Degree of conversion of nanofilled and microhybrid composite resins photo-activated by different generations of LEDs

Objective: This study aimed at evaluating the degree of conversion (DC) of four composite resins, being one nanofilled and 3 microhybrid resins, photo-activated with second- and third-generation light-emitting diodes (LEDs). Material and methods: Filtek (TM) Z350 nanofilled composite resins and Amelogen (R) Plus, Vit-l-escence (TM) and Opallis microhybrid resins were photo-activated with two second-generation LEDs (Radii-cal and Elipar Free Light (TM) 2) and one third-generation LED (Ultra-Lume LED 5) by continuous light mode, and a quartz halogen-tungsten bulb (QHT, control). After 24 h of storage, the samples were pulverized into fine powder and 5 mg of each material were mixed with 100 mg of potassium bromide (KBr). After homogenization, they were pressed, which resulted in a pellet that was evaluated using an infrared spectromer (Nexus 470, Thermo Nicolet) equipped with TGS detector using diffuse reflectance (32 scans, resolution of 4 cm(-1)) coupled to a computer. The percentage of unreacted carbon-carbon double bonds (% C=C) was determined from the ratio of absorbance intensities of aliphatic C=C (peak at 1637 cm-1) against internal standard before and after curing of the specimen: aromatic C-C (peak at 1610 cm-1). Results: The ANOVA showed a significant effect on the interaction between the light-curing units (LCUs) and the composite resins (p<0.001). The Tukey's test showed that the nanofilled resin (Filtek (TM) Z350) and Opallis when photo-activated by the halogen lamp (QTH) had the lowest DC compared with the other microhybrid composite resins. The DC of the nanofilled resin (Filtek (TM) Z350) was also lower using LEDs. The highest degrees of conversion were obtained using the third-generation LED and one of second-generation LEDs (Elipar Free Light (TM) 2). Conclusions: The nanofilled resin showed the lowest DC, and the Vit-l-escence (TM) microhybrid composite resin showed the highest DC. Among the LCUs, it was not possible to establish an order, even though the second-generation LED Radii-cal provided the lowest DC.

Search for single production of scalar leptoquarks in p(p)over-bar collisions decaying into muons and quarks with the D0 detector

lWe report on a search for second generation leptoquarks (LQ(2)) which decay into a muon plus quark in (p) over barp collisions at a center-of-mass energy of root s = 1.96 TeV in the DO detector using an integrated luminosity of about 300 pb(-1). No evidence for a leptoquark signal is observed and an upper bound on the product of the cross section for single leptoquark production times branching fraction into a quark and a muon was determined for second generation scalar leptoquaiks as a function of the leptoquark mass. This result has been combined with a previously published DO search for leptoquark pair production to obtain leptoquark mass limits as a function of the leptoquark-muon-quark coupling, lambda. Assuming lambda = 1, lower limits on the mass of a second generation scalar leptoquark coupling to a u quark and a muon are m(LQ2) > 274 GeV and m(LQ2) > 226 GeV for beta = 1 and beta = 1/2, respectively. (c) 2007 Elsevier B.V. All rights reserved.

Advances and Developments in Strategies to Improve Strains of Saccharomyces cerevisiae and Processes to Obtain the Lignocellulosic Ethanol-A Review

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fertility tables of two populations of the parthenogenetic species Poratia salvator (Diplopoda, Polydesmida, Pyrgodesmidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Prevalence of precancerous skin lesions and non-melanoma skin cancer in Japanese-Brazilians in Bauru, São Paulo State, Brazil

Manifestações cutâneas pré-neoplásicas e neoplásicas em asiáticos são infreqüentes e pouco documentadas. O Brasil possui o maior contingente de imigrantes japoneses e 70% deles residem no Estado de São Paulo. A prevalência dessas lesões em nipo-brasileiros é desconhecida. O presente estudo tem como objetivo avaliar a prevalência de queratoses actínicas e tumores cutâneos não melanomas em nipo-brasileiros acima de trinta anos de 1ª geração ou 2ª geração, sem miscigenação, residentes na cidade de Bauru, no ano de 2006. Dos 567 nipo-brasileiros submetidos a exame dermatológico, diagnosticou-se queratose actínica em 76 pacientes, com média de idade de 68,9 anos, e único carcinoma basocelular em paciente do sexo feminino de 39 anos. No Japão, a prevalência de queratose actínica é de 0,76% a 5% e a incidência de tumores cutâneos não melanomas é de 1,2 a 5,4/100 mil. Os nipo-brasileiros de Bauru apresentaram prevalência de 13,4% de queratoses actínicas e idade mais precoce de aparecimento. Proximidade com o Equador e atividades rurais contribuem para esses achados. A presença de melanose solar demonstrou risco 1,9 vez maior de desenvolver queratose actínica.

