78 resultados para Imagens aéreas
Resumo:
Pós-graduação em Agronomia (Energia na Agricultura) - FCA
Resumo:
The Vazante Fault Zone (VFZ), located northwestward of Minas Gerais, host the largest zinc deposit known in the Brazilian territory. This structure is hosted in Vazante’s Group rocks, a metassedimentary sequence of marine environment. Near Vazante is situated the south end of the VFZ. To the west, occur the Serra do Garrote inflexion, characterized by a curvature in the contact of Formations Serra do Garrote and Serra do Poço Verde. This structure is through the analysis of aerial imagery of the region and represented in the published geological maps. The objective of this work is to understand what causes this inflexion and determine whether it affects the VZF, causing a shift in the same, and possibly, in the mineralization as well. To this end, it was done a mapping work in the region covering the Serra do Garrote inflexion and the south end of the VFZ, in 1:25.000 scale, supplemented by petrographic description of thin section and geologic sections, with cooperated to the understanding of the structural evolution of the region. Data analysis allowed the identification of six deformation phases. The D1 an D2 phases generated the main foliation. The D3 phase generate kink bands folds, with NS axis and vertical axial plane. The fourth phase is responsible for generating the Vazante Fault Zone. The fifth phase produces low angle folds and shear zones, subparallel to S1//S2. The last phase generates folds with NW axis and vertical axial plane, with causes the inflection of lithologic contactas. Field observations also make possible the conclusion that the Vazante Fault Zone presents a south continuation, which is affected by deformation associated to D6 phase attributing to the trace of the VFZ a curved geometry, similar to that exhibited by lithologic contacts between units of the map
Resumo:
Currently, the dam of Salto Grande is very degraded. Water quality is seriously amended, and lack of riparian vegetation, as well as the advance of feed crops and land occupation in areas that should be permanently preserved, only complicate this situation. The permanent preservation area is essential for the water sources protection, soil erosion control and consequent watercourse sedimentation. Through aerial photography, using GIS techniques, it was able to identify the outwards bounds of the dam, to demarcate the permanent preservation areas and generate maps for land use. With this data, in addition to studies and ideas of reforestation in different environments, the development of a plan for restoration of degraded areas surrounding the dam is easier to be done. This study confirmed that about 72% of land use in permanent preservation areas is not in accordance with specific laws, making necessary its recovering.
Resumo:
The work depicts the study of geological and geotechnical characteristics presents, together with an analysis of the physical environment components and evaluation of its units, along a marginal stretch at Rodovia Amparo-Morungaba (SP-360) in order to present a geological and geotechnical map, 1:25.000 scale (one of the objectives of the work). There was also a geotechnical assessment of the present geological processes and the development of corrective measures necessary to establish safe conditions for road traffic. The method for the characterization of geological and geotechnical analysis was integrated the physical components associated with photo interpretation (another objective of this work) based on Google Earth´s air images along the referred highway. In addition, field studies were made that helped in the distribution and compartmentalization of the six geological and geotechnical units and profiles of each specific alteration were also made. The finals results present the above mentioned map, a detailed description of each of the six units and a a geotechnical assessment of the present geological processes and the development of corrective measures necessary to establish safe conditions for road traffic. Also, had success at photo interpretation based on Google Earth´s air images, obtaining stereoscopy
Resumo:
In this paper, a method is proposed to refine the LASER 3D roofs geometrically by using a high-resolution aerial image and Markov Random Field (MRF) models. In order to do so, a MRF description for grouping straight lines is developed, assuming that each projected side contour and ridge is topologically correct and that it is only necessary to improve its accuracy. Although the combination of laser data with data from image is most justified for refining roof contour, the structure of ridges can give greater robustness in the topological description of the roof structure. The MRF model is formulated based on relationships (length, proximity, and orientation) between the straight lines extracted from the image and projected polygon and also on retangularity and corner injunctions. The energy function associated with MRF is minimized by the genetic algorithm optimization method, resulting in the grouping of straight lines for each roof object. Finally, each grouping of straight lines is topologically reconstructed based on the topology of the corresponding LASER scanning polygon projected onto the image-space. The results obtained were satisfactory. This method was able to provide polygons roof refined buildings in which most of its contour sides and ridges were geometrically improved.
