Breeding potential of maize composite Isanao VF1 in small spacing in the second growing season

The purpose of this study was to verify the breeding potential of the maize composite Isanao VF1 in the second growing season. One hundred and fifty half-sib progenies were evaluated of spacing of 0.45 m, densities of 57,778 and 80,000 plants ha(-1), in a randomized block design with three replications. Gains of 16.0 and 19.2% were estimated for grain Yield, H. I and 10.5% for prolificacy and 12.3 and 12.9% for ear height, respectively, at 57,778 and 80,000 plants ha(-1). The heritabilities for plant height, ear height and grain yield were 65.2 and 61.3%, 64.3 and 66.9% and 53.5 and 63.3%, respectively, confirming the potential for breeding at both densities. The absence of progeny by density interaction indicates that no further selection programs are necessary. The occurrence of segregation for modifier genes for height suggests stabilizing selection based on ear height.

The kinetics of donor cell mtDNA in embryonic and somatic donor cell-derived bovine embryos

The mechanisms controlling the outcome of donor cell-derived mitochondrial DNA (mtDNA) in cloned animals remain largely unknown. This research was designed to investigate the kinetics of somatic and embryonic mtDNA in reconstructed bovine embryos during preimplantation development, as well as in cloned animals. The experiment involved two different procedures of embryo reconstruction and their evaluation at five distinct phases of embryo development to measure the proportion of donor cell mtDNA (Bos indicus), as well as the segregation of this mtDNA during cleavage. The ratio of donor cell (B. indicus) to host oocyte (B. taurus) mtDNA (heteroplasmy) from blastomere- (NT-B) and fibroblast- (NT-F) reconstructed embryos was estimated using an allele-specific PCR with fluorochrome-stained specific primers in each sampled blastomere, in whole blastocysts, and in the tissues of a fibroblast-derived newborn clone. NT-B zygotes and blastocysts show similar levels of heteroplasmy (11.0% and 14.0%, respectively), despite a significant decrease at the 9-16 cell stage (5.8%; p < 0.05). Heteroplasmy levels in NT-F reconstructed zygotes, however, increased from an initial low level (4.7%), to 12.9% (p < 0.05) at the 9-16 cell stage. The NT-F blastocysts contained low levels of heteroplasmy (2.2%) and no somatic-derived mtDNA was detected in the gametes or the tissues of the newborn calf cloned. These results suggest that, in contrast to the mtDNA of blastomeres, that of somatic cells either undergoes replication or escapes degradation during cleavage, although it is degraded later after the blastocyst stage or lost during somatic development, as revealed by the lack of donor cell mtDNA at birth.

Validation of microsatellite markers for assisted selection of soybean genotypes resistant to powdery mildew

Powdery mildew is one of the most serious diseases of soybean and is found in all producing countries. The purpose of this study was to validate microsatellite markers previously identified as associated with resistance to powdery mildew in soybean. The study was conducted in two F, parent populations with contrasting resistance to powdery mildew, In the analysis 10 SSR primers were used for the populations. and tour polymorphic markers were identified for cross I (MGBR95-20937 x IAC-Foscarin 31) and three for cross 2 (MGBR-46 x Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) 48). The Chi-square analysis of the phenotypic evaluation confirmed the expected segregation (3: 1) of a dominant gene related to resistance. The polymorphic markers also segregated as expected (1:2:1). The markers Sat 366 and Sat 393 in the crosses 1 and 2. respectively, located at 9.41 and 12.45 cM from the gene. were considered promising for marker-assisted selection for resistance to powdery mildew in soybean. at a selection efficiency of 92.7% and 60.3% respectively.

