408 resultados para Fusão alcalina


Relevância:

10.00% 10.00%

Publicador:

Resumo:

In this work polymeric composites reinforced with cotton fibers, from the textile industry, were developed in order to manufacture printed circuit boards. It was used expanded polystyrene (EPS) as a thermoplastic matrix by melting it. For the obtention of 10% and 15% of fiber volume fraction in cotton fibers composites, it was used wasted cotton fibers as an incentive of recycling and reusing of the domestic and industrial wastes as well as for Expanded Polystyrene(EPS). The mechanical properties of the composites were evaluated by tensile and flexural strength from standardized test methods. Composites were characterized by a Scanning Electron Microscopy (SEM), Thermogravimetry (TG/DTG), Differential Scanning Calorimetry (DSC) and dielectric analysis. The analysis of the results showed that fiber in the composite directly influenced in the thermal and mechanical properties

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This project is about a book-report, which will discuss the nipo-brazilian’s identity. The Kasato-Maru ship arrived at Santos about a hundred years ago, opening a path that would never be closed: the path between Japan and Brazil, countries both geographically and culturally opposite. Miscegenation brings the nipo-brazilian to life, a individual who does not feel entirely Brazilian or Japanese. The goal of the book is to discuss the nipo-brazilian’s identity, once known that this individual can adopt one or other culture, or even merge both. It is not intended to conclude anything, so the main objective fulfills itself in the research of the possibilities of identities through interviews, theories, Japanese immigration’s history and Brazilian’s culture

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The mining of sand, currently, is essential for urban growth, by providing input for the building industry. The consequences of this mining activity to environmental triggers may be severe and irreversible. Among the major impacts caused by sand mining the riparian vegetation removal is detached. The riparian vegetation is essential for balance and maintaining the local ecosystem. For all that had been shown, is possible to verify the importance of environmental studies in areas wich there are mining. This study aimed specially to assess environmental impacts triggered by a mining, located near the headwaters of the stream Mandu, situated in Ajapi, District of Rio Claro-SP. For this purpose, we used remote sensing techniques and GIS to produce thematic maps of slope, pedology, geology, land use and occupation of the soil, and riparian vegetation, using the capabilities of GIS / ArcGIS. The slope map was based on data from the Cartographic IGC 1979, scale 1:10,000. For the production of pedological and geological maps were used Semi-Detailed soil survey of the state of São Paulo, 1981 (1:100,000) and the Geological Map of Zaine (1994), scale 1:50,000, respectively. Since the maps of Use and Land Occupation and Riparian Forest were obtained by visual interpretation of the image of CBERS 2010 following the merger between the HRC and CCD images. From these mappings, and through multi-criteria analysis, map of susceptibility to erosion was made, which supported the environmental assessment of the studied area, indicating susceptible and unsuitable areas for the deployment of economic activities and urban sprawl. This study serves as a model can be replicated in other watersheds, assisting in the proper use planning and land use, aiming at the rational use of natural resources

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In this work polystyrene composites reinforced with recycled sisal fibers were processed, in order to apply in the manufacture of printed circuit boards. A thermoplastic matrix of recycled polystyrene was used, this material came from waste expanded polystyrene (EPS) used in appliance's packages. Composites were prepared with 15% and 25% of sisal fibers. To obtain the composites, wasted EPS and natural sisal fibers were chosen, to encourage recycling and reuse of household waste and also the use of renewable resources. The composites were analyzed by standard tensile and flexural test, in order to verify the mechanical properties of the material. The characterization of the composite was done by scanning electron microscopy (SEM) , thermogravimetry (TGA / DTG) , differential scanning calorimetry (DSC) and dielectric analysis . The analysis of the results showed that the percentage of fibers in the composite influences directly the thermal and mechanical properties. Plates with a lower percentage of fibers showed superior properties at a higher percentage. The composite material obtained is easy to process and it's use is feasible for the confection of printed circuit boards, considering it's mechanical, thermal and insulative properties

