Qualidade de frutos de melancia sem sementes em função de fontes e doses de potássio

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cotton root and shoot growth as affected by application of mepiquat chloride to cotton seeds

Estudou-se o efeito do tratamento de sementes de algodão com cloreto de mepiquat sobre o crescimento inicial de raízes e parte aérea. O experimento, realizado em casa de vegetação, utilizou vasos de PVC adaptados com uma parede frontal de vidro e os tratamentos foram constituídos por cinco doses do cloreto de mepiquat (CM) do ingrediente ativo (i.a.): 0, 3, 6, 9 e 12 g kg-1 de sementes, pulverizado sobre as sementes, e a cultivar FM 993. Massa de matéria seca da parte aérea (folhas, pecíolos e haste), massa de matéria seca da raiz, área foliar, relação parte aérea:raiz, relação área foliar:crescimento radicular, o comprimento da parte aérea foram avaliados aos 21 dias após a semeadura. Crescimento radicular foi avaliado a cada três dias até os 18 dias. O CM aplicado às sementes do algodão promove redução da altura da planta e da área foliar, sem, contudo, afetar produção de massa de matéria seca da parte aérea e raiz, relação parte aérea:raiz, relação área foliar:crescimento radicular e comprimento total de raízes do algodoeiro. Assim, no presente experimento não foi observado efeito negativo do CM aplicado às sementes do algodoeiro na absorção de água pela planta.

Importância do fluxo de massa e difusão no suprimento de potássio ao algodoeiro como variável de água e potássio no solo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Produtividade e acúmulo de potássio na soja em função da antecipação da adubação potássica no sistema plantio direto

A aplicação antecipada de fertilizante potássico no cultivo de espécies de cobertura no sistema plantio direto (SPD) pode ser vantajosa para a lavoura comercial. O objetivo deste trabalho foi avaliar a produtividade de grãos e a acumulação de K na soja em função da aplicação antecipada de fertilizante potássico na instalação do milheto em relação com o K aplicado na semeadura da soja subseqüente no SPD. O experimento foi realizado na FCA-Unesp em Botucatu-SP, nas safras 2000/2001, 2001/2002 e 2002/2003. Utilizou-se um Latossolo Vermelho distroférrico de textura média, que estava sendo cultivado com soja e aveia-preta no SPD, por dois anos antes da instalação do experimento. O milheto (Pennisetum glaucum) foi semeado em setembro sobre a palhada de aveia-preta (Avena strigosa), e a soja (Glycine max) na primeira quinzena de dezembro, nos três anos agrícolas. Utilizou-se o delineamento experimental em blocos ao acaso no esquema fatorial 4 x 4, com quatro repetições, com 0, 30, 60 e 90 kg ha-1 de K2O no milheto, combinados com 0, 30, 60 e 90 kg ha-1 de K2O na soja. Coletaram-se plantas de soja aos 25, 50, 75 e 100 dias após a emergência, e os grãos no final do ciclo, para a determinação do acúmulo de K e da produtividade. A antecipação de 60 a 90 kg ha-1 de K2O na semeadura do milheto não comprometeu o acúmulo de K na lavoura de soja. As máximas produtividades de soja foram alcançadas no primeiro e segundo ano com doses de 85 a 90 kg ha-1 de K2O, que poderiam ser antecipadas totalmente na semeadura da gramínea de cobertura. A aplicação antecipada de KCl na semeadura do milheto minimizou a exportação de K pela colheita de grãos de soja.

Cotton response to mepiquat chloride and temperature

Gibberellin inhibitor growth regulators are used for cotton (Gossypium hirsutum L.) canopy manipulation to avoid excess growth and yield losses. However, under temperatures below or over the optimum for cotton production the effect of mepiquat chloride (MC) has not always been significant. In this experiment, cotton plants were grown in growth chambers to study the response to MC as affected by temperature and to determine if an increase in dose could overcome the temperature effects. Mepiquat chloride was applied at rates of 0, 15 and 30 g ai ha-1 at the pinhead square stage. Plants were then grown under three temperature regimes: 25/15 °C, 32/22 °C, and 39/29 °C (day/night temperatures) for 51 days. Higher temperatures increased plant height, reproductive branches, fruit number, fruit abscission, and photosynthesis per unit area, but decreased leaf area and chlorophyll. The largest effect of MC on plant height was observed when the daily temperature was 32 °C, with nights of 22 °C, which was also best for plant growth. High temperatures not only decreased the effectiveness of MC on plant height control, but also caused lower dry matter and fruit number per plant. Low temperatures (25/15 ºC) decreased cotton growth and fruit retention, but a higher concentration of MC was required per unit of growth reduction as compared with 32/22 ºC. At high temperatures, the rate of MC to be applied must be disproportionately increased, because either plant growth is impaired by high temperature lessening the effect of MC, or degradation of MC within the plant is too rapid.

