106 resultados para SAW
Resumo:
Kinetics of the removal of Eucalyptus grandis wood extractives during Kraft pulping. The objective of this work was to study the kinetics of the removal of Eucalyptus grandis wood extractives during Kraft pulping. The pulping was done in steel tubular reactors using wood saw under the following conditions: active alkali = 14%, sulfidity = 25%; liquor-to-wood ratio = 10 L kg(-1) of dry wood; and temperatures of 130, 150, 160 and 180 C during 30, 60, 90, 120, 150 and 180 minutes. After pulping, analyses were conducted of the yield and extractives in residue (pulp and reject). Total extractives (ethyl alcohol-toluene (1:2), ethyl alcohol and hot water, respectively) and soluble extractives in acetone were analyzed. The results showed that most extractives are degraded in the first 30 minutes of the pulping process. It was observed that the removal occurs in two different stages: the first is rapid, where the majority of the extractives are removed, and the last is slow, where few extractives are removed.
Resumo:
Water from dental equipment presents risks for surgeon-dentists as well as for patients because it might work as a means of dissemination/ transmission of microoganisms. The objective of this study was to verify the quality of the water used in dental equipment by means of microbiological analysis, accomplishing the count of Staphylococcus spp.There have been collected, 160 samples of water from reserviors, taps used for hand washing, air-water syringes, and high-speed handpieces, in 40 dental offices in the city of Barretos, São Paulo. The rules concerning bacteriotogicaI analysis in cfu/mL from Standard Methods for the Examination of Water and Wastewater have been followed. The analysis of the results has made it possible to verify that out of the total of samples, 28% did not meet the standards of potability established by the American Dental Association: Regarding the origin of analyzed S. aureus., the most contaminated sites were high-speed handpicces in private offices (761%) and in, ental care plan offices (71%), followed by air-water syringe in dental care plan offices (64%). For S. epidermitis samples, the most contaminated sites were high-speed handpieces in SUS (Brazilian Government Health System) dental offices (22%) and in dental care plan offices (14%) The most contaminated sites were dental offices that saw Patients under dental care plans, Concerning tested antibiotics, the ones that presented better results as to sensibility to strain S. epidermidis were vancomycin and ciprofloxacin (100%) and, as to sensibility to strain S. aureus, it was ciprofloxacin (97%).
Resumo:
The Marsh Antwren (Stymphalornis acutirostris) is restricted to the lowlands between Antonina Bay, in the coastal plain of the state of Paraná, and Itapocu river, in the northern coastal plain of the state of Santa Catarina (from 0 to c. 5 m a.s.l.). It doesn't occur continuously in this region, being found in eight populations that span over an total area of about 6,060 ha (= area of occupancy; 4,856.67 in Paraná and c. 1,200 in Santa Catarina). Nine habitat types used by the Marsh Antwren were defined, based on vegetation physiognomy, localization, dominancy of botanical species, dominant life-form and history of the region. Five of these are herbaceous (marshes), while four have an upper arboreal stratum and an herbaceous lower stratum with marsh plants. According to the classification criteria of the Brazilian vegetation proposed by the Radambrasil Project, they were classified as Pioneering Formation of Fluvial Influence, Pioneering Formation of Fluvial-marine Influence, and/or Pioneering Formation of Lacustrine Influence. They occur as patches or narrow strips ranging from 0.001 to 203.0 ha in the state of Paraná. They are found mainly in the interior of bays, in the lower courses of rivers that drain into bays, in alluvial plains, and between sand dunes in the coastal plain. Characteristic herbaceous species are cattail (Typha domingensis), bulrush (Scirpus californicus), Crinum salsum, Panicum sp. cf. P. mertensii, saw grass (Cladium mariscus) and Fuirena spp. Hibiscus pernambucensis is the characteristic bush species, and Calophyllum brasiliense, Tabebuia cassinoides, Annona glabra and Laguncularia racemosa are the characteristic arboreal species. The Marsh Antwren lives in herbaceous vegetation, but also uses bushes and branches of small tress. It has low flight capacity and a single flight of more than 25 m was never recorded. Territories of 0.25 ha were estimated in one kind of habitat (tidal marsh) (= 8 individuals per hectare) and of 3.2 ha in another one (saw grass marsh) (= 0.62 individual per hectare). The global population estimate is of about 17,700 mature individuals (13,700 in Paraná and 4,000 in Santa Catarina). The species is really under threat of extinction, mainly because of it's restricted geographical distribution and habitat loss by human activities and biological contamination caused by invasion of exotic grasses (Urochloa arrecta and Brachiaria mutica).
Resumo:
Objective. Considering that patients' satisfaction is one of the most important goals in conducting removable dental prosthesis (RDP) therapy and the fact that there are many factors which influence this parameter, the present study aims to evaluate the expectation before and satisfaction after therapy with RDP in patients who seek such therapy. As a secondary objective, other variables that may be associated with patient satisfaction are also evaluated, such as gender, age, Kennedy's classification of the arch supporting the RDP, the number of RDP adjustments after delivery and patients' evaluation of the dentists' conduct. Materials and methods. A sample of 44 patients who received RDP therapy were assigned visual analog scale scores for their expectation before and satisfaction after therapy regarding chewing, aesthetics, comfort and phonetics. They also completed a questionnaire concerning the dentists' conduct. Results. There was no statistically significant difference among scores concerning different genders, age, number of post-delivery settings and arch involved in the RDP. Regarding patients' evaluation of the dentists' conduct, there was a predominance of positive evaluations, but only different answers to the statement (i.e. 'The dentist I saw thoroughly explained the recommended treatment before it commenced') present statistically significant different scores for chewing (p = 0.040) and phonetics (p = 0.046). Conclusions. The average visual analog scale scores were high for both expectation prior to treatment and satisfaction after treatment; however, the scores for expectations were higher than those for satisfaction. © 2013 Informa Healthcare.
Resumo:
Metallic biomaterials are used to reinforce or to restore the form and function of hard tissues. Implants and prosthesis are used to replace shoulders, knees, hips and teeth. When these materials are inserted in bone several biological reactions happen. This process can be associated to surface properties (topography, roughness and surface energy). In this work, the influence of biomimetic surface treatment in the osseointegration of Ti-30Ta dental implants was evaluated. Ingots were obtained from titanium and tantalum by using an arc-melting furnace. They were submitted to heat treatment at 1,100°C for 1 h, cooled in water and cold worked by swaging. Then, screw-shaped implants (2.0 mm diameter by 2.5 mm length) were manufactured and they were implanted in a rat's femur. Animals were divided into two groups: untreated (control group) and treated (biomimetic surface treatment). They were sacrificed 30 days after implantation. For histological analysis, implants with surrounding tissue were removed and immersed in formaldehyde. Samples were embedded in polymethyl methacrylate and after polymerization, cut with a saw, polished and mounted on glass slides. The results obtained suggest that biomimetic surface treatment was able to promote an increase osseointegration on the surface of dental implants. © Springer-Verlag Berlin Heidelberg 2013.
Estratégias para a redução de ciclos da serra no problema de corte de estoque na indústria moveleira
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Pós-graduação em Matemática - IBILCE
Resumo:
Pós-graduação em Estudos Linguísticos - IBILCE
Resumo:
Pós-graduação em Artes - IA
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Pós-graduação em Ciências Sociais - FFC
Resumo:
Pós-graduação em Medicina Veterinária - FMVZ