Processamento auditivo (central) em escolares das séries iniciais de alfabetização

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito do laser Nd:Yag no pré-tratamento dentinário e selamento marginal, em restaurações de cimento de ionômero de vidro resina modificado

Pós-graduação em Odontologia Restauradora - ICT

Aquecimento e Desaquecimento Vocal em Estudantes de Pedagogia

Introduction: the voice is one of the main features of interaction between teacher and student. As teachers, future teachers are also risk population for the development of dysphonia and may be subject to protective intervention. Purpose: to evaluate the effect of a vocal warm-up and cool-down procedure at Pedagogy students. Method: A quasi-experimental study, pre-posttest without a control group, with fourteen Pedagogy students at a public university, participants of a short course. The analysis was performed by a self-assessment visual analogue scale of 10 cm, considering aspects related to the body and voice. The protocol was implemented in three steps: pre-test, post warm-up and post cool-down, and it was calculated the averages of the variables of discomfort and compared the measurements before and after performing each procedure. It was used the the Wilcoxon signed-rank statiscal test, adopting a significance level of 5%. Results: there was less discomfort with statistical significance after the vocal warm-up (p=0.002) and cool-down (p=0.001), with greater magnitude in both aspects related to voice. Conclusions: The vocal warm-up and cool-down have positive effects on the perception of students and should be taught to future teachers in order to prevent vocal disorders. The vocal cool-down, poorly researched, should not be passed over vocal health practices since its purpose showed obvious improvement in the investigated group.

Desempenho motor de escolares com dislexia, transtornos e dificuldades de aprendizagem

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Antinociceptive effects of methadone combined with detomidine or acepromazine in horses

To investigate two protocols to provide antinociception in horses. To evaluate the antinociceptive effects of intravenous methadone combined with detomidine or acepromazine in adult horses. Randomised, blinded, crossover study. Mechanical, thermal and electrical stimuli were applied to the dorsal left and right metacarpus and coronary band of the left thoracic limb, respectively. A thermal stimulus was applied caudal to the withers. The horses were treated with saline (C), a combination of methadone (0.2 mg/kg bwt) and detomidine (10 μg/kg bwt) (MD) or methadone (0.2 mg/kg bwt) and acepromazine (0.05 mg/kg bwt) (MA) at 1 week intervals. Nociceptive thresholds were measured before and at 15 min intervals until 150 min after treatment. Wilcoxon rank-sum and Wilcoxon signed rank tests were used to compare data between groups at each time point and over time within each group, followed by the Bonferroni method to adjust the P value. The mechanical stimulus was the most sensitive test to differentiate the antinociceptive effects of the treatments. Mechanical thresholds were greater after MD than MA between 15 and 30 min and with both MD and MA these thresholds were greater than C from 15 to 60 min. Electrical and thermal limb thresholds were greater after MD than C at 15 and 45 min and at 15, 30, 45, 75 and 105 min, respectively. Thermal limb thresholds were greater with MA than C at 30 min. Thoracic thermal threshold in MD and MA were higher than C at 45, 75, 90 and 120 min and from 30 to 75 min, respectively. Methadone and acepromazine produced less pronounced mechanical antinociception than MD.

Debris, Roughness and Friction of Stainless Steel Archwires Following Clinical Use

Objective: To investigate the degree of debris, roughness, and friction of stainless steel orthodontic archwires before and after clinical use.Materials and Methods: For eight individuals, two sets of three brackets (n = 16) each were bonded from the first molar to the first premolar. A passive segment of 0.019- x 0.025-inch stainless steel archwire was inserted into the brackets and tied by elastomeric ligature. Debris level (via scanning electron microscopy), roughness, and frictional force were evaluated as-received and after 8 weeks of intraoral exposure. Mann-Whitney, Wilcoxon signed-rank, and Spearman correlation tests were used for statistical analysis at the .05 level of significance.Results: There were significant increases in the level of debris (P = .0004), roughness of orthodontic wires (P = .002), and friction (P = .0001) after intraoral exposure. Significant positive correlations (P < .05) were observed between these three variables.Conclusion: Stainless steel rectangular wires, when exposed to the intraoral environment for 8 weeks, showed a significant increase in the degree of debris and surface roughness, causing an increase in friction between the wire and bracket during the mechanics of sliding. (Angle Orthod. 2010;80:521-527.)