Marcadores RAPD para detecção de resistência à ferrugem-asiática-da-soja

Os objetivos deste trabalho foram confirmar a herança da resistência da PI 459025 (Rpp4) à ferrugem-asiática-da-soja e identificar marcadores moleculares do tipo RAPD, ligados a este gene de resistência, em populações de soja. Pelo cruzamento dos genitores contrastantes PI 459025 x Coodetec 208 obteve-se uma população, cujas populações das gerações F2 e F2:3 foram artificialmente infectadas e avaliadas quanto à reação ao fungo Phakopsora pachyrhizi, pelo tipo de lesão (RB - resistente e TAN - suscetível). Com os resultados da avaliação fenotípica, dois bulks foram obtidos com DNA de plantas homozigóticas resistentes e suscetíveis, respectivamente, pela análise de bulks segregantes. de 600 iniciadores RAPD aleatórios, foram identificados três com fragmentos polimórficos entre os bulks e parentais contrastantes quanto à resistência. Pela análise do qui-quadrado, confirmaram-se: a herança monogênica, com dominância completa quanto à resistência ao patógeno, e a segregação 3:1 para a presença de banda dos três marcadores. Os três marcadores são ligados respectivamente a 5,1, 6,3 e 14,7 cM de distância do loco de resistência, em fase de repulsão no grupo de ligação G, o que foi confirmado pela utilização do marcador microssatélite Satt288. Estes marcadores são promissores na seleção assistida para resistência à ferrugem-asiática-da-soja.

CLONAGEM do JAMBEIRO-ROSA (Syzygium malacensis) POR ESTAQUIA DE RAMOS ENFOLHADOS

O jambeiro-rosa é uma fruteira exótica que representa uma alternativa aos fruticultores, devido às características organolépticas de seus frutos. em virtude da segregação genética e ausência de sementes em vários clones, procurou-se, neste trabalho, estudar a propagação vegetativa, utilizando-se de estacas com folhas e a influência do tratamento com AIB. O trabalho foi realizado na Área experimental de fruticultura da Faculdade de Ciências Agrárias e Veterinárias -- UNESP, Câmpus de Jaboticabal, São Paulo, no período de outubro de 1998 a março de 1999, tendo como objetivo avaliar a capacidade de enraizamento de estacas com folhas apicais e subapicais de jambeiro-rosa com a utilização de diferentes concentrações de ácido indolbutírico (AIB). O delineamento experimental utilizado foi o inteiramente casualizado, em um esquema fatorial 2 x 4 (2 tipos de estacas e 4 concentrações de AIB), com 4 repetições e 10 estacas por parcela, num total de 320 estacas. As concentrações de AIB utilizadas foram: 0; 100; 200 e 400 mg.L-1, e as estacas foram colocadas em imersão lenta por 14 horas, no escuro. Foram avaliados os percentuais de sobrevivência das estacas e enraizamento das estacas, número médio de raízes e brotos por estaca, e comprimento médio dos brotos. Observou-se que o jambeiro-rosa pode ser propagado por estacas com folhas apicais sem a utilização de AIB.

Segregação de fertilizantes aplicados a lanço

A uniformidade transversal da distribuição de fertilizantes e corretivos a lanço tem grande dependência da qualidade e da condição física do produto a ser aplicado. Especialmente no caso das formulações, esse aspecto é relevante e por isso o presente trabalho teve o objetivo de verificar a distribuição dos grãos e a constância na formulação aplicada na extensão da largura de trabalho de uma máquina distribuidora a lanço com dois fertilizantes. Foram efetuadas análises químicas do produto depositado em coletores dispostos transversalmente e analisadas as distribuições individuais dos elementos das fórmulas. Os resultados evidenciam que os fertilizantes apresentaram diferenças na sua formulação ao longo da largura, sendo que o fertilizante que continha micronutrientes obteve maiores desvios (de até 100%) em relação à formulação aplicada, e sua segregação foi elevada em relação aos macronutrientes primários (até 9,5% para N) e secundários estudados (até 39,0% para Ca), o que também indica distribuição de pior qualidade dos fertilizantes. O outro fertilizante apresentou desvios de até 17,8% para N e 34,1% para K na formulação ao longo da largura de aplicação.

