Estabilidade de agregados de um latossolo vermelho degradado em recuperação com adubos verdes, calcário e gesso

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Revegetation on a Removed Topsoil: Effect on Aggregate Stability

The construction of a large reservoir on the Parana River (Selviria, MS, Brazil) disturbed the soil of an extensive agricultural area in which between 5 and 8m of topsoil were removed. In this area, a restoration process was carried out using revegetation with green manure without or with amendments (for 4 years), crops (2 years), and Brachiaria decumbens cultivation for 6 years. The following treatments were used: control plots, T0 (residual subsoil) and T1 (soil tillage without culture); plots with green manure and without amendments: T2 (velvet bean) and T3 (pigeon pea); plots with green manure and with amendments: T4 (limed + velvet bean), T5 (limed + pigeon pea); T6 (limed + gypsum + velvet bean) and T7 (limed + gypsum + pigeon-pea). They were arranged in randomized blocks. After 13 years of rehabilitation process, when the soil was cultivated with brachiaria, the structural stability in three depths was evaluated. Organic-matter content and others chemical properties did not show any relationship with the stability of aggregates of the experimental area as measured by mean weight diameter (MWD). Significant differences between depths were found for MWD and the other parameters measured. Nevertheless, there were no significant differences observed between treatments, independent of the adopted system of revegetation. By taking an absolute value of MWD, the stability of superficial layer was observed in the following sequence: T7 T5 T6 T1 T2 T3 T4 T0. The control plot (T0) gave the lowest value of MWD (1.76mm) in relation to the plots in restoration process. Treatment T7 was the most effective in recovering the stability of aggregates (2.63mm). However, treatments T5 and T6 displayed a similar value. After 13 years of revegetation practices, a slight recovery of the stability was observed, although this is still lower than stability in soils of similar edaphic conditions in the original topsoil of experimental area.

Oral cavity evaluation and dental chart registration of coati (Nasua nasua) in captivity

The aims of this study were to develop a dental chart evaluate any oral cavity disease, develop gypsum models the dental arches, and to register the occlusions found in coatis (Nasua nasua) in captivity. Formulation of the dental chart was assisted by intraoral radiographs from the head of an adult coati cadaver of the same species with the following dental formula: I 3/3, C 1/1, P 4/3, M 2/2. Seven live coatis of the Nasua nasua species were evaluated. Five of the seven coatis presented with various dental abnormalities as follows: dental plaque (71.4 %), gingivitis (71.4 %), periodontitis (57.1 %), dental stain (42.9 %), dental abrasion (57.1 %), dental fracture (57.1 %), pulp exposure (42.9 %), malocclusion (5 7.1 %) and supernumerary teeth (14.2 %).

Effect of Flasking and Polymerization Techniques on Tooth Movement in Complete Denture Processing

Purpose: The purpose of this study was to compare the artificial tooth positional changes following the flasking and polymerization of complete dentures by a combination of two flasking methods and two polymerization techniques using computer graphic measurements.Materials and Methods: Four groups of waxed complete dentures (n = 10) were invested and polymerized using the following techniques: (1) adding a second investment layer of gypsum and conventional water bath polymerization (Control), (2) adding a second investment layer of gypsum and polymerization with microwave energy (Gyp-micro), (3) adding a second investment layer of silicone (Zetalabor) and conventional polymerization (Silwater), and (4) adding a second investment layer of silicone and polymerization with microwave energy (Silmicro). For each specimen, six segments of interdental distances (A to F) were measured to determine the artificial tooth positions in the waxed and polymerized stages using software program AutoCad R14. The mean values of the changes were statistically compared by univariate ANOVA with Tukey post-hoc test at 5% significance.Results: There were no significant differences among the four groups, except for segment D of the Silmicro group (-0.004 +/- 0.032 cm) in relation to the Gypwater group (0.044 +/- 0.031 cm) (p < 0.05), which presented, repectively, expansion and shrinkage after polymerization.Conclusions: Within the limitations of this study, it was concluded that although the differences were not statistically significant, the use of a silicone investment layer when flasking complete dentures resulted in the least positional changes of the artificial teeth regardless of the polymerization technique.