Práticas de gestão da cadeia de suprimentos e seus eventuais relacionamentos com as prioridades competitivas da produção: evidências empíricas do setor eletroeletrônico à luz de modelagem de equações estruturais

Este artigo tem como objetivo identificar as práticas de gestão da cadeia de suprimentos que estão sendo adotadas no setor eletroeletrônico brasileiro e verificar se as prioridades competitivas da produção das empresas desse setor se relacionam com a adoção de tais práticas. Desenvolveu-se uma pesquisa empírica, de cunho quantitativo, a partir da realização de uma pesquisa survey por e-mail com gerentes de empresas do setor eletroeletrônico da Associação Brasileira da Indústria Elétrica e Eletrônica. Técnicas estatísticas descritivas e multivariadas de segunda geração (modelagem de equações estruturais) foram empregadas para analisar os dados obtidos. Como principais resultados deste artigo destacam-se: a) as práticas de gestão da cadeia de suprimentos que estão sendo mais implantadas são voltadas à integração e apoio das atividades de desenvolvimento de produtos com os clientes; e b) não foram verificadas relações significativas entre as prioridades competitivas das empresas estudadas e a adoção de práticas de gestão da cadeia de suprimentos.

Gestão de recursos humanos e desempenho operacional: evidências empíricas

A gestão de recursos humanos é frequentemente apontada como uma variável que influencia positivamente no desempenho das organizações. Enquanto argumentos e proposições teóricas de teor similar se multiplicam na literatura especializada, ainda são raras as pesquisas que lançam luzes sobre essa relação para empresas brasileiras. Nesse sentido, foi realizada uma pesquisa com o objetivo de verificar, empiricamente, se a gestão de recursos humanos influencia de maneira positiva o desempenho de empresas do segmento de autopeças e componentes automotivos em suas operações. Metodologicamente, realizou-se um survey com 75 empresas do setor mencionado, cujos dados foram analisados por meio de modelagem de equações estruturais, uma análise multivariada de segunda geração. A principal hipótese da pesquisa foi confirmada, revelando que, de fato, a gestão de recursos humanos está positivamente relacionada com o desempenho operacional das empresas analisadas.

Verdes e competitivas?: a influência da gestão ambiental no desempenho operacional de empresas brasileiras

Argumentos de que a gestão ambiental pode se relacionar positivamente com o desempenho operacional das empresas vêm se propagando pela literatura especializada desde a década de 1990. Esses argumentos ficaram conhecidos como abordagem verde e competitiva ou Hipótese ganha-ganha, de que tanto o Meio Ambiente quanto as empresas se beneficiariam com a adoção de práticas de gestão ambiental. Entretanto, há uma lacuna sobre tal temática, que carece de evidências empíricas que validem ou refutem tais argumentos para a realidade brasileira. Por isso, esta pesquisa tem o objetivo de verificar empiricamente, se a gestão ambiental influencia positivamente o desempenho das operações de empresas do setor automotivo brasileiro, com foco no segmento de autopeças e componentes automotivos. Metodologicamente, realizou-se um survey com 75 empresas do setor mencionado, cujos dados foram analisados por meio de Modelagem de Equações Estruturais, uma análise multivariada de segunda-geração. Os principais resultados indicam que a adoção de práticas de gestão ambiental se relaciona positivamente com o desempenho operacional das empresas analisadas, confirmando a hipótese da pesquisa. Entretanto, a gestão ambiental explica o desempenho operacional com intensidade fraca, o que pode indicar que há outras variáveis de gestão organizacional influenciando o desempenho operacional das empresas, merecendo pesquisas futuras.

A case study of the 9 August 1988 South Atlantic storm: Numerical simulations of the wave activity

During 9-11 August 1988, a cyclone developed over Uruguay in the lee of the Andes Mountains and moved over the South Atlantic Ocean, where it redeveloped into an intense storm. This storm was responsible for unusual wave activity along the Brazilian shoreline from 22° to 32°S. The Brazilian news media reported the loss of at least one life, waves of 3 m and higher, and the disappearance of a drainage pipe, which weighed 8000 kg, off the shores of Rio de Janeiro. In this paper, the evolution of this intense storm and the associated ocean wave response is studied through European Centre for Medium-Range Weather Forecasts analyses, a hydrostatic limited-area meteorological model, and a second-generation prognostic wave model. The atmospheric model results indicated the presence of a long-lived and large fetch with surface wind velocities higher than 12 m s -1 directed toward the coast. Some areas with velocities of 20 m s -1 were embedded in the fetch. The wave model forced by this wind field was able to simulate waves with a significant height of 8 m far from the coast and about 4 m in regions very close to the Brazilian coast in agreement with the occurrence reported at Rio de Janeiro. The swell propagation toward the coast of Rio de Janeiro was obstructed by a northeastward 10-m wind during the first 24-h period of the model's integration. During the second 24-h period, the fetch was still large and strong, but the obstacle was removed by a counterclockwise rotation of wind direction favoring the swell and windsea propagation toward the Rio de Janeiro coast.

