103 resultados para Intact Kidney
Resumo:
The indications for dialysis in patients with acute kidney injury (AKI), as well as the dose and timing of initiation, remain uncertain. Recent data have suggested that early initiation of renal replacement therapy (RRT) may be associated with decreased mortality but not with the recovery of kidney function. A blood urea nitrogen (BUN) level of 75 mg/dL is a useful indicator for dialysis in asymptomatic patients, but one that is based on studies with limitations. Different parameters, including absolute and relative indicators, are needed. Currently, nephrologists should consider the trajectory of disease, and the clinical condition and prognosis of the patient are more important than numerical values in the decision to initiate dialysis.
Continuous peritoneal dialysis compared with daily hemodialysis in patients with acute kidney injury
Resumo:
Background: In some parts of the world, peritoneal dialysis is widely used for renal replacement therapy (RRT) in acute kidney injury (AKI), despite concerns about its inadequacy. It has been replaced in recent years by hemodialysis and, most recently, by continuous venovenous therapies. We performed a prospective study to determine the effect of continuous peritoneal dialysis (CPD), as compared with daily hemodialysis (dHD), on survival among patients with AKI.Methods: A total of 120 patients with acute tubular necrosis (ATN) were assigned to receive CPD or dHD in a tertiary-care university hospital. The primary endpoint was hospital survival rate; renal function recovery and metabolic, acid-base, and fluid controls were secondary endpoints.Results: of the 120 patients, 60 were treated with CPD (G1) and 60 with dHD (G2). The two groups were similar at the start of RRT with respect to age (64.2 +/- 19.8 years vs 62.5 +/- 21.2 years), sex (men: 72% vs 66%), sepsis (42% vs 47%), shock (61% vs 63%), severity of AKI [Acute Tubular Necrosis Individual Severity Score (ATNISS): 0.68 +/- 0.2 vs 0.66 +/- 0.22; Acute Physiology and Chronic Health Evaluation (APACHE) II: 26.9 +/- 8.9 vs 24.1 +/- 8.2], pre-dialysis blood urea nitrogen [BUN (116.4 +/- 33.6 mg/dL vs 112.6 +/- 36.8 mg/dL)], and creatinine (5.85 +/- 1.9 mg/dL vs 5.95 +/- 1.4 mg/dL). In G1, weekly delivered Kt/V was 3.59 +/- 0.61, and in G2, it was 4.76 +/- 0.65 (p < 0.01). The two groups were similar in metabolic and acid-base control (after 4 sessions, BUN < 55 mg/dL: 46 +/- 18.7 mg/dL vs 52 +/- 18.2 mg/dL; pH: 7.41 vs 7.38; bicarbonate: 22.8 +/- 8.9 mEq/L vs 22.2 +/- 7.1 mEq/L). Duration of therapy was longer in G2 (5.5 days vs 7.5 days; p = 0.02). Despite the delivery of different dialysis methods and doses, the survival rate did not differ between the groups (58% in G1 vs 52% in G2), and recovery of renal function was similar (28% vs 26%).Conclusion: High doses of CPD provided appropriate metabolic and pH control, with a rate of survival and recovery of renal function similar to that seen with dHD. Therefore, CPD can be considered an alternative to other forms of RRT in AKI.
Resumo:
Background and objectives Peritoneal dialysis is still used for AKI in developing countries despite concerns about its limitations. The objective of this study was to explore the role of high-volume peritoneal dialysis in AM patients in relation to metabolic and fluid control, outcome, and risk factors associated with death.Design, setting, participants, & measurements A prospective study was performed on 204 AKI patients who were assigned to high-volume peritoneal dialysis (prescribed Kt/V=0.60/session) by flexible catheter and cycler; 150 patients (80.2%) were included in the final analysis.Results Mean age was 63.8 +/- 15.8 years, 70% of patients were in the intensive care unit, and sepsis was the main etiology of AKI (54.7%). BUN and creatinine levels stabilized after four sessions at around 50 and 4 mg/dl, respectively. Fluid removal and nitrogen balance increased progressively and stabilized around 1200 ml and -1 g/d after four sessions, respectively. Weekly delivered Kt/V was 3.5 +/- 0.68. Regarding AKI outcome, 23% of patients presented renal function recovery, 6.6% of patients remained on dialysis after 30 days, and 57.3% of patients died. Age and sepsis were identified as risk factors for death. In urine output, increase of 1 g in nitrogen balance and increase of 500 ml in ultrafiltration after three sessions were identified as protective factors.Conclusions High-volume peritoneal dialysis is effective for a selected AKI patient group, allowing adequate metabolic and fluid control. Age, sepsis, and urine output as well as nitrogen balance and ultrafiltration after three high-volume peritoneal dialysis sessions were associated significantly with death. Clin J Am Soc Nephrol 7: 887-894, 2012. doi: 10.2215/CJN.11131111
Resumo:
Background. Patients who develop acute kidney injury (AKI) in the intensive care unit (ICU) have extremely high rates of mortality and morbidity. The objectives of this study were to compare clinical and laboratory characteristics of AKI patients evaluated and not evaluated by nephrologists in ICU and generate the hypothesis of the relationship between timing of nephrology consultation and outcome.Methods. We explored associations among presence and timing of nephrology consultation with ICU stay and in-ICU mortality in 148 ICU patients with AKI at a Brazilian teaching hospital from July 2008 to May 2010. Multivariable logistic regression was used to adjust confounding and selection bias.Results. AKI incidence was 30% and 52% of these AKI patients were evaluated by nephrologists. At multivariable analysis, AKI patients evaluated by nephrologists showed higher Acute Tubular Necrosis-Index Specific Score and creatinine level, more dialysis indications, lower urine output and longer ICU stay. The mortality rate was similar to AKI patients who were not evaluated. Nephrology consultation was delayed (>= 48 h) in 62.3% (median time to consultation, 4.7 days). Lower serum creatinine levels (P - 0.009) and higher urine output (P = 0.002) were associated with delayed consultation. Delayed consultation was associated with increased ICU mortality (65.4 versus 88.2%, P < 0.001).Conclusions. In AKI, patients evaluated by nephrologists seem to be more seriously ill than those not evaluated and present similar mortality rate. The delayed nephrology consultation can be associated with increased ICU mortality.