Adubos foliares quelatizados e sais na absorção de boro, manganês e zinco em laranjeira Pera

O presente trabalho teve como objetivo comparar a eficiência de formulações de adubos foliares quelatizados na absorção dos micronutrientes boro, manganês e zinco, com a aplicação convencional de sais em plantas de laranjeira Pera (Citrus sinensis (L.) Osbeck). Para tanto foi conduzido experimento nas dependências do Departamento de Ciência do Solo da Faculdade de Ciências Agronômicas UNESP/Campus de Botucatu, Estado de São Paulo. Utilizaram-se plantas de laranjeira Pera (Citrus sinensis (L.) Osbeck) enxertadas sobre limoeiro Cravo (Citrus limonia Osbeck), com 2 anos de idade, plantadas em caixas de 250 litros. Os adubos foliares utilizados foram: Grex Citros na dose de 1,0 mL L-1; Copas citros 2,0 mL L-1; Plantin Citros 1,0 mL L-1; Citrolino 2,0 mL L-1; Fertamin Citros 1,75 mL L-1; Yogen Citros 2,0 mL L-1; MS-2 1,0 mL L-1; Sais, Sais + 1,0 g L-1 de KCl e Sais substituindo o ZnSO4 pelo ZnCl2. O volume de aplicação, foi de 1 litro de calda planta-1. em todos os tratamentos adicionou-se o espalhante adesivo do grupo químico dos alquifenoletoxilados a 0,03%. A amostragem das folhas foi realizada 30 dias após a aplicação dos tratamentos, coletando-se a 3a ou 4a folha de ramos vegetativos no início do florescimento, dos 4 quadrantes, localizados na região mediana da planta, totalizando 10 folhas por planta. A aplicação foliar de micronutrientes, favoreceu a absorção e resultou no aumento do teor foliar de Mn e Zn mas não de B, sendo que a presença de cloreto aumentou os teores de Zn na folhas de laranjeira Pera , proporcionando maior absorção do que o sulfato e sulfato adicionado ao cloreto de potássio. Os resultados mostram, também, que os produtos quelatizados Yogen e MS-2, para as condições deste estudo, não foram eficientes como fontes fornecedoras de Mn.

Effect of vesicles of dimethyldioctadecylammonium chloride and phospholipids on the rate of decarboxylation of 6-nitrobenzisoxazole-3-carboxylate

Sonicated mixtures of dimethyldioctadecylammonium chloride (DODAC), egg phosphatidylcholine (PC), dimyristoyl phosphatidylcholine (DMPC), and dipalmitoyl phosphatidylcholine (DPPC) were used to analyze vesicle effects on the rate of decarboxylation of 6-nitrobenzisoxazol-3-carboxylic acid (Nboc). Electron microscopic images of the vesicles were obtained with trehalose, a know cryoprotector. Phase diagrams and phase transitions temperatures of the vesicle bilayers were determined. Nboc decarboxylation rates increased in the presence of vesicles prepared with both phospholipids and DODAC/phospholipid mixtures. Quantitative analysis of vesicular effects was done using pseudophase models. Phospholipids catalyzed up to 140-fold while the maximum catalysis by DODAC/lipid vesicles reached 800-fold. Acceleration depends on alkyl chain length, fatty acid insaturation of the lipids, and the DODAC/phospholipid molar ratio. Catalysis is not related to the liquid crystalline-gel state of the bilayer and may be related to the relative position of Nboc with respect to the interface.

Electrochemical evidence of sulfinic acid derivative as an intermediate in the reduction of aromatic sulfonyl chloride in an aprotic medium

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Development of amorphous carbon protective coatings on poly(vinyl)chloride

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Prostaglandin production by human gingival fibroblasts inhibited by triclosan in the presence of cetylpyridinium chloride

