Spectral analysis and low-frequency multipath mitigation for kinematic applications

Low-frequency multipath is still one of the major challenges for high precision GPS relative positioning. In kinematic applications, mainly, due to geometry changes, the low-frequency multipath is difficult to be removed or modeled. Spectral analysis has a powerful technique to analyze this kind of non-stationary signals: the wavelet transform. However, some processes and specific ways of processing are necessary to work together in order to detect and efficiently mitigate low-frequency multipath. In this paper, these processes are discussed. Some experiments were carried out in a kinematic mode with a controlled and known vehicle movement. The data were collected in the presence of a reflector surface placed close to the vehicle to cause, mainly, low-frequency multipath. From theanalyses realized, the results in terms of double difference residuals and statistical tests showed that the proposed methodology is very efficient to detect and mitigate low-frequency multipath effects. © 2008 IEEE.

Lidar observation campaign of sugar cane fires and industrial emissions in the State of São Paulo, Brazil

Brazil has an important role in the biomass burning, with the detection of approximately 100,000 burning spots in a single year (2007). Most of these spots occur in the southern part of the Amazon basin during the dry season (from August to november) and these emissions reach the southeast of the country, a highly populated region and with serious urban air pollution problems. With the growing demand on biofuels, sugarcane is considerably expanding in the state of São Paulo, being a strong contributor to the bad air quality in this region. In the state of São Paulo, the main land use are pasture and sugarcane crop, that covers around 50% and 10% of the total area, respectively. Despite the aerosol from sugarcane burning having reduced atmospheric residence time, from a few days to some weeks, they might get together with those aerosol which spread over long distances (hundreds to thousands of kilometers). In the period of June through February 2010 a LIDAR observation campaign was carried in the state of São Paulo, Brazil, in order to observe and characterize optically the aerosols from two distinct sources, namely, sugar cane biomass burning and industrial emissions. For this purpose 2 LIDAR systems were available, one mobile and the other placed in a laboratory, both working in the visible (532 nm) and additionally the mobile system had a Raman channel available (607 nm). Also this campaign counted with a SODAR, a meteorological RADAR specially set up to detect aerosol echoes and gas-particle analyzers. To guarantee a good regional coverage 4 distinct sites were available to deploy the instruments, 2 in the near field of biomass burning activities (Rio Claro and Bauru), one for industrial emissions (Cubatão) and others from urban sources (São Paulo). The whole campaign provide the equivalent of 30 days of measurements which allowed us to get aerosol optical properties such as backscattering/extinction coefficients, scatter and LIDAR ratios, those were used to correlate with air quality and meteorological indicators and quantities. In this paper we should focus on the preliminary results of the Raman LIDAR system and its derived aerosol optical quantities. © 2010 Copyright SPIE - The International Society for Optical Engineering.

Versatile and easy-to-assemble measurement system for impedance-based structural health monitoring

In this paper we present a versatile and easy-to-assemble measurement system for structural health monitoring (SHM) based on the electromechanical impedance (EMI) technique. The hardware of the proposed system consists only of a common data acquisition (DAQ) device with external resistors and allows real-time data acquisition from multiple sensors. Besides the low-cost compared to conventional impedance analyzers, the hardware and the software are simple and easier to implement than other measurement systems that have been recently proposed.

Practical comparisons among electronic energy meters, a precision energy meter and IEEE1459 for reactive energy measurements, under unbalanced and non-sinusoidal conditions

This paper presents a practical experimentation for comparing reactive/non-active energy measures, considering three-phase four-wire non-sinusoidal and unbalanced circuits, involving five different commercial electronic meters. The experimentation set provides separately voltage and current generation, each one with any waveform involving up to fifty-first harmonic components, identically compared with acquisitions obtained from utility. The experimental accuracy is guaranteed by a class A power analyzer, according to IEC61000-4-30 standard. Some current and voltage combination profiles are presented and confronted with two different references of reactive/non-active calculation methodologies; instantaneous power theory and IEEE 1459-2010. The first methodology considers the instantaneous power theory, present into the advanced mathematical internal algorithm from WT3000 power analyzer, and the second methodology, accomplish with IEEE 1459-2010 standard, uses waveform voltage and current acquisition from WT3000 as input data for a virtual meter developed on Mathlab/Simulink software. © 2012 IEEE.

Palatoplastia com biomembrana natural de látex com polilisina 0,1% em cães com defeito palatino experimentalmente induzido

The palatoplasty is a correction surgery to restore the isolation between the oral and nasal cavity, avoid breath of food. There are many techniques to repair palatal defects, and the most used is mucoperiosteal flap. Grafts and prothesis, can be used too. Scientific works with Natural Latex Biomembrane with 0,1% Polylisine reveals properties like biocompatibility, improve and accelerate the cicatricial process, the stimulation of new vessels and organized tissue growth in different organs. Seven dogs were arranged in two groups and were submitted to experimental hard palate cleft. Five dogs received palatal repair with the natural latex biomembrane with 0,1% polylisine. Two animals did not receive any repair (control group) and the defect healing by second intention. After surgery, the groups were observed macroscopically and clinically to evaluate the results. The healling of cleft palate of group I was faster than control group, and this fact suggests that the biomembrane is an accelerator factor for cicatricial process.

Desenvolvimento e implementação de um sistema para detecção de falhas em estruturas usando microcontrolador

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desenvolvimento de sistema de aquisição e processamento para aplicações em qualidade de energia

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeitos do exercício prévio de intensidade supramáxima sobre a cinética do consumo de oxigênio em ciclistas treinados

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Aplicação do modelo de potência crítica na cinética do consumo de oxigênio em exercício supramáximo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeito do exercício prévio sobre os parâmetros da cinética do VO2 durante o exercício moderado em ciclistas e indivíduos sedentários

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

O uso de um sistema LC-ESI-IT-TOF/MS e MSn na prospecção de novos componentes peptídicos do veneno da vespa social Polybia paulista

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito das plantas medicinais Curcuma zedoaria e Camellia sinensis no controle da halitose

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Papel dos índices de pressões inspiratórias e de respiração rápida e superficial na predição da reintubação em terapia intensiva

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação de diferentes frações inspiradas de oxigênio em cães anestesiados com infusão contínua de propofol e rocurônio, mantidos em ventilação controlada a pressão

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Padronização de questionário para avaliação de conhecimento sobre avulsão e reimplante dentário, validado pela Teoria de Resposta ao Item (TRI)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)