Phenotypical characterization and adhesin identification in Escherichia coli strains isolated from dogs with urinary tract infections

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effects of substrate and mechanical scarification on the germination of Syagrus oleracea (Arecaceae) seeds

The slow and uneven germination of Syagrus oleracea seeds represents a problem for its propagation, especially for commercial production. This work aimed to study the effects of substrate and mechanical scarification on the germination of S. oleracea seeds. Germination (% G), emergence rate (ER), leaf area (cm(2)), root length (cm), leaf dry mass (g) and root dry mass (g) were also determined. Non-scarified seeds sown in vermiculite germinated faster and showed higher germination (65%), as well as greater root length (16.55 cm). leaf dry mass (5.07 g) and root dry mass (12.41 g), when compared to the scarified seeds.

Genetic diversity and antifungal susceptibility testing of Trichosporon asahii isolated of Intensive Care Units patients

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Comportamento plástico do aço inoxidável austenítico em baixa temperatura

Ensaios de tração uniaxiais foram empregados para deformar aços inoxidáveis austeníticos do tipo 304, em diferentes temperaturas abaixo da ambiente (de 77 K a 300 K). A relação entre a estabilidade da austenita e o encruamento, em função da temperatura de teste, é discutida quanto à transformação martensítica induzida por deformação e ao deslizamento de discordâncias na austenita. em curvas tensão-deformação que assumem a equação de Ludwik sigma = sigmao + képsilonn, na qual sigma é a tensão verdadeira e e a elongação plástica verdadeira, um modo conveniente para analisar o encruamento é por meio do diagrama log dsigma / dépsilon versus log épsilon. O aspecto significativo é a variação da taxa de encruamento dsigma / dépsilon com a elongação plástica verdadeira nas diferentes temperaturas. As mudanças no comportamento do encruamento motivando até três estágios de deformação são associadas a diferentes processos microestruturais. A transformação martensítica pode ser considerada como um processo de deformação que compete com o processo usual de deslizamento. A investigação desses estágios, na região plástica, produz uma referência qualitativa de como diferentes fatores, tais como o grau de deformação, temperatura e composição química da austenita, afetam a transformação austenita-martensita.

Genotypic characterization of Toxoplasma gondii in sheep from Brazilian slaughterhouses: New atypical genotypes and the clonal type II strain identified

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Productive consequences of fasting neonatal chicks of different genetic constitutions for growing

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Post-thaw viability of in vivo-produced canine blastocysts cryopreserved by slow freezing

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Microdilution procedure for antifungal susceptibility testing of Paracoccidioides brasiliensis to amphotericin B and itraconazole

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Morphological and physiological responses of the recalcitrant Euterpe edulis seeds to light, temperature and gibberellins

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Interfacial fracture of dentin adhesively bonded to quartz-fiber reinforced composite

The paper presents the results of an experimental study of interfacial failure in a multilayered structure consisting of a dentin/resin cement/quartz-fiber reinforced composite (FRC). Slices of dentin close to the pulp chamber were sandwiched by two half-circle discs made of a quartz-fiber reinforced composite, bonded with bonding agent (All-bond 2, BISCO, Schaumburg) and resin cement (Duo-link. BISCO, Schaumburg) to make Brazil-nut sandwich specimens for interfacial toughness testing. Interfacial fracture toughness (strain energy release rate, G) was measured as a function of mode mixity by changing loading angles from 0 degrees to 15 degrees. The interfacial fracture surfaces were then examined using Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectroscopy (EDX) to determine the failure modes when loading angles changed. A computational model was also developed to calculate the driving forces, stress intensity factors and mode mixities. Interfacial toughness increased from approximate to 1.5 to 3.2 J/m(2) when the loading angle increases from approximate to 0, 0 to 15 degrees. The hybridized dentin/cement interface appeared to be tougher than the resin cement/quartz-fiber reinforced epoxy. The Brazil-nut sandwich specimen was a suitable method to investigate the mechanical integrity of dentin/cement/FRC interfaces. (C) 2011 Elsevier B.V. All rights reserved.

Crescimento e desempenho de linhagens de aves pescoço pelado criadas em sistema semi-confinado

Este trabalho foi realizado para avaliar o crescimento e desempenho de duas linhagens de aves pescoço pelado. Foram utilizadas 400 aves, distribuídas em um delineamento inteiramente casualizado, os tratamentos consistiram de um esquema fatorial 2 x 2 (linhagens x sexo), com cinco repetições de 20 aves cada. Foram utilizadas aves Pescoço Pelado das linhagens Sasso e ISA Label. As aves receberam rações formuladas à base de milho e de farelo de soja para atender às exigências nutricionais. Foi determinado o ganho de peso (GP), o consumo de ração (CR) e a conversão alimentar (CA) aos 28, 56 e 84 dias de idade e o rendimento de carcaça e de partes aos 84 dias de idade. Não foi observada interação entre sexo e linhagem (P>0,05) para nenhuma das variáveis de desempenho analisadas. Para CR e GP houve diferenças significativas (P<0,05) entre as linhagens e entre os sexos nos três períodos. As aves da linhagem Sasso apresentaram desempenho superior à ISA Label. em relação aos parâmetros descritos da equação de Gompertz, as aves da linhagem Sasso apresentaram maior peso à maturidade (Pm) e tempo em que a taxa de crescimento é máxima (t*) e menor taxa de maturidade (b), indicando que as aves da linhagem ISA Label foram mais precoces para atingir a idade de máximo crescimento. As fêmeas demonstraram melhor aptidão para rendimento de peito e os machos para o rendimento de coxa e de sobra-coxa.