Serum Iron Parameters and Acute Experimental EHV-1 Infection in Horses

Background Research in humans has demonstrated that high serum iron (sFe) concentration can predispose to infection, and many infections subsequently result in alterations of host sFe. A decrease in sFe concentration is an early and sensitive indicator of systemic inflammation caused by tissue necrosis, bacterial infections, or endotoxemia in horses. Serum iron parameters in acute equine herpesvirus type 1 (EHV-1) infection have not been evaluated previously. Objectives To document the sFe response to EHV-1 infection and to determine whether or not significant differences in sFe concentration exist between EHV-1 infected horses that develop neurologic disease and those that do not. Animals A total of 14 horses experimentally infected with EHV-1. Methods Data were collected as an ancillary data set during a blinded experimental EHV-1 infection. Horses were infected with the rAb4 strain of EHV-1. Temperature, neurologic score, packed cell volume (PCV), and sFe parameters (sFe concentration, % saturation, and total iron-binding capacity) were recorded daily for 2weeks. Data were evaluated using Wilcoxon signed rank tests and Wilcoxon rank sum tests with Bonferroni corrections. Conclusions and Clinical Relevance Serum iron concentration decreases significantly in a biphasic pattern after EHV-1 infection. There was no significant difference in sFe concentration in horses that developed neurologic disease and those that did not in these experimentally infected animals. Serum iron parameters may be useful in monitoring the clinical course of viral infections such as EHV-1.

Comparison of the Accuracy of Plastic and Metal Stock Trays for Implant Impressions

Purpose: This in vitro study evaluated the dimensional accuracy of two impression techniques (tapered and splinted) with two stock trays (plastic and metal) for implant-supported prostheses. Materials and Methods: A master cast with four parallel abutment analogs and a passive framework were fabricated. Polyvinyl siloxane impression material was used for all impressions with two metal stock trays and two plastic stock trays (closed and open trays). Four groups (tapered plastic, splinted plastic, tapered metal, and splinted metal) and a control group (master cast) were tested (n = 5 for each group). After the framework was seated on each of the casts, one abutment screw was tightened, and the marginal gap between the abutment and framework on the other side was measured with a stereomicroscope. The measurements were analyzed with the Kruskal-Wallis one-way analysis of variance on ranks test followed by the Dunn method. Results: The mean values (+/- standard deviations) for the abutment/framework interface gaps were: master cast, 32 +/- 2 mu m; tapered metal, 44 +/- 10 mu m; splinted metal, 69 +/- 28 mu m; tapered plastic, 164 +/- 58 mu m; splinted plastic, 128 +/- 47 mu m. No significant difference was detected between the master cast, tapered metal, and splinted metal groups or between the tapered and splinted plastic groups. Conclusions: In this study, the rigidity of the metal stock tray ensured better results than the plastic stock tray for implant impressions with a high-viscosity impression material (putty). Statistically similar results were obtained using tapered impression copings and splinted squared impression copings. The tapered impression copings technique and splinted squared impression copings technique with a metal stock tray produced precise casts with no statistically significant difference in interface gaps compared to the master cast. INT J ORAL MAXILLOFAC IMPLANTS 2012;27:544-550.

A clinical trial of the effect of a mouth-rinse prepared with Lippia sidoides Cham essential oil in dogs with mild gingival disease

We evaluated the effect of a mouth-rinse prepared using Lippia sidoides essential oil (EO) in dogs with marginal gingivitis. German Shepherd dogs were distributed in two groups: control (control mouth-rinse) and EO (EO mouth-rinse). Both mouth-rinses were applied on the dogs' teeth every 2 days for 2 weeks. At day 0 and day 15, the scores for plaque-bacteria (P), calculus (C), gingivitis (G) and the inflammatory infiltrate (INF) were evaluated blindly. The results were analyzed by the Wilcoxon signed-rank and Mann-Whitney tests (P less than or equal to 0.05). P, C, G, and INF did not show any alteration in the control group, while in the EO group there were significant reductions in these scores. (C) 2003 Elsevier B.V. B.V. All rights reserved.

