Controle de qualidade em raios-x convencional

The progress in radiology is related with the development of new systems of image formation with the lesser dose in the pacient. The improve of the dose in the pacient, without compromising the quality of the image, is one of the responsibilities of a medical physicist in a sector of diagnosis for image. This research has as objective to evaluate the conditions of use of an equipment of x-rays, from tests of quality control. The results gotten in this work have been part of data of an Effective Program of Quality Control (PECQ) of the sector of diagnosis for image of the Hospital das Clínicas da Faculdade de Medicina de Botucatu - UNESP (HCFMB-UNESP)

Controle de qualidade e levantamento radiométrico em aparelho de Raios-X médico convencional

Along with the advance of technology, in terms of the expansion of medical exams that uses the ionizing radiation for diagnosis, there is also the concern about quality control for maintaining quality in radiographic imaging and for delivering low dose to the patient. Based on the Federal Order 453 of the Secretariat of Health Surveillance, which takes account of the practical and justification of individual medical exposures, the optimization of radiological protection, limitation of individual dose, and the prevention of accidents, were done through this paper radiodiagnostic tests on medical equipment in order to accept it or not, according to SVS-453. Along with the help and support of P&R Consulting and Medical Physics Marilia, SP, were made Quality Control and Radiometric Control in equipment from various cities across the state of São Paulo. The equipment discussed in this work is classified as conventional X-ray. According to the Federal Order SVS-453, the quality control in the program of quality assurance should include the following minimum set of constancy tests, with following minimum frequency: biennial tests for representative values of dose given to the patients of radiography and CT performed in the service; annual tests for accuracy of the indicator tube voltage (kVp), accuracy of exposure time, half-value layer, aligning the central axis of the beam of x-ray tube, performance (mGy / mA.min.m²), linearity of the rate of kerma on air with the mAs, reproducibility of the kerma on air rates, reproducibility of the automatic exposure, focal spot size, integrity of accessories and clothing for individual protection; semiannually for collimation system accuracy; weekly for temperature processing system and sensitometry processing system. For the room Radiometric Survey it was done a sketch...(Complete abstract click electronic access below)

Modelagem computacional das túnicas cardíacas para processamento e controle de qualidade

This paper considers a study of the anatomical features of the cardiac system and a three-dimensional model of the different tunics that comprise the heart wall, for processing and quality control of radiological images. The structures are built by the layer overlapping method, where a layer can be understood as a slice of the three-dimensional object. The pericardium, myocardium and endocardium were represented with three-dimensional cylinders and hexagons. The spatial arrangement of the cardiac system is determined by an background image of a real model, which values are defined according to the shape of the region and on the anatomical patients characteristics. The results are significant, considering the anatomical structures details, as well as the representation of the thicknesses of the regions of the heart wall. The validation of the anatomical model was accomplished through comparisons with dimensions obtained from a real model and allows verifying that the model is appropriate. The degree of representation will allow the verification of the influence of radiological parameters, morphometric peculiarities and stage of the diseases on the quality of the images, as well as on the performance of the Computer-Aided Diagnosis (CAD).

Efeito da utilização de diferentes critérios de controle de qualidade dos genótipos em estudos de associação e seleção genômica ampla

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Controle de qualidade e obtenção de extratos de espécies vegetais do cerrado brasileiro com potencial etnofarmacológico

ANVISA (National Health Surveillance Agency) has published in recent years, laws that regulate the stages of the control of plants derivatives, including tests of macro and microscopic botanical identification, phytochemical determination, tests of authenticity and purity, microbiological testing, among other parameters. All the analytical procedures of plant drugs control required by law must be based on the Brazilian Pharmacopoeia, other Pharmacopoeias recognized by ANVISA or quality control guides of plant species published by the World Health Organization (WHO). This study aimed to evaluate some pharmacognostic, phytochemical screening and microbiological control of plant species of the Brazilian cerrado, which have indicated ethnopharmacological: Byrsonima intermedia (Bi), Bauhinia holophylla (Bh) and Myrcia bella (Mb). In addition, certain parameters were determined for obtaining extracts from plants sprayed and dried. These data are important to obtain new scientific information from Brazilian plants with therapeutic potential.

