Tratamento da superfície do alumínio via eletrólise a plasma

This paper presents the study on the application of the electrolytic plasma for surface treatment of aluminum. A bibliographical study on the material of interest was preliminarily performed and later designed and built an electrolytic cell, including the excitation source. Unlike conventional electrolysis process, the plasma assisted carry on in the non-linear region of characteristic current/voltage curve. Therefore it requires for the on set of the process that the power supply operates on harder conditions than those on high current process. The plasma produced during the present investigation has temperatures in the range o 6,0.10 3 -7,0 .10 3 K, well above those found in conventional chemical process. It also shows a particular dynamic to promote changes on surface and to produce new materials. The plasma is generated by microdischarge in vapor or gas bubbles involved in physic-chemical processes in electrode regions of the electrolytic cell. The electrode material was the aluminum (7075). The Process Electrolytic Plasma Processing (EPP) is sensitive to various parameters such as operating voltage, current density, electrolyte, concentration of electrolyte, geometry of reactor, temperature of electrolytic solution and dynamic of the fluid in the cell. The experiments were carried on in order to find parameters for a stable abd steady operation. The choice for the electrolytic was silicate/alkali solution in various concentrations to operate in various voltage as well. Plasma was produced on negative (cathode) and positive (anode) electrode, in specific conditions. A stable operation on the cathode process was obtained with low concentration of the electrolytic in aqueous solution, current density around 250V effective voltage. For the evolution of plasma in anodic process it was required higher concentrations and higher... (Complete abstract click electronic access below)

Obtenção e caracterização de compósitos via RTM com alta fração de fibras de carbono processados à temperatura ambiente

After confirming the high specific mechanical properties of composite materials by scientific studies conducted over the last decades, one of the challenges of this new class of materials is the ability to achieve mass production at a more affordable cost, which has become indispensable. The Resin Transfer Molding (RTM) is an excellent method for manufacturing composite materials. Despite being a process widely used by international companies in the production of high performance structural composites, only a short time the national aviation industry has shown interest in implementing this type of processing to more complex structures and greater structural responsibility. In aeronautical projects, the reproducibility and the relative low cost of this process, several studies have been performed in Brazil for learning and perfecting this technique. This process is suitable for producing polymer components both simple as complex geometry, and allows to achieve consistent thickness, with high quality finish and without limiting range. Polymeric composite components for the high mechanical stress applications such as aircraft structures, satellites, etc., require a strict control of volume fractions of the composite constituents, beyond the knowledge of their mechanical and thermal properties. Therefore, in this experimental work degree study on the mechanical, thermal and of porosity composites processed by RTM processed characterization was performed. This characterization was performed targeting a possible aerospace application of this composite material. For the production of composites, process equipment (RTM RTM injector Radius 2100cc) was used. The processed carbono/epoxy composites were characterized via flexure tests mechanically and thermally analysis via DMA, DSC and TGA. To determine the volume fraction of fibers, the composite samples were analyzed via matrix digestion (ASTM D3171) ... (Complete abstract click electronic access below)

Revisão teórico bibliográfica sobre o espraiamento da nasalidade no português do Brasil com especial destaque para o dialeto paulista

O espraiamento da nasalização é um fenômeno observado desde estudos antigos sobre a língua portuguesa. Tanto com as consoantes nasais em posição de coda, quanto com elas em posição de onset, nota-se a interferência gerada nas vogais que as acompanham. O atual estudo aborda como eram percebidas e estudadas as nasais e seu espraiamento, demonstrando como a nasalização pode ser descrita, por seus segmentos fonéticos – demonstrando quais elementos a compõem – e por suas marcas suprassegmentais. Detalha-se também a importância de estudos realizados sobre a nasalidade dentro da geometria de traços. Faz-se levantamento geral do fenômeno do espraiamento da nasalidade, através de estudos gerais da nasalidade e da teoria fonética e fonológica relativa ao fenômeno

Corpos intrusivos básicos na coluna sedimentar Permo-Carbonífera no vale do rio Corumbataí

As rochas intrusivas básicas associadas a Formação Serra Geral na porção sul do município de Rio Claro e norte de Piracicaba configuram geometrias na forma de diques e soleiras. Estes corpos estão associados à uma parte da Bacia Sedimentar do Paraná que foi deformada por eventos tectônico que resultaram em trends preferencias NW-SE, condicionando a estratigrafia, a intrusão e geometria dos corpos de diabásio e formação da estrutura domática do alto de Pitanga. Os corpos intrusivos tem em sua maioria a forma de soleiras e em menor quantidade a forma de diques. A compreensão destes corpos é importante para o entendimento da estratigrafia da área conhecida como domo de Pitanga na região de Rio e Piracicaba

