Design and implementation of a dc-dc converter based on variable structure control of switched systems

This paper presents a control method for a class of continuous-time switched systems, using state feedback variable structure controllers. The method is applied to the control of a non-trivial dc-dc power converter and a simple and inexpensive control circuit design, that was simulated using the software PSpice, is proposed. The design is based on Lyapunov-Metzler-SPR systems and the performance of the resulting control system is superior to that afforded by a recently proposed alternative sliding-mode control technique. © 2011 IFAC.

Straightforward systematic approach for fuel efficiency and emissions assessment in automotive systems

At this time, each major automotive market bares its own standards and test procedures to regulate the vehicle green house gases emissions and, thus, fuel consumption. Hence, much are the ways to evaluate the overall efficiency of motor vehicles. The majority of such standards rely on dynamometer cycle tests that appraise only the vehicle as a whole, but fail to assess emissions for each component or sub-system. Once the amount of work generated by the power source of an ICE vehicle to overcome the driving resistance forces is proportional to the energy contained in the required amount of fuel, the power path of the vehicle can be straightforwardly modeled as a set of mechanical systems, and each sub-system evaluated for its share on the total fuel consumption and green house gases emission. This procedure enables the estimation of efficiency gains on the system due to improvement of particular elements on the vehicle's driveline. In this work a simple systematic mechanical model of an arbitrary smallsized hatch back was assembled and total required energy calculated for different regulatory cycles. All the modeling details of the energy balance throughout the system are presented. Afterward, each subsystem was investigated for its role on the fuel consumption and the generated emission quantified. Furthermore, the application of the modeling technique for different sets of sub-systems was introduced. Copyright © 2011 SAE International.

Performance of laying hens and economic viability of different climatization systems

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Removal of a combination of endocrine disruptors from aqueous systems by seedlings of radish and ryegrass

Endocrine disruptors (EDs) are widespread in the environment, especially aquatic systems, and cause dangerous effects on wildlife and humans. This work was aimed to assess the capacity of radish (Raphanus sativus L.) and ryegrass (Lolium perenne L.) seedlings to tolerate and remove two combinations of EDs containing bisphenol A (BPA), 17α-ethynilestradiol (EE2), and linuron from four aqueous media: distilled water, a solution of natural organic matter (NOM), a lake water and a river water. Seeds of the two species were germinated in each contaminated medium and, at the end of germination, the seedling growth was evaluated by biometric measurements and residual EDs were quantified by chromatographic analysis. Biometric measurements revealed that the phytotoxicity of the two combinations of EDs depended on the medium used. Radish showed a discrete tolerance in distilled water and lake water but was inhibited in the solution of NOM and river water. Ryegrass was negatively affected mainly in river water. The concentration of each ED appeared significantly reduced in all media in the presence of seedlings of both species, but not in the blanks without plants. In 5 days, radish removed up to 88% of BPA, 100% of EE2 and 42% of linuron, and in 6 days ryegrass removed up to 92% of BPA, 74% of EE2 and 16% of linuron. The considerable removal capacity of radish and ryegrass in all media tested encourages the use of phytoremediation to remove EDs from waters. © 2013 Copyright Taylor and Francis Group, LLC.

Effects of flunixin meglumine administration on physiological and performance responses of transported feeder cattle

The objective was to evaluate the effects of flunixin meglumine administration on physiological and performance responses of transported cattle during feedlot receiving. Forty-five Angus x Hereford steers were ranked by BW on d 0 and assigned to 1 of 3 treatments:1) transport for 1,280 km in a commercial livestock trailer and administration of flunixin meglumine (1.1 mg/kg BW; intravenous) at loading (d 0) and unloading (d 1; FM), 2) transport for 1,280 km in a commercial livestock trailer and administration of 0.9% saline (0.022 mL/kg BW; intravenous) at loading (d 0) and unloading (d 1; TRANS), or 3) no transport and administration of 0.9% saline (0.022 mL/kg BW; intravenous) concurrently with loading (d 0) and unloading (d 1) of FM and TRANS cohorts (CON). Upon arrival and processing for treatment administration on d 1, steers within each treatment were ranked by BW and assigned to 15 feedlot pens (5 pens/treatment, 3 steers/pen). Full BW was recorded before (d -1 and 0) treatment application and at the end of experiment (d 28 and 29) for ADG calculation. Total DMI was evaluated daily from d 1 to 28. Blood samples were collected on d 0 (before treatment administration), 1 (after unloading but before treatment administration), 4, 7, 10, 14, 21, and 28. Body weight shrink from d 0 to 1 was less (P < 0.01) in CON vs. FM and TRANS but similar (P = 0.94) between TRANS and FM. Mean ADG was greater (P <= 0.04) in CON vs. FM and TRANS but similar (P = 0.69) between TRANS and FM. No treatment effects were detected on DMI, but CON had greater G:F vs. TRANS (P = 0.08) and FM (P = 0.02), whereas G:F was similar (P = 0.68) between TRANS and FM. Mean plasma cortisol concentrations tended (P <= 0.09) to be greater in TRANS vs. FM and CON but was similar (P = 0.87) between CON and FM. Plasma NEFA concentrations were greater (P <= 0.02) for TRANS and FM vs. CON on d 1 and greater (P <= 0.04) for FM vs. TRANS and CON on d 4. Plasma ceruloplasmin concentrations were greater (P <= 0.03) for TRANS vs. CON on d 1, 4, and 7, greater (P <= 0.05) for TRANS vs. FM on d 4 and 7, and greater (P <= 0.04) for FM vs. CON on d 1 and 4. Plasma haptoglobin concentrations were greater (P < 0.01) for TRANS vs. CON and FM on d 1 and 4 and greater (P <= 0.05) for FM vs. CON on d 1 and 4. In conclusion, flunixin meglumine reduced the cortisol and acute-phase protein responses elicited by road transport but did not improve receiving performance of feeder cattle.

Limit Cycles for a Class of Continuous and Discontinuous Cubic Polynomial Differential Systems

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Nanotechnological Strategies for Vaginal Administration of Drugs-A Review

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Metacommunity organisation, spatial extent and dispersal in aquatic systems: patterns, processes and prospects

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Surface engineering of silica nanoparticles for oral insulin delivery: characterization and cell toxicity studies

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Editorial dynamics and control of aerospace and vertical transportation systems

This Special Issue presents a selection of papers initially presented at the 11th International Conference on Vibration Problems (ICOVP-2013), held from 9 to 12 September 2013 in Lisbon, Portugal. The main topics of this Special Issue are linear and, mainly, nonlinear dynamics, chaos and control of systems and structures and their applications in different field of science and engineering. According to the goal of the Special Issue, the selected contributions are divided into three major parts: “Vibration Problems in Vertical Transportation Systems”, “Nonlinear Dynamics, Chaos and Control of Elastic Structures” and “New Strategies and Challenges for Aerospace and Ocean Structures Dynamics and Control”.