Produção de carvão vegetal a partir da madeira de Eucalyptus saligna clone SI70 com tres anos e meio de idade

Charcoal is obtained from carbonization, much used in the steel industry for ore reduction, using as raw material the Eucalyptus. The present study aims to verify whether the main Eucalyptus saligna genetically modified produce quality charcoal with only 3.5 years old. The study was done with material collected from three trees, divided into five discs removed at 0, 25 , 50 , 75 and 100 % of the commercial height of the tree. The procedures adopted were based on standards published by ABNT. The results were satisfactory for the parameters: basic wood density with an average of 0.39 ± 0.0082 g / cm ³; volatile materials from coal with an average of 19.35 ± 3.27 %, fixed carbon content of the coal with an average of 75.62 ± 3.40 % and gross calorific value of coal with an average of 4694.43 cal / g, and unsatisfactory results for ash content averaging 5.03 ± 0.23 when compared to the values found in the literature. It was concluded that the studied wood is able to produce charcoal, but the factors of production should be better observed, such as heating time which exerted direct influence on the determination of ash content

Estudo comparativo das madeiras de cecropia palmata (imbaúba) e eucalyptus grandis para produção de celulose e papel

Pós-graduação em Ciência Florestal - FCA

Variabilidade entre materiais genéticos de eucalyptus spp quanto à distribuição de raízes finas em latossolos profundos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Transpiração e eficiência de uso da água em plantios puros e mistos de eucalyptus grandis e acacia mangium

Pós-graduação em Ciência Florestal - FCA

Novel inorganic pyrophosphatase from soil metagenomic and family and subfamily prediction

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

MetaPPase by in silico analyses predicting the novel gene operate as H+ pumps.

The lastyears declined the discovery of compounds to use in industrial and naturaldiversity has been the best supplier for novel genes, enzymes and compounds inhigh demand by the biotechnology industry. We know immense diversity of microorganisms,yet most remains unexplored. For these reason we use the metagenômica approach toinvestigate the potential of uncultured microorganisms. With this purpose weused the metagenomic library of from Eucalyptus spp. arboretum (EAA), wedid screening to found positive clone and them was submitted to the process of shotgun,the data obtained was submitted a bioinformatics analyses. Our results showsthe hypothesis of high unexplored microbial diversity of soil are able to foundnovel genes and metagenomic approach is and allowed to isolate novel genes and insilico analyses are essential part to identify a novel Inorganicpyrophosphatase (PPase) prediction indicated the novel gene operate as H+ pumps. Thissuggests that a special feature, our work in situ will be cloning thegene expression vector for subsequent kinetic characterization and crystallization.

Caracterização gênica para uma anomalia de Eucalyptus em fase inicial de desenvolvimento

Pós-graduação em Ciências Biológicas (Genética) - IBB

Seleção fenotípica e identificação de snps em regiões genômicas ligados a resistência à ferrugem em Eucalyptus grandis

Pós-graduação em Agronomia (Proteção de Plantas) - FCA

Clones de Eucalyptus sp. submetidos a estresse hídrico em dois tipos de solo

Pós-graduação em Agronomia (Irrigação e Drenagem) - FCA

Inflection and stability points of diphasic logistic analysis of growth

Growth functions with inflection points following a diphasic model, can be adjusted by two approaches using segmented regression or the sum of two functions. In both cases, there are two functions, one for each phase, with inflection and stability points. However, when they are summed, the result is a new function and the points of inflection and stability are different from those obtained from using each function individually. A method to determine these points in a diphasic logistics sum of functions is suggested and the results obtained from fitting the models to eucalyptus growth data showed a better fit of the logistic diphasic sum as compared with segmented regression and monophasic logistic models.

Functional and phylogenetic diversity of scattered trees in an agricultural landscape: Implications for conservation

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Medium density particleboard reinforced with bamboo laminas

The objective of this work was to evaluate the effect of the addition of bamboo laminas of the species Dendrocalamus giganteus to three-layer medium density particleboard (MDP). These laminas were glued onto both the top and the bottom of each panel. With the manufactured panels laminated with bamboo, mechanical tests based on the Brazilian Standard ABNT NBR 14810 were carried out to determine the modulus of rupture (MOR) in static bending and the tensile strength parallel-to-surface. These mechanical tests were realized in particleboards of eucalyptus and in reinforced particleboard, both produced in the laboratory. The modulus of rupture and tensile strength parallel-to-surface of the laminated MDP had values close to those that have been reported. The reinforcements increased the values of these studied properties. Nevertheless, this fact indicated the possibility to produce a stronger MDP using bamboo lamina as surface layers. These results show the possibility of using coatedbamboo MDP for utilization in large spans, for example, in flooring for mezzanines with finish on both sides, and for robust furniture as bookshelves, beds, tables, etc.