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Osteosarcoma is the primary osseous neoplasia frequently diagnosed in dogs and it’s the main answerable for more than 85% of the neoplasias origened from the skeleton. The average age of onset of the lesion is 7 years, especially in large breeds and giant, with males being more affected than females. In general, 75% of osteosarcomas develop in the appendicular skeleton and 25% in the axial. The forelimbs are more affected than the hindlimbs, since support 60% of body weight. The osteosarcoma diagnosis is made by the analys of the animal’s clinic historic, detailed physique exams, blood exams alkaline phosphatase, xray exams, cytology, biopsy. The treatment of choice is the amputation associated to the chemotherapy. However, in some cases the member is preserved by the allograft technic. The chemotherapy associated to the surgery reduces the total load of the tumor, lengthens the interval of the life and improves the quality of pacient’s life. The most used medicines are cisplatin and doxorubicin. They can be used in separated or associated ways. The prognostic of dogs with osteosarcoma is reserved

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Aiming to reduce the cost of electrocatalysts and a greater resistance to CO poisoning this work was to study the adsorption and oxidation of carbon monoxide on ordered intermetallic phases AuIn, AuSb2, AuSn, PdSb and PdSn using voltammetric techniques in alkaline electrolyte solution. The results suggest that the AuSn and PdSn intermetallics has some form of resistance to CO poisoning. It is assumed that this behavior is a result of electronic effect and the effect of the third body has been achieved by adding a second metal to Au and Pd. However, further studies should be conducted to confirm this hypothesis as to test these materials as electrocatalysts in the reaction of oxidation of fuels

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The objective of the present work was to evaluate surface of experimental alloy Ti-7.5Mo after hydrothermal treatment. Ingots were obtained in arc melting furnace under an argon atmosphere and then homogenized under vacuum at 1100ºC for 86.4 ks to eliminate chemical segregation and after cold worked discs were cutting and grinding. For surface treatment, samples were immersed in a container with NaOH aqueous solution 5M, autoclaved, washed with distilled water. Followed, samples were heat treated and they were soaking in 5xSBF to form an apatite layer on the surface. Surfaces were investigated by, scanning electron microscopy, X-Rays powder diffraction, atomic force microscopy and contact angle, in order to evaluate the wettability of the alloy surface. The results were compared with our previous studies using the group of chemical surface treatments and results shows better condition is 120 minutes in the autoclave

Relevância:

10.00% 10.00%

Publicador:

Resumo:

As they have excellent mechanical properties, corrosion resistance and biocompatibility, much research has been conducted with respect to biomedical applications of titanium alloys. This work aims to study the experimental system binary alloy Ti-15Mo, in the raw state of fusion and heat treatment after homogenization, solubilization and calcination (simulating conditions employed for nanotube growth) targeting biomedical applications. Samples were obtained by casting the components in an electric arc furnace with inert atmosphere of argon. After obtaining the alloy, it was heat treated at three different heat treatments, namely homogenizing, calcining and simulation solubilization. The phases present were analyzed by X-ray diffraction, optical microscopy and microhardness testing

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Pós-graduação em Agronomia (Genética e Melhoramento de Plantas) - FCAV

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Pós-graduação em Medicina Veterinária - FCAV

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This paper describes the prepositions sob and sobre in the Functional Discourse Grammar framework (HENGEVELD; MACKENZIE, 2008) aiming at checking their lexical or grammatical status on the basis of classification criteria postulated by Keizer (2007). The following aspects point to their lexical status : (i) they consist of an Ascription Subact; (ii) they contain a specific content on the vertical axis signaling inferiority and superiority position in relation to a limit; (iii) they are not required by any predicate, but they are predicates by themselves, which require complementation by an argument playing Reference semantic function; (iv) they may be combined with de, em, para and por; which are genuine grammatical prepositions; and, finally, (v) they are not subjected to any phonological process of reduction and fusion.