Controle de qualidade da vitamina C em produtos acabados

Vitamin C is vulnerable to oxidative degradation and then the aim of this study was conducting a literature review about quality control of vitamin C in finished products. The conclusion is determined multiple emulsions and products which contain encapsulant materials are able to protect it from oxidation ensuring its efficacy.

Método para controle da qualidade de medicamentos sólidos por difração de raios X

Pós-graduação em Química - IQ

Controle de qualidade no plantio convencional e mecanizado de cana-de-açúcar

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Boas práticas de fabricação (bpf), análise de tomate e água em restaurantes da cidade de Botucatu-SP

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Aplicação da abordagem estatística no contexto da gestão da qualidade: um survey b com indústrias de alimentos de São Paulo

Nas últimas duas décadas, o crescimento do interesse pela metodologia Seis Sigma intensificou a aplicação da abordagem estatística e de outras abordagens quantitativas com o intuito de melhorar não apenas a qualidade de produtos, serviços e processos, como também aumentar o desempenho organizacional e o processo de tomada de decisão. Este artigo trata da aplicação da abordagem estatística no contexto da gestão da qualidade em indústrias de alimentos de médio e grande porte do Estado de São Paulo com o propósito de: identificar quais ferramentas e técnicas estatísticas são mais amplamente empregadas por indústrias do setor para garantir e controlar a qualidade; avaliar a interdependência entre o sucesso da implementação de programas de qualidade e segurança alimentar como Boas Práticas de Fabricação (BPF) e sistema de Análise de Perigos e Pontos Críticos de Controle (APPCC) e o uso de estatística; e analisar estimativas do grau de relevância do pensamento estatístico e de seus benefícios como ferramenta de melhoria da qualidade. Um survey exploratório-descritivo foi realizado e os resultados revelaram que a abordagem estatística começa a ser mais valorizada nas indústrias de alimentos pela relevância de seus benefícios assim como já ocorre em outros setores. Há evidências de que a implantação bem sucedida dos programas de segurança alimentar seja uma condição primordial para o uso efetivo de estatística e de outras abordagens quantitativas.

Efeitos da adição de açúcar na qualidade sensorial de amostras de cachaça obtida tradicionalmente e redestilada

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Qualidade bacteriológica de águas de irrigação de hortas nos municípios Araraquara, Boa Esperança do Sul e Ibitinga, SP

Pós-graduação em Alimentos e Nutrição - FCFAR

Discussão da utilização do controle estatístico de processo: análise bibliométrica e estudo de caso em uma empresa do setor alimentício

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação da qualidade de óleos de fritura utilizados em restaurante universitário

Frying is a widely used method of preparing food, because it is a very fast and convenient process, and because it provides specific characteristics of color, flavor, odor, and texture, besides having great consumer acceptance. Therefore, the interest in the physiological effects that oils heated at high temperatures can cause to the human body arises. The aim of this work was to analyze the levels of frying used oil alteration in different kinds of foods served at the university restaurant at “Instituto de Biociências, Letras e Ciências Exatas” (IBILCE), in São José do Rio Preto-SP. In addition, it aims to make the restaurant aware of the good ways to fry and the commitment of providing good quality food to students and professionals of the Institute. With this purpose, determination of total polar compounds, conjugated dienoic acids, peroxide value, and fatty acid profile were analyzed. Two rapid tests were also used: 3M Fat Monitor and Oil Test kit. The results were compared with limits recommended for the disposal of oils and fats used in frying by the Brazilian Health Surveillance Agency (ANVISA), by other countries, and by other researches. Thus, it was concluded that the university restaurant provides the consumers with fried food of good quality, since none of the analyses showed results above recommended, although there is a need of improvement in the quality control of the oil used, in order to avoid unnecessary costs to the university restaurant.