Influence of Different Base Thicknesses on Maxillary Complete Denture Processing: Linear and Angular Graphic Analysis on the Movement of Artificial Teeth

Objective: The purpose of this study was to compare the dental movement that occurs during the processing of maxillary complete dentures with 3 different base thicknesses, using 2 investment methods, and microwave polymerization.Methods: A sample of 42 denture models was randomly divided into 6 groups (n = 7), with base thicknesses of 1.25, 2.50, and 3.75 mm and gypsum or silicone flask investment. Points were demarcated on the distal surface of the second molars and on the back of the gypsum cast at the alveolar ridge level to allow linear and angular measurement using AutoCAD software. The data were subjected to analysis of variance with double factor, Tukey test and Fisher (post hoc).Results: Angular analysis of the varying methods and their interactions generated a statistical difference (P = 0.023) when the magnitudes of molar inclination were compared. Tooth movement was greater for thin-based prostheses, 1.25 mm (-0.234), versus thick 3.75 mm (0.2395), with antagonistic behavior. Prosthesis investment with silicone (0.053) showed greater vertical change compared with the gypsum investment (0.032). There was a difference between the point of analysis, demonstrating that the changes were not symmetric.Conclusions: All groups evaluated showed change in the position of artificial teeth after processing. The complete denture with a thin base (1.25 mm) and silicone investment showed the worst results, whereas intermediate thickness (2.50 mm) was demonstrated to be ideal for the denture base.

Flexural Strength of Glass-Infiltrated Zirconia/Alumina-Based Ceramics and Feldspathic Veneering Porcelains

Purpose: To compare the flexural strength of two glass-infiltrated high-strength ceramics and two veneering glass-ceramics.Materials and Methods: Four ceramic materials were tested: two glass-infiltrated high-strength ceramics used as framework in metal-free restorations [In-Ceram Zirconia IZ (Gr1) and In-Ceram Alumina IA (Gr2)], and two glass-ceramics used as veneering material in metal-free restorations [Vita VM7 (Gr3) and Vitadur-alpha (Gr4)]. Bar specimens (25 x 5 x 2 mm(3)) made from core ceramics, alumina, and zirconia/alumina composites were prepared and applied to a silicone mold, which rested on a base from a gypsum die material. The IZ and IA specimens were partially sintered in an In-Ceram furnace according to the firing cycle of each material, and then were infiltrated with a low-viscosity glass to yield bar specimens of high density and strength. The Vita VM7 and Vitadur-alpha specimens were made from veneering materials, by vibration of slurry porcelain powder and condensation into a two-part brass Teflon matrix (25 x 5 x 2 mm(3)). Excess water was removed with absorbent paper. The veneering ceramic specimens were then removed from the matrix and were fired as recommended by the manufacturer. Another ceramic application and sintering were performed to compensate the contraction of the feldspar ceramic. The bar specimens were then tested in a three-point bending test.Results: The core materials (Gr1: 436.1 +/- 54.8; Gr2: 419.4 +/- 83.8) presented significantly higher flexural strength (MPa) than the veneer ceramics (Gr3: 63.5 +/- 9.9; Gr4: 57.8 +/- 12.7).Conclusion: In-Ceram Alumina and Zirconia were similar statistically and more resistant than VM7 and Vitadur-alpha.

Efeito de condicionadores químicos sobre a qualidade da cama de frango

Avaliou-se a qualidade química da cama de frango submetida, por três lotes consecutivos de criação, a diferentes condicionadores químicos. Foram utilizadas 1320 aves, 440 por lote, em delineamento experimental em blocos ao acaso, com cinco tratamentos (Trat. 1 - cama sem tratamento; Trat. 2 - cama tratada com sulfato de alumínio; Trat. 3 - cama tratada com gesso agrícola; Trat. 4 - cama tratada com superfosfato simples e Trat. 5 - cama tratada com cal hidratada) e quatro repetições. As amostras de cama foram coletadas no 42º dia de utilização. Não houve influência dos condicionadores (P>0,05) sobre a matéria seca. O sulfato de alumínio reduziu (P<0,002) o valor de pH (7,42; 7,07 e 6,00, respectivamente no primeiro, segundo e terceiro lotes) e reduziu (P<0,05) a quantidade de amônia volatilizada (3,14; 1,36 e 1,79mg/100g, respectivamente no primeiro, segundo e terceiro lotes), quando comparado aos outros tratamentos. Concluiu-se que o sulfato de alumínio pode ser adicionado à cama de frango para manter o pH baixo e inibir a volatilização da amônia.