Background: the effect of triclosan plus the cationic detergent cetylpyridinium chloride (CPC) was evaluated for prostaglandin inhibition in human gingival fibroblasts. Since triclosan has previously been shown to inhibit proinflammatory cytokine induced prostaglandin E-2 (PGE(2)) production, we wanted to determine if triclosan, in the presence of CPC, could enhance these effects.Methods: Initial studies determined that both triclosan and CPC were cytotoxic to human gingival fibroblasts in concentrations exceeding 1.0 mu g/ml for either agent longer than 24 hours in a tissue culture. Therefore, subsequent studies measuring prostaglandin biosynthesis and cyclooxygenase (COX)-1 and COX-2 mRNA expression were performed in concentrations and times that did not significantly affect cell viability.Results: PGE2 biosynthesis was dose dependently inhibited by both triclosan and triclosan and CPC when challenged by tumor necrosis factor (TNF)-alpha or interleukin (IL)-1 beta. At pharmacologically relevant concentrations, triclosan and CPC inhibited ILAP-induced PGE(2) production to a greater extent than triclosan alone (P = 0.02). Moreover, enhanced COX-2 mRNA repression was observed with triclosan and CPC in comparison to triclosan alone in IL-1 beta and TNF-alpha stimulated cells. No effect on COX-I gene expression was observed. Further analysis of cell signaling mechanisms of triclosan and CPC indicates that nuclear factor-kappa B (NF-kappa B) and not p38 mitogen-activated protein kinase (MAPK) signaling may be impaired in the presence of triclosan and CPC.Conclusion: This study indicates that triclosan and CPC are more effective at inhibiting PGE(2) at the level of COX-2 gene regulation, and this combination may offer a potentially better anti -inflammatory agent in the treatment of inflammatory lesions in the oral cavity.

Baclofen into the lateral parabrachial nucleus induces hypertonic sodium chloride and sucrose intake in rats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Determination of the maximum inhibitory dilution of cetylpyridinium chloride-based mouthwashes against Staphylococcus aureus: an in vitro study

The aim of this in vitro study was to determine the maximum inhibitory dilution (MID) of four cetylpyridinium chloride (CPC)based mouthwashes: CPC+Propolis, CPC+Malva, CPC+Eucaliptol+Jua+Roma+Propolis (Natural Honey (R)) and CPC (Cepacol (R)), against 28 Staphylococcus aureus field strains, using the agar dilution method. Decimal dilutions ranging from 1/10 to 1/655,360 were prepared and added to Mueller Hinton Agar. Strains were inoculated using Steers multipoint inoculator. The inocula were seeded onto the surface of the culture medium in Petri dishes containing different dilutions of the mouthwashes. The dishes were incubated at 37 degrees C for 24 h. For readings, the MID was considered as the maximum dilution of mouthwash still capable of inhibiting microbial growth. The obtained data showed that CPC+Propolis had antimicrobial activity against 27 strains at 1/320 dilution and against all 28 strains at 1/160 dilution, CPC+Malva inhibited the growth of all 28 strains at 1/320 dilution, CPC+Eucaliptol+Jua+Roma+Propolis inhibited the growth of 2 strains at 1/640 dilution and all 28 strains at 1/320 dilution, and Cepacol (R) showed antimicrobial activity against 3 strains at 1/320 dilution and against all 28 strains at 1/160 dilution. Data were submitted to Kruskal-Wallis test, showing that the MID of Cepacol (R) was lower than that determined for the other products (p<0.05). In conclusion, CPC-mouthwashes showed antimicrobial activity against S. aureus and the addition of other substances to CPC improved its antimicrobial effect.

The Influence of Calcium Chloride on the Setting Time, Solubility, Disintegration, and pH of Mineral Trioxide Aggregate and White Portland Cement with a Radiopacifier

This study evaluated the influence of addition of 10% calcium chloride (CaCl(2)) on the setting time, solubility, disintegration, and pH of white MTA (WMTA) and white Portland cement (WPC). A test of the setting time was performed following the #57 ADA specifications and a test of the final setting time according to the ASTM. For the solubility tests disintegration and pH, Teflon rings were filled with the cements and weighed after setting. After 24 h in a desiccator, they were once again weighed. Thereafter, they were immersed in MiliQ water for 24 and 72 h and 7, 14, and 28 days, with maintenance in the desiccator and weighing between periods. The pH of water in which the rings were immersed was measured immediately after contact with them and in the other periods. The addition of CaCl(2) provided a significant reduction (50%) in the initial setting time of cements. The final setting time of WMTA was reduced in 35.5% and the final setting time of WPC in 68.5%. The WMTA with CaCl(2) absorbed water and gained weight with time, except for in the 24-h period. The addition of CaCl(2) to the WPC reduced its solubility. The addition of CaCl(2) increased the pH of WMTA in the immediate period and at 24 and 72 h and for WPC in the immediate period and at 24 h. The addition of CaCl(2) to WMTA and WPC reduced the setting times and solubility of both and increased the pH of cements in the initial periods. (J Endod 2009;35:550-554)

Histochemical technique for the detection of chloride cells in fish

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Morphological Changes in Poly(Caprolactone)/Poly(Vinyl Chloride) Blends Caused by Biodegradation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)