Estudo comparativo de dois programas de computador (Dolphin Imaging e Nemotec) versus o método manual utilizados para análises cefalométricas de pacientes com deformidade dento-facial padrão II

A-Nperp, Pg-Nperp e mandibular plane). Thirty patients (male or female), with age varying from 19 to 48 years old were analyzed. All patients were diagnosted with mandibular retrognathism and submitted to bilateral sagital mandibular advancement. All tracings were performed in lateral cephalometric radiographs obtained one week before surgery. The intraclass correlation coefficient analysis (ICC), the t test adjusted for Tukey-Kramer test and Schuirmann test were applied. The results showed that the manual tracings and Nemotec® tracing had excellent reliabilities for all measures (ICC > 0.98). The Dolphin Imaging® showed low reliability in anterior facial height (value of ICC = 0.70), Co-A (value of ICC = 0.47) and Co-Gn (ICC value = 0.49). In A-Nperp, Pg-Nperp, Mandibular plan, SNA and SNB there were no differences between the 3 tracings (p > 0.05), for the anterior facial height measures differences were found between the Dolphin Imaging® and Nemotec® tracings, but no differences were observed as compared to the manual tracing (p > 0.05), in Co-A and Co-Gn measures t Dolphin Imaging® presented a significantly lower mean than the other methods (p > 0.05). The manual tracings were equivalent in 6 of 8 measures (A-Nperp, Pg-Nperp, md Plan, SNA, SNB and Co-A), there was no equivalence between the methods in the anterior facial height and Co-Gn measures (p < 0.01). The Dolphin Imaging® method was not equivalent in any of the 8 measures. It was concluded that in the manual tracing only the Co- Gn, Pg-Nperp and SNB measures confirmed the diagnosis of mandibular retrognathism, and the Nemotec® software showed better results than the Dolphin Imaging® software.

Computador: um recurso para o incentivo da leitura nos anos iniciais do ensino fundamental

A presente reflexão motiva-se no seio da crescente discussão sobre a utilização das tecnologias de informação e comunicação na educação, assim como acerca do uso de computadores que permitem o acesso à pesquisa e a informações novas. Este trabalho é decorrência de estudos realizados para a disciplina de monografia de conclusão de curso, e tem como objetivos: verificar o posicionamento de professores sobre o uso do computador como um recurso que estimule a leitura para alunos dos Anos Iniciais do Ensino Fundamental; averiguar o que os professores pensam sobre a inclusão digital; descobrir para qual tipo de leitura o computador é utilizado. Os resultados apresentados são provenientes apenas dos estudos teóricos realizados, visto que fazem parte de um projeto de pesquisa ainda em andamento.

Desenvolvimento de um computador de bordo para veículo Baja-SAE

The objective of this paper is show the development of an Eletronic Control Unit (ECU) for Baja-SAE vehicles from its requirements to final implementation. An ECU for Baja-SAE vehicles is made of electric and electronic circuits (appropriated to the hostile situations of an off-road competition) able to make important measurements for the running or stand-by vehicle performance. For this development, some concepts were studied: embedded electronics concepts (mainly microcontrollers and data acquisition circuits) and sensoring. Both the studies were made considering the off-road environment. After these initial studies, the elaboration of the basics hardware and software (under simulations) has begun, and this elaboration objectives maximum performance and low implementation cost. After the theorical studies, basic definition of the hardware and software’s architectures and simulations, the printed circuit boards (PCB) were made, as exhaustive tests in these boards for debugging and verify if the boards work well. Once the system was tested in the university, it ran into a regional Southeast competition in 2010, that definitely proved the efficiency of the whole system

O uso do computador no processo de ensino e aprendizagem: questões de representação social

This paper presents the results of a study aimed at identifying and analyzing the theoretical and methodological principles that guide the practice of teachers in the early years of computer use in the teaching and learning. Specific objectives we seek to identify and analyze the social representations of teachers on the use of computers in teaching and learning. The research took a qualitative approach with a descriptive-explanatory and owned two phases of data collection: a) a questionnaire b) monitoring the daily practice of teachers in a selected school and semi-structured interview. The analysis of data was done through content analysis. Through the interrelationship of the data in the questionnaire, observation and interview, we found that the teachers surveyed have an address that does not match the teaching practice in the use of computers in the educational process. The theoretical expressed by teachers participating in the research meets constructivist beliefs and / or sociointeractionists but teaching practice thins primarily to behavioral assumptions. Observe social issues of representation when the speeches of the participating teachers did not correspond to their practices. Associated with this or as a cause of these conditions have failure, inadequacy or absence of teacher training for the use of computers in the educational process leading to under-utilization of this resource.

Uma proposta para utilização do computador no processo de ensino e aprendizagem dos primeiros números do sistema hindu-arábico

The aim of this work is presenting the development and the results of a research, which focus of interest has been the making of softwares that could help the process of teaching and learning of the hindu-arabic numerals system, on children in the alphabetical stage. Since the most important presupposes to this work are the development of the number concept according to Jean Piaget (1986-1980) and the reality of the classroom, then three different moments have been fixed: the creation of a beginning scheme of computer activities; the aplication of these activities on children in the alphabetical stage; and, finally, an analysis of the limits and possibilities of these activities while an environment cause of actions that would benefit the process of teaching and learning of the mentioned content. Finally, based on the anlysis of the results obtained, the next step was fixing a more consistant set of computer activities, which makes up a proposal to the use of computer in the process of teaching and learning of the first hindu-arabic numbers

Post-Scriptum. Fernando Henrique Cardoso, Alberto Fujimori y la solución del conflicto con Ecuador

PACARINA DEL SUR - REVISTA DEL PENSAMIENTO CRITICO LATINOAMERICANO é uma publicação eletrônica publicada em Mexico, D.F. É publicada 4 vezes por ano. É uma publicação muito aceita e prestigiada internacionalmente.

