369 resultados para Evaluation of different sources of carbohydrates


Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Objectives. To compare three different designs for measuring the bond strength between Y-TZP ceramic and a composite material, before and after ceramic surface treatment, evaluating the influence of the size of the adhesive interface for each design.Methods. 'Macro'tensile, microtensile, 'macro'shear, microshear, 'macro'push-out, and micropush-out tests were carried out. Two Y-TZP surface treatments were evaluated: silanization (sil) and tribochemical silica coating (30 mu m silica-modified Al2O3 particles + silanization) (TBS). Failure mode analysis of tested samples was also performed. Results. Both the surface treatment and the size of the bonded interface significantly affected the results (p = 0.00). Regardless of the type of surface treatment, the microtensile and microshear tests had higher values than their equivalent "macro" tests. However, the push-out test showed the highest values for the "macro" test. The tensile tests showed the greatest variability in results. The tribochemical silica coating method significantly increased bond strength for all tests.Significance. Different test designs can change the outcome for Y-TZP/cement interfaces, in terms of mean values and reliability (variability). The 'micro'tests expressed higher bond strengths than their equivalent 'macro'tests, with the exception of the push-out test (macro > micro). (C) 2015 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Glucose biosensors based on lyophilised, crystalline and cross-linked glucose oxidase (GOx, CLEC(R)) and commercially available lyophilised GOx immobilised on top of glassy carbon electrodes modified with electrodeposited Prussian Blue are critically compared. Two procedures were carried out for preparing the biosensors: (1) deposition of one layer of adsorbed GOx dissolved in an aqueous solution followed by deposition of two layers of low molecular weight Nafion(R) dissolved in 90% ethanol, and (2) deposition of two layers of a mixture of GOx with Nafion dissolved in 90% ethanol. The performance of the biosensors was evaluated in terms of linear response range for hydrogen peroxide and glucose, detection limit, and susceptibility to some common interfering species (ascorbic acid, acetaminophen and uric acid). The operational stability of the biosensors was evaluated by applying a steady potential of -50 mV versus Ag/AgCl to the glucose biosensor and injecting standard solutions of hydrogen peroxide and glucose (50 muM and 1.0 mM, respectively, in phosphate buffer) for at least 5 h in a flow-injection system. Scanning electron microscopy was used for visualisation of the Prussian Blue redox catalyst and in the presence of the different GOx preparations on the electrode surface. (C) 2001 Elsevier B.V. B.V. All rights reserved.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The calcium-intake relationship with other alimentary and anthropometric variables was investigates in a group of 60 adult (19-75 year-old) subjects, 50 females and 10 males, with essential arterial hypertension (DAP > 90 mmHg). The calcium intake was assessed by three different protocols: 24-hour food intake recall, food-frequency questionnaire and 3 day self-food intake register, repeated along with anthropometric measurements on three different occasions (2-15 month-intervals). The calcium intake assessed by the three methods, as well as the anthropometric data, were statistically similar on all three occasions. The mean data were then compared with those form the control, composed of 75 healthy subjects matched with the hypertensive group by age and sex. The patients ingested less calcium (mean +/- SD) than the controls on the daily (517 +/- 271 x 740 +/- 353 mg/d) and body-weight (8.1 +/- 5.0 x 11.4 +/- 5.9 mg/kg/d) basis. Among the males the calcium intake was the only difference found between groups and could be attributed to the lower intake of calcium-rich foods. The hypertensive females showed also higher lean-body mass (Body-mass index and arm muscle circumference). Thus the calcium intake discriminated both groups being associated with changes in other nutritional parameters only in females.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Nasal obstruction (NO) is a common symptom present in 25% of the general population, which significantly interferes with the quality of life. The different facial profiles and malocclusion patterns could be associated with the degree of NO. In order to evaluate the nasal function in patients with different facial morphology patterns, the authors developed a prospective study in which 88 patients from a dentofacial deformities center were included. These patients were submitted to fibrorhinoscopy (Mashida, ENT PIII) with a 3.2-mm cannula under topical anesthesia to evaluate septal deviation, inferior and medium turbinates, and pharyngeal tonsils. The 88 patients included in the study were divided into 3 groups according to the classification of the facial profile, distributed as follows: 32 class I, 28 class II, and 28 class III; the data collected was statistically analyzed by analysis of variance and the results are shown. The patients included in this study presented similar prevalence of NO with the reduction of airway function efficiency. Although it was not a statistically different, the group II presented higher mean Nasal Obstruction Syndrome Evaluation scores.