Comparison between E-test and CLSI broth microdilution method for antifungal susceptibility testing of Candida albicans oral isolates

Trinta Candida albicans isoladas de pacientes portadores de candidose oral e 30 Candida albicans isoladas de indivíduos controle foram estudadas. Testes de susceptibilidade in vitro foram realizados com anfotericina B, fluconazol, 5-flucitosina e itraconazol pelo método do Clinical and Laboratorial Standars Institute (CLSI) e por E-test. Os resultados obtidos foram analisados e comparados. Os valores de CIM foram semelhantes para amostras isoladas de pacientes portadores de candidose oral e indivíduos controle. A concordância entre os dois métodos foi de 66,7% para a anfotericina B, 53,33% para o fluconazol, 65% para a flucitosina e 45% para o itraconazol. de acordo com estes resultados, o método do E-test poderia ser uma alternativa para a triagem de casos de rotina pela sua simplicidade. Entretanto, este método não pode ser considerado como um substituto para o método de referência do CLSI.

STUDIES ON THE RELATIONSHIP BETWEEN THE PATHOGENICITY OF PARACOCCIDIOIDES-BRASILIENSIS IN MICE AND ITS GROWTH-RATE UNDER DIFFERENT OXYGEN ATMOSPHERES

We performed comparative studies of the pathogenicity of six strains of Paracoccidioides brasiliensis (Bt-9, Bt-4, Pb-9, Pb-18, Bt-7 and B-1183) for young adult male ddY mice and growth rate of each strain under different oxygen atmospheres (aerobic, micro-aerobic and anaerobic atmospheres) at 37-degrees-C. 10(6) units of yeast cells were intravenously injected into each mouse. The pathogenicity of each isolate was determined by a scoring system based on organ culture and histopathological findings. The growth rates under different oxygen atmospheres were determined by a scoring system in which 300 fungal units per strain were counted. The strain Bt-9 showed the greatest pathogenicity, followed by Bt-4. Pb-9 and Pb-18 had on intermediate rank of pathogenicity. Bt-7 and B-1183 were the least pathogenic of the strains tested. Except for strain Bt-7 all strains showed an excellent growth under an aerobic atmosphere. Bt-4 and Bt-9 also showed excellent growth under a micro-aerobic atmosphere, followed by Pb-9, whereas the growth of Pb-18, Bt-7 and B-1183 was limited. There was a correlation between the growth rate under a micro-aerobic atmosphere and the pathogenicity of a strain. The growth rate of P. brasiliensis under a micro-aerobic atmosphere strongly correlated to its pathogenicity.

Fabrication and testing of a poly(vinylidene fluoride) (PVDF) microvalve for gas flow control

A microactuator made from poly(vinylidene fluoride) (PVDF), a piezoelectric polymer, was fabricated to control the gas flow rate through a glass micronozzle. The actuator was formed by gluing together two PVDF sheets with opposite polarization directions. The sheets were covered with thin conducting films on one side, that were then used as electrodes to apply an electric field to move the valve. The actuator has a rectangular shape, 3 mm x 6 mm. The device was incorporated with a micronozzle fabricated by a powder blasting technique. Upon applying a DC voltage across the actuator electrodes, one sheet expands while the other contracts, generating an opening motion. A voltage of +300 V DC was used to open the device by moving the actuator 30 mu m, and a voltage of -200 V DC was used to close the device by moving the actuator 20 mu m lower than the relaxed position. Flow measurements were performed in a low-pressure vacuum system, maintaining the microvalve inlet pressure constant at 266 Pa. Tests carried out with the actuator in the open position and with a pressure ratio (inlet pressure divided by outlet pressure) of 0.5, indicated a flow rate of 0.36 sccm. In the closed position, and with a pressure ratio of 0.2, a flow rate of 0.32 sccm was measured.

Development of a pressure nociceptive threshold testing device for evaluation of analgesics in cats

A pressure analgesiometric device was developed for unrestrained cats. Eleven cats were studied. Stimulation was via three rounded pins within a bracelet on the forearm. The pins were advanced by manual bladder inflation. Bladder pressure was measured using a strain gauge pressure transducer. The threshold was recorded at the behavioural end point. Thresholds were measured at 5 and 15 min intervals for 2-4 h, after removal/replacement of the cuff, for 120 min after SC butorphanol (0.4 mg/kg), and with mild skin inflammation at the testing site. Data were analysed using ANOVA. Pressure thresholds in untreated cats were around 150 mmHg. The minimum interval for testing was established as 15 min. Data were reproducible over 4 h and beyond 24 h. Thresholds in 5 cats increased (P < 0.05) above baseline for 45 min after butorphanol with a maximum increase of 270 +/- 182 mmHg at 10 min. Thresholds decreased with inflammation. The method appears suitable for feline analgesia investigations. (c) 2006 Elsevier Ltd. All rights reserved.