INHERITANCE of CUCUMBER TOLERANCE TO ZUCCHINI YELLOW MOSAIC VIRUS

Studies were carried out in Brazil to study the inheritance of tolerance to Zucchini yellow mosaic virus (ZYMV) in cucumber cv. Formosa. This cultivar was individually crossed with two cucumber lines from different varietal types (L(b) from a Brazilian type, and L(j) from a Japanese type), both susceptible to the virus. Two experiments, one for each line, were separately carried out, where 6 treatments (parents, generations F1, F2 and F1BC1 for both parents) were evaluated in a randomized block design with 5 repetitions. Cotyledons of 2-week-old cucumber seedlings were inoculated with ZYMV. Only the plants that did not show symptoms up to 63 days post inoculation were considered as tolerant. A chi-square (chi(2)) analysis for assessing segregation from F2 and both F1BC1, led to the conclusion that the tolerance found in cv. Formosa is determined by a recessive gene.

Columnar microstructure of nanocrystalline Ga1-xMnxN films deposited by reactive sputtering

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Disorder effects produced by the Mn and H incorporations on the optical absorption edge of Ga1-xMnxAs:H nanocrystalline films

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Structural Characterization of Nanocrystalline Sb-Doped SnO2 Xerogels by Multiedge X-ray Absorption Spectroscopy

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A Comparison of Deep Drawing and Ironing of Metal Alloy Strip Produced conventionally and Non-conventionally via Semi Solid Material Processing

A semi solid thin strip continuous casting process was used to obtain 50%wt Pb/50%wtSn strip by single and twin roll processing at speed of 15 m/min. A 50%wt Pb/50%wtSn plate ingot was also cast for rolling conventionally into strips of 1.4 mm thickness and 45 mm width for comparison with those achieved non-conventionally. This hypoeutectic alloy has a solidification interval and fusion temperature of approximately 31 degrees C and 215 degrees C respectively. The casting alloy temperature was around 280 degrees C as measured by a type K immersion thermocouple prior to pouring into a tundish designed to maintain a constant melt flow on the cooling slope during semi solid material production. A nozzle with a weir ensures that the semi solid material is dragged smoothly by the lower roll, producing strip with minimum contamination of slag/oxide. The temperatures of the cooling slope and the lower roll were also monitored using K type thermocouples. The coiled semi solid strip, which has a thickness of 1.5 mm and 45 mm width, was rolled conventionally in order to obtain 1.2 mm thick strip. The coiled thixorolled strip had a thickness of 1.2 mm and achieved practically the same width as the conventional strips. Blanks of 40 mm diameter were cut from the strips in a mechanical press, ready for deep drawing and ironing for mechanical characterization. All the strips achieved from non-conventional processing had the same mechanical performance as those achieved conventionally. The limiting drawing ratio (LDR) achieved was approximately 2.0 for all strips. Microscopy examination was made in order to observe phase segregation during processing.

Variability of physicochemical properties of an epoxy resin sealer taken from different parts of the same tube

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A nonsense mutation in the tyrosinase gene causes albinism in water buffalo

Background: Oculocutaneous albinism (OCA) is an autosomal recessive hereditary pigmentation disorder affecting humans and several other animal species. Oculocutaneous albinism was studied in a herd of Murrah buffalo to determine the clinical presentation and genetic basis of albinism in this species.Results: Clinical examinations and pedigree analysis were performed in an affected herd, and wild-type and OCA tyrosinase mRNA sequences were obtained. The main clinical findings were photophobia and a lack of pigmentation of the hair, skin, horns, hooves, mucosa, and iris. The results of segregation analysis suggest that this disease is acquired through recessive inheritance. In the OCA buffalo, a single-base substitution was detected at nucleotide 1,431 (G to A), which leads to the conversion of tryptophan into a stop codon at residue 477.Conclusion: This premature stop codon produces an inactive protein, which is responsible for the OCA buffalo phenotype. These findings will be useful for future studies of albinism in buffalo and as a possible model to study diseases caused by a premature stop codon.

Effect of single nucleotide polymorphisms of CAPN1 and CAST genes on meat traits in Nellore beef cattle (Bos indicus) and in their crosses with Bos taurus

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Assessment of GH1, CAPN1 and CAST polymorphisms as markers of carcass and meat traits in Bos indicus and Bos taurus-Bos indicus cross beef cattle

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)