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The purpose of this study is to make a 3-dimensional (3-D) evaluation of the pharyngeal airway space (PAS) in patients with class I, II, and III malocclusion. Sixty patients were evaluated. The patients were divided in 3 groups according to their occlusion classification. The volume and area of PAS were evaluated using the software Dolphin 3-D Imaging in the preoperative period for orthognathic surgery. PAS volume and area were influenced by different patterns of malocclusion. The mean volume and area for class III patients were statistically bigger than for classes I and II patients (P < .001). There was also a significant difference for volume values between class I and II patients, being the bigger volume for the class I patients (P < .05). It was possible to conclude that the class III patients presented a bigger PAS compared with classes I and II patients.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Brazil is one of the largest agricultural producers in the world. However, its agrarian composition is based on two markedly different production models, particularly in relation to sustainability: a peasant family agriculture, which plays an important role in food production for domestic consumption and advocates agro-ecological practises; and agribusiness, the politically and economically hegemonic model that produces commodities for export based on monoculture and intensive use of pesticides. Therefore, in order to create the means to develop peasant lands, social movements and peasants have engaged themselves politically and defended an education model grounded in sustainable practises of production and social organisation. Taking this into account, the main purpose of this paper is to analyse and assess the Brazilian experience of integration between education and sustainability, in the National Education Program in Agrarian Reform (PRONERA). To accomplish this aim, a survey with a semi-structured questionnaire was carried out among teachers, students, monitors, and coordinators of the course offered by PRONERA. The surveys showed that the courses are promoting the concepts of sustainability among peasants. However, many adjustments need to be taken into consideration during the planning process for the next courses offered by PRONERA.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Objective: The use of Er:YAG laser operating in the 3 μm range with adjustable power and pulses has become popular for dental and medical practice due to its high photoablative capacity, surgical precision and antimicrobial action. Background data: The existing fiberoptic tips irradiate lasers parallel to the long axes of the tooth limiting its efficiency in the root canal. Methods: We evaluated hollow fiberoptic tips obtained from silicate glass as a means of Er:YAG laser conduction in dental procedures. The fiber tips were molded from capillary tubes with different profiles so that their ends would have cylindric, conical or spherical shapes. The performance of the three fibers as a means of propagation of Er:YAG (λ = 2.94 μm) laser radiation was compared to that of a solid sapphire fiber at 10 Hz and 200 mJ and of 20 Hz and 500 mJ. The profiles of frontal and lateral burning were visualized on thermal paper. Results: Analysis of these profiles demonstrated that the sapphire tip and the hollow fiber of cylindric section did not differ significantly in the profiles of frontal burning, and no lateral burning was detected. The fibers of the conical and spherical sections, although presenting attenuation in the frontal output power, showed a larger burning area in the frontal profile, in addition to producing lateral burning. Conclusions: The results indicate that commercial hollow fiberoptics have advantages such as easy manufacture of the different tip shapes, great adaptability, low cost, and a low loss of transmission. © Mary Ann Liebert, Inc.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The purpose of this study was to evaluate, in vitro, the chromatic behavior of esthetic brackets stored in potentially staining solutions. The sample were divided into four groups according to the commercial brand and stored in four different solutions (distilled water, cola soda, coffee and mouthrinse) at 37°C for 14 days. Possible color changes measured according to the CIE L*a*b* color system with a spectrophotometer at five intervals of time after storage. The statistical analysis was carried out using ANOVA to 1%, Tukey's tests and decomposition of interactions with a significance level of 5%.The color changes were dependent on the solution, storage time and the brand of brackets. The largest color changes were observed in the G3, followed by G2, G1/G4. The esthetic brackets do not present satisfactory and stable chromatic behavior.