Resumo:
Pós-graduação em Geociências e Meio Ambiente - IGCE
Resumo:
Pós-graduação em Agronomia (Energia na Agricultura) - FCA
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Em Santa Bárbara D'Oeste,SP, foram realizados dois mapeamentos do uso da terra em área de 14.625 ha. No primeiro utilizou-se fotografias aéreas verticais pancromáticas (data de 25/6/78), na escala 1:35.000, e no segundo utilizou-se imagens orbitais do satélite LANDSAT-5 com sensor Thematic Mapper (data de 12/8/91), escala 1: 100.000, nas bandas 3, 4 e 5 e composição colorida 3/4/5. Para auxiliar a confecção desses mapas, obteve-se chaves de interpretação, tanto para as aerofotos como para as imagens orbitais. As fotografias aéreas proporcionaram um maior nível de detalhamento na identificação do uso da terra. A banda 3 e a composição colorida 3/4/5 foram as mais eficientes entre as imagens orbitais. Entre 1978 e 1991, a área de ocorrência de cana-de-açúcar permaneceu a mesma, as áreas de mata e pastagem diminuíram, enquanto que as áreas de reflorestamento e urbana aumentaram. Essa região teve sua capacidade de uso enquadrada, na maior parte, na classe IV: terras mais apropriadas para pastagens ou plantas perenes como a cana-de-açúcar, devendo-se aplicar técnicas intensivas de conservação, e com aptidão baseada em práticas agrícolas que refletem um alto nível tecnológico.
Resumo:
Foram estudados, com o auxílio de fotografias aéreas, aspectos qualitativos e quantitativos do relevo e da rede de drenagem de solos de uma área de Santa Bárbara D'Oeste, SP. Esta região compreende 14.625 ha, onde foram selecionadas bacias hidrográficas de 3ª ordem de ramificação e amostras circulares de 5km². As unidades de mapeamento simples ou associações de solos são: Latossolo Vermelho Escuro, Podzólico, Litossolo + Podzólico, Terra Roxa Estruturada + Latossolo Roxo distrófico. Após a caracterização das feições fisiográficas, da área de ocorrência desses solos, foram realizados dois mapas morfopedológicos. No primeiro utilizou-se fotografias aéreas verticais pancromáticas na escala 1: 35.000 (data de 25/6/78) e no segundo imagens orbitais do sensor Thematic Mapper do LANDSAT-5, nas bandas 3, 4 e 5 e composição colorida 3/4/5 na escala 1: 100.000 (data de 12/9/91). As análises qualitativas e quantitativas do relevo (índice de declividade média) e rede de drenagem (densidade de drenagem, freqüência de rios, razão de textura) mostraram-se eficientes na diferenciação das unidades de solo estudadas, tanto em bacias hidrográficas como em amostras circulares. A utilização de fotografias aéreas, permitiu maior riqueza de detalhes na precisão dos limites das unidades de mapeamento e no maior número de unidades de mapeamento discriminadas em relação as imagens orbitais. A composição colorida 3/4/5 permitiu diferenciar os Latossolos argilosos dos Latossolos de textura média, assim como o Latossolo Húmico.
Resumo:
Imagens CCD/CBERS-2, nas bandas espectrais CCD2, CCD3 e CCD4, dos anos de 2004 e 2005, de Mirante do Paranapanema - SP, foram transformadas em reflectância de superfície usando o modelo 5S de correção atmosférica e normalizadas radiometricamente. O objetivo principal foi caracterizar espectralmente áreas de pastagens de Brachiaria brizantha em fase de florescimento, isentas e infectadas com a doença mela-das-sementes da braquiária, possibilitando a sua detecção por meio da comparação entre os valores de reflectância de superfície denominada de Fator de Reflectância Bidirecional de Superfície (FRBS). Teve-se, também, o objetivo de avaliar a eficácia das imagens CCD/CBERS-2 para a obtenção de respostas espectrais de pastagens. Os dosséis sadios e doentes da Brachiaria brizantha foram identificados por meio da análise dos valores de reflectância e dos dados observados no Índice de Estresse Hídrico Acumulativo Relativo da Cultura (ACWSI) obtidos na área de estudo. Os resultados indicaram que as principais diferenças foram a diminuição da reflectância na banda CCD3 e o aumento da reflectância na banda CCD4 nas áreas doentes. A metodologia empregada com o uso de dados do sensor CCD/CBERS-2, associados ao ACWSI, mostrou-se eficaz para discriminar dosséis infectados com a mela-das-sementes da braquiária.