Available nitrogen and responses to nitrogen fertilizer in brazilian eucalypt plantations on soils of contrasting texture

Eucalyptus plantations have seldom responded to N fertilization in tropical and subtropical regions of Brazil. This implies that rates of N mineralization have been adequate to supply tree needs. However, subsequent crop rotations with low N fertilization may result in declining concentrations of organic and potentially mineralizable N (N-0), and consequent loss of wood productivity. This study investigated (a) in situ N mineralization and N-0 in soils of eucalypt plantations in Sao Paulo state, Brazil; (b) tree growth responses to N fertilizer applied 6-18 months after planting; and (c) the relationships between N-0,N- other soil attributes and tree growth. We established eleven N fertilizer trials (maximum 240 kg ha(-1) of N) in E. grandis and E. grandis x urophylla plantations. The soil types at most sites were Oxisols and Quartzipsamments, with a range of organic matter (18 to 55 g kg(-1)) and clay contents (8% to 67%) in the 0-20 cm layer. Concentrations of N-0 were measured using anaerobic incubation on soil samples collected every three months (different seasons). The samples collected in spring and summer had N-0 140-400 kg ha(-1) (10%-19% total soil N), which were best correlated with soil texture and organic matter content. Rates of in situ net N mineralization (0-20 cm) ranged from 100 to 200 kg ha(-1) year(-1) and were not correlated with clay, total N, or N-0. These high N mineralization rates resulted in a low response to N fertilizer application during the early ages of stand growth, which were highest on sandy soils. At the end of the crop rotation, the response to N fertilizer was negligible and non-significant at all sites.

Genetic gain in the selection by multi-effects index in open-pollinated progenies of Eucalyptus grandis Hill ex Maiden

In Brazil, Eucalyptus grandis Hill ex Maiden is widely used for commercial reforestation, especially for production of pulp, paper and energy. Its genetic variability is being explored in tree improvement programs for over 30 years. The objective of this work was to estimate genetic parameters and compare genetic gains by multi-effects index in a breeding population of E. grandis. Progeny tests were established using open-pollinated seeds from ten provenances ranging from 153 to 160 progenies established in a completely randomized block design in four sites of Sao Paulo State (Anhembi, Avere Itarare e Pratania). At 24 months of age the traits diameter at breast height (DBH), height (ALT) and volume (VOL) were measured. The individual site analyses indicated significant genetic differences among progenies, height genetic variability and the mean progeny heritability (> 0.70). For joint analyses of sites, significant differences in genotype x environmental interaction effects were detected, showing differences of performance of the progenies in different sites. The Itarare site gave high genetic gains, effective size and genetic diversity. The genetic diversity and low effective size are unviable factors; considering that the progeny tests studied should retain adequate levels of genetic variability in order to be transformed in future seedling seed orchards.

Productivity, stability and adaptability in open pollination progenies of Eucalyptus urophylla ST Blake

Prediction of genetic gains within breeding programs is not always compatible with those observed in practice. One reason for this inconsistency is the lack of knowledge of genotype-environment interaction (GxE). The aim of this study was to estimate genetic variation, evaluate the GxE, investigate the genetic correlation between pairs of environments and for the set, and to study the productivity, stability and adaptability at 2 years of age for diameter at breast height (DBH) in five progenies trials of Eucalyptus urophylla, used in a randomized complete block design, with the number of progenies ranging from 138 to 167, four to eight blocks and five to six plants per plot. Estimates of variance components and genetic parameters were obtained using the REML/BLUP method. For analysis of productivity, stability and adaptability, the HMRPGV method was used. The highest DBH growth was observed in Anhembi (10.52 cm) and Uberaba (10.20 cm). Estimates considered high were obtained for the coefficient of individual additive genetic variation (>13.3%) and average heritability among progenies (>0.40), indicating the possibility of obtaining genetic gains by selection among progenies. The coefficient of determination of the GxE was 1.7%, a fact that led to a high value of genotypic correlation between the performance of the progenies and environments (78.1%), indicating that the interaction is simple. The first six progenies showed a coincidence of 100% in the order of stability (HMGV), adaptability (RPGV) and productivity (HMRPGV), being 13% higher than the overall mean of five experiments (9.21 cm). When ordering the progenies, the selection of the 20 best in growth led to an increase in gain ranging of from 10.4 to 70%. Anhembi is the ideal place to have a breeding population which will be good in the other places as well.