequency gets closer to the beam first natural frequency and if the drive power increases further, the DC motor speed remains constant until it suddenly jumps to a much higher value (simultaneously the vibration amplitude jumps to a much lower value) upon exceeding a critical input power. It was found that the Sommerfeld effect depends on some system parameters and the motor operational procedures. These parameters are explored to avoid the resonance capture in Sommerfeld effect. Numerical simulations and experimental tests are used to help insight this dynamic behavior.

Intercropping corn and kudzu in a rotation system with soybean

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Automatic dimming multi-lamp fluorescent management system with active input power factor corrector stage

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Real-time multi-sensors measurement system with temperature effects compensation for impedance-based structural health monitoring

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Analysis of depth of the microporosity in a nickel-chromium system alloy: effects of electrolytic, chemical and sandblasting etching

The present study was designed to analyse the average depth of the microporosity of a nickel-chromium (Ni-Cr) system alloy (Verabond II). The metal surface was subject to one of the following surface treatment: (i) Electrolytic etching in nitric acid 0.5 N at a current density of 250 mA cm(-2) ; (ii) chemical etching with CG-Etch etchant; and (iii) Sandblasting with alumina particles 50 mum. Half of the samples were polished before the surface treatments. The depth of porosity was measured through photomicrographs (500x) with a profilometer, and the data were statistically analysed using an analysis of variance (anova) followed by Tukey's test. The conclusions were (i) Differents surface treatment of the Ni-Cr system alloy lead to different depths of microporosity; (ii) the greatest depth of porosity was observed in non-polished alloy; (iii) the greatest and identical depth of microporosity was observed following electrolytic etching and chemical etching; (iv) the least and identical depth of microporosity was observed with chemical etching and sandblasting with alumina particles 50 mum, and (v) Chemical etching showed an intermediary depth.

Human Platelet Antigen Genotype Is Associated With Progression of Fibrosis in Chronic Hepatitis C

Although progression of fibrosis in the chronic hepatitis C depends on environmental, viral, and host factors, genetic polymorphisms have been associated recently with this progression, including the expression of integrins, adhesion proteins. Some integrins expressed on the platelet membrane show polymorphic antigenic determinants called human platelet antigens (HPA), where the major ones are HPA-1, -3, -5. The association between HCV infection and HPA-5b has been demonstrated. Similarly, the HPA profile could determine if HPA is related to progression of fibrosis. The goal of this study was to evaluate the association between the frequencies of HPA-1, -3, and -5 and degree of fibrosis in HCV-infected patients. Genomic DNA from 143 HCV-infected patients was used as the source for HPA genotyping by PCR-SSP or PCR-RFLP. Progression of fibrosis was evaluated using the METAVIR scoring system, and the patients were grouped according to degree of fibrosis into G1 (n = 81, with F1, portal fibrosis without septa or F2, few septa) and G2 (n = 62, with F3, numerous septa, or F4, cirrhosis). Statistical analysis was performed using the proportional odds model. The genotypic frequency of HPA-1a/1b was significantly higher in the patients in G2. To evaluate the influence of the time of infection to the development of fibrosis and its effect on the genetic factor HPA-1, 96 patients from 143 studied were evaluated considering the time of HCV infection, and these results suggest that the HPA-1a/1b genotype promotes the development of fibrosis in HCV infection with time. J. Med. Virol. 84: 56-60, 2012. (C) 2011 Wiley Periodicals, Inc.

Existence and asymptotic behaviour for the parabolic-parabolic Keller-Segel system with singular data

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Charged three-body system with arbitrary masses near conformal invariance

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

On stick-slip homoclinic chaos and bifurcations in a mechanical system with dry friction

In this paper we consider a self-excited mechanical system by dry friction in order to study the bifurcational behavior of the arisen vibrations. The oscillating system consists of a mass block-belt-system which is self-excited by static and Coulomb friction. We analyze the system behavior numerically through bifurcation diagrams, phase portraits, frequency spectra and Poincare maps, which show the existence of nonhomoclinic and homoclinic chaos and a route to homoclinic chaos. The homoclinic chaos is also analyzed analytically via the Melnikov prediction method. The system dynamic is characterized by the existence of two potential wells in the phase plane which exhibit rich bifurcational and chaotic behavior.

On a nonlinear and chaotic non-ideal vibrating system with shape memory alloy (SMA)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Interactions in the Agrobacterium-soybean system and capability of some Brazilian soybean cultivars to produce somatic embryos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A fuzzy inference system for identification of crossflow filtration processes

The crossflow filtration process differs of the conventional filtration by presenting the circulation flow tangentially to the filtration surface. The conventional mathematical models used to represent the process have some limitations in relation to the identification and generalization of the system behavior. In this paper, a system based on fuzzy logic systems is developed to overcome the problems usually found in the conventional mathematical models. Imprecisions and uncertainties associated with the measurements made on the system are automatically incorporated in the fuzzy approach. Simulation results are presented to justify the validity of the proposed approach.

3-BOSON SYSTEM WITH ABSORPTIVE SHORT-RANGE POTENTIAL

We study the properties of the three-boson system with absorption, through a short range interaction in the limit where the range reduces to zero. We derive an analytic expression for the three-boson width that relates it to the real part of the three-boson energy, two-boson binding energy and decay constant. One of the characteristics of this expression is that, in this limit, the ratio between the width and the three-boson binding energy is proportional to the range.

A hydride generation flow system for determination of arsenic and selenium by total reflection X-ray fluorescence spectrometry

In this work, a preconcentration and separation system based on continuous flow hydride generation is proposed to improve the determination of As and Se by total reflection X-ray fluorescence spectrometry. The generated hydrides are continuously separated from the liquid phase and collected in a chamber containing 250 mul of HCI/HNO3 1:1 (v/v) solution. Hydride generation conditions and collection of the hydrides were evaluated. Under optimised conditions, enrichment factors of 55 for As and 82 for Se were attained. Detection limits of 0.3 mug l(-1) for As and Se were obtained when 20 ml of sample was used. Analysis of a natural water standard reference material from National Institute of Standard and Technology (SRM-1640) was in agreement with the certified values at the 95% confidence level. (C) 2004 Elsevier B.V. All rights reserved.