Double-blind comparison of venlafaxine and amitriptyline in outpatients with major depression with or without melancholia

The purpose of this study was to compare the efficacy and tolerability of venlafaxine and amitriptyline in outpatients with major depression with or without melancholia. This was an 8-week, multicentre, randomized, double-blind, parallel-group comparison of venlafaxine and amitriptyline. Outpatients with DSM-IV major depression, a minimum score of 20 on the 21-item Hamilton Depression Rating Scale (HAM-D), and depressive symptoms for at least 1 month were eligible. Patients were randomly assigned to venlafaxine or amitriptyline, both drugs titrated to a maximum of 150 mg/day until study day 15. The primary efficacy variables were the final on-therapy scores on the HAM-D, Montgomery-Asberg Depression Rating Scale and Clinical Global Impression severity scales. Data were evaluated on an intent-to-treat basis using the LOCF method. One hundred and 16 patients were randomized, and 115 were evaluated for efficacy. Both drugs showed efficacy in the treatment of depression with or without melancholia. No significant differences were noted between treatments for any efficacy parameter. However, significantly (p < 0.05) more patients in the amitriptyline group had at least one adverse event. These results should support the efficacy and tolerability of venlafaxine in comparison with amitriptyline for treating major depression with or without melancholia.

Efficacy of hormone therapy with and without methyltestosterone augmentation of venlafaxine in the treatment of postmenopausal depression: A double-blind controlled pilot study

Objective: This study evaluated the augmentation of venlafaxine with hormone therapy in the treatment of postmenopausal depression. The hormones evaluated were estrogen (0.625 mg) in combination with medroxyprogesterone acetate (2.5 mg) and methyltestosterone (2.5 mg). Design: Seventy-two menopausal women (mean age: 53.6 ± 4.27 years) diagnosed with depression (Montgomery-Åsberg Depression Rating Scale [MADRS] scores ≥ 20) were treated with venlafaxine and one of the following hormone therapy combinations, in a double-blind regimen: estrogen + medroxyprogesterone + methyltestosterone (group 1, n = 20); estrogen + medroxyprogesterone acetate (group 2, n = 20); methyltestosterone only (group 3, n = 16); and no hormone therapy (group 4, n = 16). Study duration was 24 weeks. Primary efficacy outcome was remission according to the MADRS, whereas secondary efficacy measures included the Clinical Global Impression (CGI), Blatt-Kupperman Index, and Women's Health Questionnaire (WHQ). Results: Forty-eight patients completed the study. All groups showed significant improvement from baseline. Group 3 demonstrated significant improvement on the MADRS compared with placebo (group 4) at weeks 20 (P = 0.048) and 24 (P = 0.030); effect size 8.04 (0.83; 15.26) (P = 0.029), but also had the highest dropout rate. Groups 1 and 3 had significant CGI improvement rates compared with placebo: 42.23% (P = 0.012) and 44.45% (P = 0.08), respectively. There were no differences in the WHQ or BKI scores among the groups. Conclusions: Methyltestosterone 2.5 mg had the highest effect size compared with placebo, but the high dropout rate prevented its efficacy from being determined. Estrogen plus medroxyprogesterone, combined with methyltestosterone or otherwise, demonstrated a trend toward increased efficacy of venlafaxine. Further larger-scale clinical trials are needed to elucidate the findings of this pilot study. © 2006 by The North American Menopause Society.

Test results of fault current limiter using YBCO tapes with shunt protection

A Fault Current Limiter (FCL) based on high temperature superconducting elements with four tapes in parallel were designed and tested in 220 V line for a fault current peak between 1 kA to 4 kA. The elements employed second generation (2G) HTS tapes of YBCO coated conductor with stainless steel reinforcement. The tapes were electrically connected in parallel with effective length of 0.4 m per element (16 elements connected in series) constituting a single-phase unit. The FCL performance was evaluated through over-current tests and its recovery characteristics under load current were analyzed using optimized value of the shunt protection. The projected limiting ratio achieved a factor higher than 4 during fault of 5 cycles without degradation. Construction details and further test results will be shown in the paper. © 2010 IOP Publishing Ltd.