Electromyographic analysis of the arm muscles in front support exercises

The electromyographic activity of the biceps brachii - BB (long head), triceps brachii - TB (long head) and deltoideus - DA (clavicular portion) muscles, during the going (G) and return (R) phases in front support exercise, as well the efficacy of this exercise for the development of these muscles strength were studied in 10 male volunteers. The values were normalized through maximum voluntary isometric contraction (MVIC = 100%) and statistically analyzed using the Friedman, DMS and Wilcoxon non-parametric test. A value of p≤0.05 indicated significance (Campos, 1983). All the muscles presented higher electromyographic activity in the return phase of the movement. The triceps brachii was the muscle which had higher activity in both phases of the movement. It was concluded that the front support exercise is efficient for strength development mainly in the triceps brachii muscle.

Comparação da qualidade de vida relacionada à saúde entre mulheres na pós-menopausa praticantes de atividade física com e sem osteoporose

Objective: to investigate the quality of life among physically active post-menopausal women with and without a diagnosis of osteoporosis. Methods: a cross-sectional descriptive study was carried out through interview. All the participating women volunteered to take part of this study through previous contact by telephone. The characteristics and objectives of the interview were explained in addition to confirmation of their post-menopausal status. There were two groups of 21 volunteers each: group 1 were non-osteoporotic women (64.38 ± 4.24 years-old) and group 2 were osteoporotic women (67.81 ± 4.19 years-old). Each volunteer was asked to fulfill a preliminary form in order to register personal information, clinical history, co-morbidities and health care. Following, the SF-36 questionnaire was applied. The Wilcoxon rank-sum test was used to assess differences between the two groups. Results: there was a significant difference (p < 0.05) between both groups only with regard to the Role Physical and General Health components of the SF-36 form showing a better performance to group 1. Condusion: post-menopausal women with a diagnosis of osteoporosis that did not sustain a fracture may present a similar quality of life, as compared to non-osteoporotic post-menopausal women.

Comparison of the accuracy for three dental impression techniques and index: An in vitro study

Objectives: This in vitro study compared the dimensional accuracy of stone index (I) and three impression techniques: tapered impression copings (T), squared impression copings (S) and modified squared impression copings (MS) for implant-supported prostheses. Methods: A master cast, with four parallel implant abutment analogs and a passive framework, were fabricated. Vinyl polysiloxane impression material was used for all impressions with two metal stock trays (open and closed tray). Four groups (I, T, S and MS) were tested (n = 5). A metallic framework was seated on each of the casts, one abutment screw was tightened, and the gap between the analog of implant and the framework was measured with a stereomicroscope. The groups' measurements (80 gap values) were analyzed using software (LeicaQWin - Leica Imaging Systems Ltd.) that received the images of a video camera coupled to a Leica stereomicroscope at 100× magnification. The results were statistically analyzed with Kruskal-Wallis One Way ANOVA on Ranks test followed by Dunn's Method, 0.05. Results: The mean values of abutment/framework interface gaps were: Master Cast = 32 μm (SD 2); Group I = 45 μm (SD 3); Group T = 78 μm (SD 25); Group S = 134 μm (SD 30); Group MS = 143 μm (SD 27). No significant difference was detected among Index and Master Cast (P = .05). Conclusion: Under the limitations of this study, it could be suggested that a more accurate working cast is possible using tapered impression copings techniques and stone index. © 2013 Japan Prosthodontic Society.

Efeito da fisioterapia no pós-operatório da cirurgia de revascularização do miocárdio

Pós-graduação em Bases Gerais da Cirurgia - FMB

Efeito do raloxifeno no epitélio vaginal de mulheres na pós-menopausa

Pós-graduação em Ginecologia, Obstetrícia e Mastologia - FMB

Efeito de programa para mudança do estilo de vida sobre indicadores sanguíneos dos estresses inflamatórios e oxidativo em adultos portadores de componentes da síndrome metabólica

Pós-graduação em Patologia - FMB