Contagem automatizada de veículos utilizando segmentação estatística

In this work was developed a program capable of performing automatic counting of vehicles on roads. The problem of counting vehicles is using expensive techniques for its realization, techniques which often involve manual counting or degradation of the pavement. The main motivation for this work was the importance that the vehicle counting represents to the Traffic Engineer, being essential to analyze the performance of the roads, allowing to measure the need for installation of traffic lights, roundabouts, access ways, among other means capable of ensuring a continuous flow and safe for vehicles. The main objective of this work was to apply a statistical segmentation technique recently developed, based on a nonparametric linear regression model, to solve the segmentation problem of the program counter. The development program was based on the creation of three major modules, one for the segmentation, another for the tracking and another for the recognition. For the development of the segmentation module, it was applied a statistical technique combined with the segmentation by background difference, in order to optimize the process. The tracking module was developed based on the use of Kalman filters and application of simple concepts of analytical geometry. To develop the recognition module, it was used Fourier descriptors and a neural network multilayer perceptron, trained by backpropagation. Besides the development of the modules, it was also developed a control logic capable of performing the interconnection among the modules, mainly based on a data structure called state. The analysis of the results was applied to the program counter and its component modules, and the individual analysis served as a means to establish the par ameter values of techniques used. The find result was positive, since the statistical segmentation technique proved to be very useful and the developed program was able to count the vehicles belonging to the three goal..

Evolução tectônica do Trend Badejo-Linguado-Pampo, bacia de Campos (RJ)

The regional geological work for the oil industry, in order to find potential areas for hydrocarbon exploration and understand the geological parameters responsible for the formation of the deposit are known importance. This work fits into that scenario, with regional research with the aid of wells and 2D and 3D seismic sold by DBEP (Database Exploration and Production). Were also used as GeoGraphix software package Landmarks modules Prizm and SeisWork 2D and 3D, and the Surfer 8 and ArcGIS 9.2 with the infrastructure provided by the 05 PRH - ANP with LSGI (Laboratory of Seismic and Geological Interpretation) located at UNESP -- Campus de Rio Claro. The work focuses on study the trend of oil-Badejo-Linguado-Pampo, producing fields since the beginning of offshore holdings. The Campos Basin is now known as the offshore basin of the country more productive, and the high structural Badejo is a structure of great importance in the basin presents itself as largely responsible for the conditioning of hydrocarbon fields Pampo, Linguado and Badejo. Therefore this work also aims to increase knowledge of the region in terms of tectonic and stratigraphic characterize the geometry of the structures associated with this major regional structure. For this we used structural contour maps of the main chrono-horizons, and Isopach maps for the purpose of better understanding the tectono-sedimentary evolution of the Campos Basin locally.

Concentração de tensões em peças e componentes estruturais - uma abordagem através do método dos elementos finitos

Any failure process that may occur in a part probably is located where the stress exceeded the level of resistance. When a part or component has a sharp change in geometry, such as slots, holes, grooves, bumps or other irregularities, there is an increased concentration of stress at a specific location of the part. The objective of this study is to determine the maximum stresses in structural parts and components using the equations of elasticity theory in conjunction with the stress concentration factor experiment and compare them with results obtained by finite element method

Previsão do comportamento de estruturas de contenção atirantadas utilizando o software FTOOL

Population growth, together with the gradual social ascent in Brazil, reflects at the growing need for better use of urban spaces. In this context, the amount of new buildings to meet the demand in property market, the needs for creating new roads and highways, among others, make the use of geotechnical works and, more specifically, retaining walls, more and more common. One of the simplest solutions for underground works is the use of retaining structures using tie back walls for soil support, therefore, the present work deals with this kind of structures. This paper proposes the use of FTOOL software testing in predicting deformations in tie back walls, by comparing simulations of the presented model to a real and measured deformation case in Guabirotuba Formation (PR). The results showed the importance of defining the parameters such as stiffness and curtain geometry, as well as the definition of representative loads acting on it. Also, it was pointed out that the passive response of the steel rods depends on the horizontal displacement of the wall. The study concluded that the program generates very representative results when compared to field data and seems to be a promising tool for tie back structures displacement predictions

Análise quantitativa dos parâmetros físicos e radiométricos de procedimetnos radioterapicos em tumores de mama