Actividad antimicrobiana de la solución de nanopartícula de plata en cultivo de Enterococcus faecalis

Objective. The objective of this study was to evaluate the antimicrobial activity of the silver nanoparticles solution in enterococcus faecallis cultures (ATCC 29212), compared with various solutions of sodium hypoclorithe (NaOCl). Material and methods. Five Agar Petri plates were inoculated with E. faecallis and each of them was placed a cellulose dish embedded with silver nanoparticles solution, or a solution of sodium hypochlorite evaluated (Viarzon, Cloralex, Clorox). Chlorhexidine digluconate 2% was used as positive control and sterile saline solution was used as negative control. After 24 hours of incubation at 37ºc, under aerobic conditions, the zones of inhibition of bacterial growth were measured and the results subjected to the statistical t test among the experimental groups (= 5%). Results. The Cloralex showed to be the most effective reflected in the extent of inhibition in relation to other substances (p< 0.05), except that the chlorhexidine digluconate 2% (p> 0.05). The solution of silver nanoparticles provided a greater zone of inhibition than the sodium hypochlorite solution (Clorox) and Viarzon (p< 0.05). Clorox and Viarzon didn't provide zones of inhibition and were similar to each other (p> 0.05). Conclusions. The solution of silver nanoparticles presents antimicrobial activity in cultured E. faecallis, even higher than other commercial forms of sodium hypochlorite. Further studies should be carried out to determine its viability as irrigating solution in endodontics (AU)

A utilização das tecnologias assistidas por computador como elemento de integração, pesquisa e desenvolvimento nas disciplinas de projeto para a engenharia e design

The use of technologies called computedassisted, such as CAD - (Computed Aided Design), CAM - (Computed Aided Manufacturing) and CNC - (Computed Numerical Control), increasingly demanded by the market, are needed in the teaching of subjects technical drawing and design courses for engineering and design. However its use findl barriers in the more conservative wing of the academy, who advocate the use of traditional drawing, for the settling of the concepts and the development of spatial reasoning. This study aimed to show the results obtained with the design and production of an apparatus for measuring a three-dimensional computer-aided milling machine, interaction, integration and consolidation of concepts, fully demonstrating that the learning of computer-assisted technology is possible, and its use is most appropriate, meaningful and productive, than the use of instruments in the classic design.

A formação continuada, o uso do computador e as aulas de ciências nos anos iniciais do ensino fundamental

The present article aims to discuss a process of continuing education which was focused on Science teaching and computer use considering the school as the locus of training. This process was intended for teachers who taught in the first years of Primary School. The research was developed with a qualitative approach, focusing on participant observation. It was aimed to characterize the educational practices, considering the elaboration of scientific knowledge, the development of experimental activities and the educational possibilities of the Information and Communication Technologies. The results reveal the involvement of the group in an attitude of research and reflection, and the utilization of collective spaces for constant discussion regarding the issues of classroom and teaching action.

Desempenho de movimentos cíclicos e discretos realizados em tarefa de Fitts simulada em computador

Performance of cyclical and discrete movements executed in Fitts’ task simulated by computer Abstract This study compared the performance of cyclical and discrete movements in Fitts’ task simulated by a computer. Twenty male adults, between 25 and 30 years old, participated as volunteers in the study. The software Discrete Aiming Task (v.2.0) simulated the Fitts’ task, in the discrete and cyclical conditions, and provided the movement time (TM). It was manipulated 4 target widths and 3 distances between the targets to provide index of difficulties (ID) from 1 to 6 bits. The ANOVA TWO WAY, 3 (Conditions) x 6 (ID), with repeated measures in the last factor, compared the TM in the different conditions. Regression analysis verified the relationship between TM x ID. There were no significant differences between the conditions; the virtual environment and the mouse were used to explain such results. All movement conditions showed a straight relationship between TM x ID with R²>0.990. Therefore, Fitts’ law showed to be consistent, independently of the movement strategy performed.

Análise e aferição de uma fresadora CNC através da utilização das tecnologias assistidas por computador, no escaneamento 3D de amostras e processamento de imagens

The use of computer-assisted technologies such as CAD - Computed Aided Design, CAM - Computed Aided Manufacturing, CAE - Computed Aided Engineering and CNC - Computed Numerical Control, are priorities in engineering and product designers. However, the dimensional measurement between the virtual and the real product design requires research, and dissemination procedures among its users. This work aims to use these technologies, through analysis and measurement of a CNC milling machine, designed and assembled in the university. Through the use of 3D scanning, and analyzing images of the machined samples, and its original virtual files, it was possible to compare the sizes of these samples in counterposition to the original virtual dimensions, we can state that the distortions between the real and virtual, are within acceptable limits for this type of equipment. As a secondary objective, this work seeks to disseminate and make more accessible the use of these technologies.

Concepção, modelagem, simulação e usinagem de um aerofólio automotivo auxiliado por computador

With the advancement of computer technology and the availability of technology computer aided design (CAD) errors in the designs are getting smaller. To this end the project aims to assess the reliability of the machine (CNC), which was designed by students of mechanical engineering college engineering - UNESP Bauru, by designing, modeling, simulation and machining an airfoil automotive. The profile template selected for the study will be a NACA 0012 machined plates in medium density fiberboard (MDF) and will be performed with a structural analysis simulation using finite elements and a software CFD (Computational Fluid Dynamics), and test the real scale model in a wind tunnel. The results obtained in the wind tunnel and CFD software will be compared to see the error in the machining process.

Programa um computador por aluno: política pública e políticas de subjetivação

Pós-graduação em Desenvolvimento Humano e Tecnologias - IBRC