Efeito de condicionadores químicos na cama de frango sobre o desempenho de frangos de corte

Estudou-se o efeito de condicionadores químicos na cama de frango sobre o desempenho de frangos de corte criados em três lotes consecutivos. Foram utilizadas 1320 aves, 440 em cada lote, em delineamento experimental em blocos ao acaso, com cinco tratamentos (Trat. 1 - cama sem tratamento; Trat. 2 - cama tratada com sulfato de alumínio; Trat. 3 - cama tratada com gesso agrícola; Trat. 4 - cama tratada com superfosfato simples e Trat. 5 - cama tratada com cal hidratada) e quatro repetições. As aves e as rações foram pesadas no início e no final do período experimental para obtenção do peso final, do consumo de ração, da conversão alimentar e da viabilidade. O uso dos condicionadores não influenciou (P>0,05) o peso final, o consumo de ração e a conversão alimentar. A adição do sulfato de alumínio e do superfosfato simples reduziu (P<0,05) a viabilidade das aves. Não é necessário o uso dos condicionadores na cama de frango reutilizada até o terceiro lote.

Híbridos de amoreira adubados com matéria orgânica e gesso agrícola na produção de bicho-da-seda

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Qualidade física de um Latossolo Vermelho em recuperação há dezessete anos

The bulk density and resistance to penetration as indicators of recovery were studied with the objective to investigate the physical quality of a Red Latosol (Oxisol) under restoration for 17 years using green manures, soil correction, gypsum and pasture. The experimental design was a completely randomized with nine treatments and four replications. The treatments were: control (tilled soil without crop); Stizolobium aterrium; Cajanus cajan until 1994 and then substituted by Canavalia ensiformis; lime+S. aterrimum; lime+C. cajan until 1994 and then substituted by C. ensiformis; lime+gypsum+S. aterrimum; lime+ gypsum+C. cajan until 1994 and then substituted by C. ensiformis, the treatments were installed in 1992 and remained for seven years, in 1999 Brachiaria decumbens was planted; two other controls (native vegetation and exposed soil) were also used to compare. Bulk density, resistance to penetration and soil moisture were evaluated. The results were analyzed performing analysis of variance and Tukey test at probability of 5% to compare means. The treatments of reclamation are improving the physical qualities of soil and the results of treatment with C. cajan/C. ensiformis, lime and gypsum attained physical conditioning similar to soil under natural conditions.

Characterization, feasibility and optimization of Agaricus subrufescens growth based on chemical elements on casing layer

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Uso de resíduos agroindustriais nas produções de cana-de-açúcar, açúcar e álcool

In order to study the effect of gypsum, lime and the mixture of lime-gypsum, associated with syrup in the agricultural and industrial production and in the rooting of sugar-cane (Saccharum spp.), var. IAC 58-480, one experiment was carried out in soil Terra Roxa Estrutura. Sugar-cane was planted in November 1986, and the cane-plant harvesting in September 1988. Three successive harvests were collected.The experiment was set in a randomized block design with seven treatments and four replications .The treatments were: T1 - 1.2 ton/ha of lime; T2 - 0.8 ton/ha of lime + 0.4 ton/ha of gypsum; T3 - 0.6 ton/ha of lime + 0.6 ton/ha of gypsum; T4 - 0.4 ton/ha of lime + 0.8 ton/ha of gypsum; T5 - 1.2 ton/ha of gypsum; T6 - 2.4 ton/ha of gypsum; T7 - control. Syrup was applied at the amount of 45 m3/ha.In September 1990, after the third harvesting, the second application of the treatments was made, the gypsum being applied in amounts four times greater than those of that put into practice at the planting. During harvest, the following parameters were evaluated: number, length and average diameter of the stalks; yield; and probable sugar and theoretical alcohol production per hectare.The results showed that the second application of the treatments recuperated the crop. Greater yields were achieved when the gypsum was associated with lime or syrup.

