Allocation of protective devices in distribution circuits using nonlinear programming models and genetic algorithms

The optimized allocation of protective devices in strategic points of the circuit improves the quality of the energy supply and the system reliability index. This paper presents a nonlinear integer programming (NLIP) model with binary variables, to deal with the problem of protective device allocation in the main feeder and all branches of an overhead distribution circuit, to improve the reliability index and to provide customers with service of high quality and reliability. The constraints considered in the problem take into account technical and economical limitations, such as coordination problems of serial protective devices, available equipment, the importance of the feeder and the circuit topology. The use of genetic algorithms (GAs) is proposed to solve this problem, using a binary representation that does (1) or does not (0) show allocation of protective devices (reclosers, sectionalizers and fuses) in predefined points of the circuit. Results are presented for a real circuit (134 busses), with the possibility of protective device allocation in 29 points. Also the ability of the algorithm in finding good solutions while improving significantly the indicators of reliability is shown. (C) 2003 Elsevier B.V. All rights reserved.

Detection and classification of voltage disturbances using a Fuzzy-ARTMAP-wavelet network

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Determination of the optimal quantity of crop residues for energy in sugarcane crop management using linear programming in variety selection and planting strategy

The aim of this work was to present organizational models for optimizing the reduction of crop residue generated by the sugarcane culture. The first model consisted of the selection of varieties of sugarcane to be planted meeting the mill requirements and, at the same time, to minimize the quantity of residue produced. The second model discussed the use of residue to produce energy. This is related to the selection of variety and quantity to be planted, in order to meet the requirements of the mill, to reduce the quantity of residue, and to maximize as much as possible the energy production. The use of linear programming was proposed. The two models presented similar results in this study, and both may be used to define the varieties and areas to be cultivated. (C) 2001 Published by Elsevier B.V. Ltd.

Rooting of healthy and CVC-affected 'Valência' sweet orange stem cuttings, through the use of plant regulators

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Short Comments on an Energy Pumping Levels in a MEMS Gyroscope Vibrating Problem, by Using of an Global and Local Optimal Linear Control Design

This paper deals with an energy pumping that occurs in a (MEMS) Gyroscope nonlinear dynamical system, modeled with a proof mass constrained to move in a plane with two resonant modes, which are nominally orthogonal. The two modes are ideally coupled only by the rotation of the gyro about the plane's normal vector. We also developed a linear optimal control design for reducing the oscillatory movement of the nonlinear systems to a stable point.

On non-linear dynamics and an optimal control synthesis of the action potential of membranes (ideal and non-ideal cases) of the Hodgkin-Huxley (HH) mathematical model

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

EFFECT OF TREATMENT WITH GROWTH-REGULATORS AND SCARIFICATION ON THE TOLERANCE TO WATER-STRESS IN SEEDS OF ORYZA-SATIVA LCVIAC-165

The effect of treatment of seeds of Oryza sativa L. cv. IAC 165 with gibberellic acid, 6-benzyladenine and ethrel on the tolerance to the water stress were analysed. Gibberellic acid had no effect and 6-benzyladenine and ethrel promoted slight increase in the tolerance to water stress, specially in darkness. After scarification, those growth regulator presented no effect. Our results suggest that 6-benzyladenine and ethrel promoted water stress tolerance due to the decrease in the resistance of the seed coat to embryo expansion.

Growth Regulators and KNO3 on Seed Germination of Angelonia salicariifolia

Angelonia salicariifolia is an herbaceous perennial native to Brazil with ornamental potential as garden plant, cut-flower and potted plant. It has blue flowers 1.0 to 1.4 cm long, in 10-30 cm long terminal racemes. In previous studies seeds of A. salicariifolia showed a positive photoblastic behavior under constant temperatures of 10, 15, 20, 25, 30 and 35 degrees C. The present study evaluated the effects of growth regulators (100, 200, 300, 400, 500 mg L-1 of gibberellic acid and 2.25, 11.3, 22.5 mg L-1 of 6-benzylamino-purine) and potassium nitrate (0.2 and 1.0 %) on promoting its seed germination. The experiment was conducted in a completely randomized design with six replications of 25 seeds, for each treatment. Seeds from dehiscent capsules were sown on one layer of filter paper and moistened with growth regulators or KNO3 solutions. Germination was carried out at 25 degrees C +/- 1 degrees C, under continuous light or darkness. Germination (protusion of the radicle) was observed daily for 20 days. In the dark, only gibberellic acid promoted seed germination. The percentage of germination and the speed of germination index at 400 mg L-1 (47.3%; 0.86) and 500 mg L-1 (52.0%; 0.95) were significantly higher compared to 100 mg L-1 (27.8%; 0.38) and 200 mg L-1 (32.3%; 0.49). The mean germination time at 500 mg L-1 (10.0 days) was significantly smaller compared to 100 mg L-1 (11.9 days) and 200 mg L-1 (11.5 days). Under light, treatments did not differ among each other or from the control, except for 22.5 mg L-1 of 6-benzylamino-purine and potassium nitrate (1.0%), which decreased the percentage of germination and the speed of germination index compared to control. The application of growth regulators or potassium nitrate under light condition is not necessary, since these treatments did not improve germination percentage or the speed of germination index.