Portable Hardness tester for timber classification

Hardness is a property largely used in material specifications, mechanical and metallurgical research and quality control of several materials. Specifically for timber, Janka hardness is a simple, quick and easy test, with good correlations with the compression parallel to grain strength, a strong reference in structural classification for this material. More recently, international studies have reported the use of Brinell hardness for timber assessment which resumes the advantages previously mentioned for Janka hardness and make it easier to be performed in the field, especially because of the lower magnitude of the involved loads. A first generation of an equipment for field evaluation of hardness in wood - Portable Hardness tester for wood - based on Brinell hardness has already been developed by the Research Group on Forest Products from FCA/UNESP, Brazil, with very good correlations between the evaluated hardness and several other mechanical properties of the material when performing tests with different species of native and reforested wood (traditionally used as ties - sleepers - in railways). This paper presents results obtained in the experimental program with the first generation of this equipment and preliminary tests with its second generation, which uses accelerometers to substitute the indentation measurements in wood. For the first generation of the equipment functional and calibration tests were carried out using 16 native and reforestation timber lots, among there E. citriodora, E. tereticornis, E. saligna, E. urophylla, E. grandis, Goupia glabra and Bagassa guianenses, with different origins and ages. The results obtained confirm its potential in the classification of specimens, with inclusion errors varying from 4.5% to 16.6%.

Ultra-structural mapping of sugarcane bagasse after oxalic acid fiber expansion (OAFEX) and ethanol production by Candida shehatae and Saccharomyces cerevisiae

Background: Diminishing supplies of fossil fuels and oil spills are rousing to explore the alternative sources of energy that can be produced from non-food/feed-based substrates. Due to its abundance, sugarcane bagasse (SB) could be a model substrate for the second-generation biofuel cellulosic ethanol. However, the efficient bioconversion of SB remains a challenge for the commercial production of cellulosic ethanol. We hypothesized that oxalic-acid-mediated thermochemical pretreatment (OAFEX) would overcome the native recalcitrance of SB by enhancing the cellulase amenability toward the embedded cellulosic microfibrils. Results: OAFEX treatment revealed the solubilization of hemicellulose releasing sugars (12.56 g/l xylose and 1.85 g/l glucose), leaving cellulignin in an accessible form for enzymatic hydrolysis. The highest hydrolytic efficiency (66.51%) of cellulignin was achieved by enzymatic hydrolysis (Celluclast 1.5 L and Novozym 188). The ultrastructure characterization of SB using scanning electron microscopy (SEM), atomic force microscopy (AFM), Raman spectroscopy, Fourier transform-near infrared spectroscopy (FT-NIR), Fourier transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD) revealed structural differences before and after OAFEX treatment with enzymatic hydrolysis. Furthermore, fermentation mediated by C. shehatae UFMG HM52.2 and S. cerevisiae 174 showed fuel ethanol production from detoxified acid (3.2 g/l, yield 0.353 g/g; 0.52 g/l, yield, 0.246 g/g) and enzymatic hydrolysates (4.83 g/l, yield, 0.28 g/g; 6.6 g/l, yield 0.46 g/g). Conclusions: OAFEX treatment revealed marked hemicellulose degradation, improving the cellulases ability to access the cellulignin and release fermentable sugars from the pretreated substrate. The ultrastructure of SB after OAFEX and enzymatic hydrolysis of cellulignin established thorough insights at the molecular level. © 2013 Chandel et al; licensee BioMed Central Ltd.

Evaluation of Rice Bran Extract as a Nitrogen Source for Improved Hemicellulosic Ethanol Production from Sugarcane Bagasse by New Xylose-Fermenting Yeast Strains Isolated from Brazilian Forests

Xylose is the main sugar in hemicellulosic hydrolysates and its fermentation into ethanol by microorganisms is influenced by nutritional factors, such as nitrogen source, vitamins and other elements. Rice bran extract (RBE) is an inexpensive nitrogen source primarily consisting of high amount of protein. This study evaluates the potential of RBE as a nitrogen source for the hemicellulosic ethanol production from sugarcane bagasse dilute acid hydrolysate by novel yeast strains Scheffersomyces shehatae (syn. Candida shehatae) CG8-8BY and Spathaspora arborariae UFMG-HM19.1A, isolated from Brazilian forests. Two different media formulations were used for inoculum preparation and production medium, using yeast extract and RBE as nitrogen sources. S. shehatae CG8-8BY showed ethanol production of 17.0 g/l with the ethanol yield (0.33 g/g) and fermentation efficiency (64 %) from medium supplemented with RBE. On the other hand, S. arborariae presented 5.4 g/l of ethanol production with ethanol yield (0.14 g/g) and fermentation efficiency (21 %) in a fermentation medium supplemented with RBE. Appropriate media formulation is an important parameter to increase the productivity of bioconversion process and RBE proved to be an efficient and inexpensive nitrogen source to supplement sugarcane bagasse hemicellulosic hydrolysate for second generation ethanol production. © 2013 Society for Sugar Research & Promotion.