Holocene paleoclimatic reconstruction based on the Lagoa Dourada deposits, southern Brazil

The Lagoa Dourada is a circular-shaped pond formed on the Furnas Formation (Devonian of the Paraná Basin), filled by late Pleistocene - Holocene sediments. It lies in the hydrographic basin of the Guabiroba River, a tributary of the Tibagi River situated in the Campos Gerais region of the State of Paraná, southern Brazil. The pond is about 200 m in diameter and the maximum water depth is 5.4 m. Geological, chemical, textural and mineralogical studies on a core sample of the sediments collected from the Lagoa Dourada, 12.2 m thick, was obtained for investigations of paleoenvironmental changes as well as to provide additional data to support previous reconstructions based on palynomorphs and diatoms. Within the period recorded in the core, the pond has been filled by sandy material introduced by springs at the northern edge of the pond as well as by muddy material brought in by floodwaters of the Guabiroba River. Thus, the sandy layers could be interpreted as evidence of drier climates with consequent diminution of fluvial overflow, but with maintenance of the sandy deposits coming from springs. The occurrence of euhedral pyrite in the sediments, locally associated with gypsum, may indicate periods of increase in the organic matter content or an increase in the water salinity, what could be related to greater evaporation under drier paleoclimate regimes. Three cycles defined by an increase in the total carbon content of the sediments of the pond were observed. These cycles seem to correspond to an increase in the isotope ratio 13C/12C (δ13C). Several hypotheses can be suggested to explain the presence of these cycles, including the alternation of wetter or drier climatic phases. The convergence of the sedimentological data obtained during this study with previous microfossil paleoclimatic (pollens and diatoms) indicators and radiocarbon dating suggests that a drier paleoclimatic phase occurred around 8720±150 years B.P. The evidence for a second drier phase in more recent times is less consistent. This subsequent phase could correspond to the drier phase in southern and southeastern Brazil between 5000 and 3000 years B.P. as suggested by other paleoclimatic studies.

Ciclos e seqüências deposicionais das formações Rio da Batateira e Santana (Andar Alagoas), Bacia do Araripe, Brasil

The Rio da Batateira e Santana formations, the latter with Crato, Ipubi and Romualdo members (Alagoas Stage, Aptian), were studied in four cored and logged wells from the eastern portion of Araripe Basin, Northeastern Brazil. The investigated section is 230 m-thick, and PS-14 well is the most representative, because it is the only one which sampled the evaporites of Ipubi Member. Nine facies cycles were identified, being formed by siliciclastics (estuarine, deltaic and lacustrine), mixed lithologies (lacustrine), carbonates, black shales and marls (lacustrine), and gypsum-anhydrite (lacustrine evaporite). The ordering of facies cycles furnished six depositional sequences. They were formed by siliciclastic, regressive-transgressive R-T cycles (S1 and S4, corresponding to Rio da Batateira Formation and to Santana Formation/Romualdo Member), by siliciclastics and carbonates, R-T cycles (S2, S3.1 and S3.2, corresponding to Crato Member), and by siliciclastic-carbonate, R-T cycles followed by evaporitic cycles (S3.3, referred to Ipubi Member). The last cycles correspond to concentration-dilution, C-D cycles of marine brines, which precipitated gypsum in the restricted lacustrine basin.

Correção da sodicidade de dois solos irrigados em resposta à aplicação de gesso agrícola

The chemical and physical degradation of the soils by salinity and sodicity problems constitutes a serious obstacle in productive irrigated areas in arid and semi-add regions. In order to eval mate the effect of gypsum on electrical conductivity, pH, exchangeable sodium percentage, sodium, calcium and magnesium content in saturation extract and exchangeable sodium of two saline-sodic soils: one from irrigated Perimeter Engenheiro Arco Verde in the municipality of Condado and another from irrigated Perimeter of São Gonçalo, in the municipality of Sousa both in the Paraiba State Brazil, an experiment was carried out in green house of the Departamento de Solos e Engenharia Rural, Centro de Ciências Agrárias, Universidade Federal da Paraíba, Areia, Brazil, in a factorial design 2 × 5 referring the two soils and five gypsum levels equivalent to 0; 3.2; 6.3; 9.4 and 12.5 g kg-1 to each soil. The gypsum application exercised positive effects on reduction of salinity and sodicity. The values of electrical conductivity, exchangeable sodium percentage, pH and contents of soluble and exchangeable sodium in relation to data of the soils before application of treatments with gypsum in both the soils were found to decrease.