Effect of powder milling and dopant addition on the current-voltage characteristics of SnO2-based ceramics

Non-linear electrical properties of SnO2-based ceramics were investigated as a function of powder agglomeration condition and as a function of dopant addition. All doped powders presented a single phase, cassiterite, as evidenced by X-ray diffraction analysis. The effect of milling was quite evident, with non-milled powder showing higher agglomerated particle size than milled powder. Cr addition seemed to increase the non-linear coefficient. Cu and Mn rendered dense ceramics, but α values for systems with Mn were higher than for systems with Cu.

Optimal charging of electric vehicles considering constraints of the medium voltage distribution network

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of plant regulators on growth and flowering of 'Meyer' zoysiagrass

This trial aimed to evaluate the effect of sequential applications of different plant regulators over growth and flower rachis emission of 'Meyer' zoysiagrass (Zoysia japonica). The study was conducted on 15-month old green turfgrass under a randomized complete block design with four replications. The following plant regulator and doses were tested: trinexapac-ethyl (113+113, 226+113, 226+226, 452+113, 452+226, 452+452, 678+339 e 904+452 g a.i./ha-1), prohexadione-calcium (100+100 e 200+200 g a.i. ha-1) and bispyribac-sodium (40+40 e 60+60 g a.i. ha-1), as well as an untreated control. The turfgrass was mowed again at 3.0 cm aboveground and the second plant regulator was applied when 'Meyer' zoysiagrass was between 5.0 and 6.0 cm high. The effect of the treatments was visually rated for visual injury, plant height, height and number of flower rachis, and total dry mass production of clippings. Only bispyribac-sodium had visual symptoms of injury on 'Meyer' zoysiagrass, and no intoxication was observed at 28 days after the second application (DAAB). The sequential applications of trinexapac-ethyl, prohexadione-calcium and bispyribac-sodium reduced by more than 80% the total clipping dry mass produced by 'Meyer' zoysiagrass. All the plant regulators tested also showed promising results in reducing the height and emission of rachis, especially when trinexapac-ethyl was applied at the doses 452+452, 678+339 and 904+452 g a.i. ha-1. 'Meyer' zoysiagrass turfgrass can be handled with the sequential application of a plant regulator, which reduces the need for mowing over a period up to 110 days after the application of the second plant regulator, and it also avoids deleterious visual effects over turfgrass.

Singular value analyses of voltage stability on power system considering wind generation variability

Pós-graduação em Engenharia Elétrica - FEIS

Effects of plant regulators on the growth and flowering of Saint Augustine grass plants

The objective of this work was to evaluate the effects of three plant growth inhibitors on the development and emission of floral rachis of Saint Augustine grass [Stenotaphrum secundatum (Walt.) Kuntzel] plants. The study was carried out in a 15 month old lawn with the experimental plots being distributed in accordance with a complete randomized block design with four replications. The treatments consisted of sole application of trinexapac-ethyl (113, 226, 452, 678, and 904 g ai ha(-1)), prohexadione-calcium (100 and 200 g ai ha(-1)), and bispyribac-sodium (40 and 60 g ai ha(-1)) plus a check treatment in which the plants were not submitted to any of the plant growth inhibitors. The effects of those products were evaluated in terms of visual signs of plant intoxication, plant height, emission and height of floral rachises, and chip total dry matter production. All the plant growth inhibitors resulted in visible injury to the plants but these intoxication signs practically disappeared 28 days after the application. Trinexapac-ethyl at the dose of 904 g ai ha(-1) reduced plant height by 59.7%, the emission of floral rachis by 96.4%, and the amount of chip dry matter production by 87.7%. Plant growth inhibitors may reduce the number of times of lawn plants cutting up to 119 days after their application with no harmful effects on the plants visual aspect.

Effect of Fusarium graminearum and infection index on germination and vigor of maize seeds

Patógenos em sementes de milho (Zea mays) causam sérios problemas, como a perda de sua capacidade germinativa. O objetivo do trabalho foi determinar qual o melhor tempo para infecção das sementes de milho com Fusarium graminearum, para posterior avaliação dos danos causados pelo fungo na germinação e vigor das mesmas. As sementes foram colocadas sobre meio de BDA contendo o patógeno e incubadas por 4, 8, 16 e 32 h. Após os respectivos períodos de incubação, estas foram submetidas ao teste de sanidade (papel de filtro), com duas variações, sem e com assepsia superficial, usando hipoclorito de sódio a 1% de cloro ativo, por 3 min. Determinado o melhor tempo para infecção, outras sementes foram infetadas com o patógeno, para realização dos testes de germinação e vigor (envelhecimento acelerado e teste de frio) com uma mistura de sementes sadias (colocadas sobre o meio BDA) e sementes inoculadas, resultando em 0, 20, 40, 60, 80 e 100% de sementes infetadas com o fungo em estudo. Os resultados obtidos mostraram que o período de incubação de 32 h foi suficiente para se obter sementes infetadas. Com relação à germinação, não houve diferenças significativas entre os diferentes níveis de infecção, provavelmente devido ao alto vigor das sementes de milho testadas. Quanto aos testes de vigor, os níveis de infecção diferiram significativamente da testemunha, apesar de não terem diferido entre si.

In vitro Survival of Follicles Collected from Domestic Cats' Ovaries at Different Stages of Oestrous Cycle and Cultured with IGF-1

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)