Resumo:
The spatial resolution improvement of orbital sensors has broadened considerably the applicability of their images in solving urban areas problems. But as the spatial resolution improves, the shadows become even a more serious problem especially when detailed information (under the shadows) is required. Besides those shadows caused by buildings and houses, clouds projected shadows are likely to occur. In this case there is information occlusion by the cloud in association with low illumination and contrast areas caused by the cloud shadow on the ground. Thus, it's important to use efficient methods to detect shadows and clouds areas in digital images taking in count that these areas care for especial processing. This paper proposes the application of Mathematical Morphology (MM) in shadow and clouds detection. Two parts of a panchromatic QuickBird image of Cuiab-MT urban area were used. The proposed method takes advantage of the fact that shadows (low intensity - dark areas) and clouds (high intensity - bright areas) represent the bottom and top, respectively, of the image as it is thought to be a topographic surface. This characteristic allowed MM area opening and closing operations to be applied to reduce or eliminate the bottom and top of the topographic surface.
Resumo:
As lesões tendíneas nas extremidades distais dos membros estão entre as mais freqüentes alterações do aparelho locomotor na rotina clínico-cirúrgica humana e animal e, não raro, necessitam de terapias adjuvantes para seu completo retorno às funções fisiológicas. O ultra-som terapêutico (UST) é a modalidade mais utilizada nas clínicas de reabilitação para tratar lesões tendíneas, mas devido à falta ou a divergências de estudos específicos sobre seus efeitos no tecido ósseo, sua utilização sobre as regiões distais dos membros, ricas em protuberâncias ósseas e áreas desprovidas de cobertura muscular, sempre preocuparam os profissionais da área médica. No intuito de esclarecer os efeitos do UST sobre o tecido ósseo, seis cães receberam tratamento ultra-sônico contínuo, de 1MHz, durante cinco minutos diários, por um período de 20 dias sobre a região craniodistal do rádio e da ulna. A intensidade do UST aplicada foi de 0,5W cm-2 no membro torácico direito, ficando o membro contralateral como controle. A região distal de ambos os membros torácicos foi radiografada para análise de densitometria óssea em imagens radiográficas, antes do início da terapia e ao final do tratamento. Não houve alterações significativas de densidade mineral óssea entre os membros tratados e os controles. Conclui-se que dentro dos parâmetros utilizados no experimento a utilização do UST em regiões ósseas protuberantes ou desprovidas de cobertura muscular pode ser feita com segurança.
Resumo:
Three types of imagery were evaluated for mapping drainage patterns and vegetation in a 100 000 ha area of Sao Paulo State, Brazil. The drainage measurements were drainage density, frequency of channels and texture ratio, studied on circular samples of 10 km2 for panchromatic photography and 100 km2 for radar and satellite images. The vegetation types were forest, pasture, sugar cane and rice, studied on circular samples of 100 km2. Radar images were the most convenient method to study drainage patterns and the land forms of large areas, while Landsat imagery was most efficient for the study of vegetative cover, although panchromatic photographs were the most accurate method.-from Field Crop Abstracts
Resumo:
Presents a study of the spectral response of a specific vegetative cover under the same soil elevation angle, but in different classes of slope, through Landsat transparencies. The site located in the region of Presidente Prudente was studied through topo sheets to define the classes of slope. Densitometric readings were obtained of selected areas, representing the terrain reflectance in different relief conditions. The cluster analysis was used to classify the densitometric data according to the classes of slope. The map of classes of slope/reflectance of the terrain surface showed a high correlation, mainly for the classes A (0-10%) and B (10-20%). -from English summary