The paper presents the radiometric parameters determined by the medical physicist during routine radiotherapy planning service in cases of breast cancer . The contours of the breast volume in patients undergoing radiation breast tumors at the Hospital das Clinicas, Faculty of Medicine , UNESP, Botucatu ( HCFMB ) during the year 2012 were analyzed . In order to analyze the influence of physical and radiometric parameters for the determination of the dose distribution of irradiated breast volume , four measurements of isodose curves were prepared in four different heights breast , and compared with the isodose curves plotted computationally . In the routine of planning , the medical physicist must determine the isodose curve that gives the best dose distribution homogeneity in the irradiated volume . The choice of the treatment plan can be done by dedicated computer systems , which require significantly costly investments available services having better financial support . In the Service of Medical Physics , Department of Radiotherapy , HC FMB , we use a two-dimensional software for determination of isodose curves , however , this software is out of date and frequently becomes inoperable due to the lack of maintenance and it is a closed system without feasibility of interference from computer professionals . This fact requires manual preparation of isodose curves , which are subject to uncertainties due to the subjectivity in the clinical interpretation of medical radiation oncologist and medical physicist responsible for planning , plus dispendiar significant calculation time . The choice of the optimal isodose curve depends on the energy of the radiation beam , the geometry and dimensions of the irradiated area . The contours of the breast studied in this work evaluations showed that , for a given energy input , such as the energy of 1.25 MeV of gamma radiation Unit Telecobaltoterapia , the determination of the percentage depth dose ( PDP ) ...

Análise dosimétrica de aplicadores de Betaterapia

Betatherapy is a special medical technique using a radioactive source of strontium-90 for the treatment of superficial lesions, especially in dermatology and ophthalmology. Strontium-90 sources emit β radiation, which possesses high ionization power, but a very short distance propagation into matter. This work presents a method of dosimetric analysis of betatherapy using strontium- 90-based instrumentation, commonly used against superficial diseases, such as keloid and pterygium, aiming the description of the dosimetry analysis procedures, which can be easily implemented on tradiotherapy services that offers the betatherapy treatment. IBF-MEDIX radiographic films (conventional films) were exposed to betatherapy applicators during different time intervals according to the activity of the source, and afterwards the optical densities (O. D.) of the radiographic images were measured using an optical densitometer MACBETH. Therefore, the parameters used to make the dosimetric analysis in betatherapy were standardized, as the exposure time depended on the geometry and size of the source, providing an efficient and fast method of dosimetric analysis of the betatherapy equipment of the services, the majority of which do not have the scientific structure to perform this study

Alimentar ou ser alimentado?: a expansão da agroindústria canavieira e a soberania alimentar em Flórida Paulista/SP

Devido às características de uso e ocupação do território nas últimas duas décadas, marcadas pela substituição da heterogeneidade da paisagem camponesa pela monotonia dos mares verdes do agronegócio, o município de Flórida Paulista contempla elementos representativos para analisarmos algumas das resultantes entre a expansão da cana-de-açúcar e a produção de alimentos voltados ao abastecimento dos locais próximos. Com isso buscamos entender, com base no recorte eleito para estudo, o percurso do alimento no espaço, desde as pequenas propriedades camponesas que ainda resistem à imposição do formato único, até os diversos pontos de venda/aquisição de alimentos disponíveis na área urbana, além do CEASA de Presidente Prudente/SP, responsável pela distribuição da maior parte dos produtos alimentícios encontrados nas bancas do município. A expansão das áreas monocultoras encontra-se sintonizada aos imperativos da lógica do abastecimento alimentar referenciado no movimento do alimento no espaço, no qual áreas antes policultoras, produtoras de alimentos, são sobrepostas pela geometria monocultural dos canaviais, o que diminui as possibilidades de abastecimento local e reforça o discurso de que os alimentos devam ser garantidos a partir de sujeitos estranhos ao lugar. Alimentar ou ser alimentado, soberania ou segurança, poder de decisão que emana autonomia ou dependência, constituem o eixo central no debate aqui proposto, de modo a identificar, a partir do movimento que denuncia a lógica por detrás do alimento, atores e setores entre a terra e o alimento. Com o objetivo de compreender as implicações do modus operandi próprio ao agronegócio... (Resumo completo, clicar acesso eletrônico abaixo)

Investigação sobre deformação neotectônica no lineamento Guapiara, região de Guapiara e Jacupiranga

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Dinâmica populacional de Zaprionus indianus Gupta 1970 (Diptera: Drosophilidae) e caracterização de alguns aspectos biológicos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Patch size, shape and edge distance influences seed predation in a keystone palm in tropical rainforests

Pós-graduação em Ciências Biológicas (Zoologia) - IBRC

Sobre o teorema de fibração de Milnor

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)