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fluoride has been widely used in dentistry as a caries prophylactic agent. However, there has been some speculation that excess fluoride could cause an impact on genome integrity. In the current study, the potential DNA damage associated with exposure to fluoride was assessed in cells of blood, liver, kidney, thyroid gland and urinary bladder by the single cell gel (comet) assay. Male Wistar rats aging 75 days were distributed into seven groups: Groups 1 (control), 2, 3, 4, 5, 6 and 7 received 0 (deionized water), 10, 20, 40, 60, 80 and 100 mgF/Kg body weight from sodium fluoride (NaF), respectively, by gastrogavage. These groups were killed at 2 h after the administration of the fluoride doses. The level of DNA strand breaks did not increase in all organs evaluated and at all doses of NaF tested, as depicted by the mean tail moment. Taken together, our results suggest that oral exposure to NaF did not result in systemic genotoxic effect in multiple organs related to fluoride toxicity. Since DNA damage is an important step in events leading to carcinogenesis, this study represents a relevant contribution to the correct evaluation of the potential health risk associated with chemical exposure.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Statement of problem. Microwave irradiation has been suggested as a method to disinfect denture bases. However, the effect of microwave heating on the dimensional stability of the relined denture bases is unknown.Purpose. The purpose of this study was to evaluate the dimensional stability of intact and relined acrylic resin denture bases after microwave disinfection.Material and methods. A standard brass cast simulating an edentulous maxillary arch was machined and used to fabricate 2- and 4-mm-thick denture bases (n=200), which were processed with heat-polymerized acrylic resin (Lucitone 550). The 2-mm thick-specimens (n=160) were relined with 2 mm of autopolymerizing resin (Tokuso Rebase Fast, Ufi Gel Hard, Kooliner, or New Truliner). Distances between 5 removable pins on the standard brass cast were measured with a Nikon optical comparator, and the area (mm(2)) formed by the distance between 5 pins was calculated and served as baseline. During fabrication, the pins were transferred to the intaglio surface of the specimens. Differences between the baseline area and those subsequently determined for the specimens were used to calculate the percent dimensional changes. The intact and relined denture bases were divided into 4 groups (n=10) and evaluated after: polymerization (control group P); 1 cycle of microwave disinfection (MW); daily microwave disinfection for 7 days (control group MW7); water storage for 7 days (WS7). Microwave irradiation was performed for 6 minutes at 650 W. Data were analyzed using 2-way ANOVA followed by Tukey's test (alpha=.05).Results. Intact specimens and those relined with Kooliner and New Truliner showed increased shrinkage after 1 (P=.05, .018, and .001, respectively) and 7 (P <.001, .003, and <.001, respectively) cycles of microwave disinfection. With the exception of specimens relined with Kooliner, intact specimens showed greater shrinkage than the relined specimens after 7 cycles of microwave disinfection.Conclusions. Microwave disinfection produced increased shrinkage of intact specimens and those relined with New Truliner and Kooliner.
Resumo:
Statement of problem. Denture bases may become increasingly weaker as a result of thermal stress and flexural cyclic loading. Information regarding this potential problem and its relationship to the denture base reline is limited.Purpose. This study evaluated the influence of thermal and mechanical stresses on the strength of intact and relined denture bases.Material and methods. Twenty-eight microwave-polymerized (Acron MC) intact denture bases were prepared in the shape of a 3-mm-thick maxillary denture. Additionally, fifty-six 2-mm-thick denture bases were relined with 1 mm of autopolymerizing resin (Tokuyama Rebase Fast II or New Truliner) (n = 28). Intact and relined specimens were divided into 4 groups (n = 7) as follows: without stress (control); a mechanical stress at 0.8 Hz for 10,000 cycles; 5000 thermal cycles between 5 degrees C and 55 degrees C; or a combination thermo-mechanical stress. The specimens were vertically loaded in compression with a rounded rod at 5 mm/min until failure, using a universal testing machine. Data on maximum fracture load (N), deflection at fracture (%), and fracture energy (N-mm) were analyzed by 2-way analysis of variance and Student-Newman-Keuls tests (alpha = .05).Results. The strength of the denture bases relined with New Truliner was not significantly affected by any of the experimental conditions, but comparing the control groups, New Truliner exhibited the lowest maximum fracture load values. The maximum fracture load of intact denture bases (P = .002) and those relined with Tokuyama Rebase Fast II (P = .01) showed a significant decrease after thermal stress. Additionally, cyclic loading significantly decreased the maximum fracture load (P < .001), deflection at fracture (P = .025), and fracture energy (P < .001) of intact denture bases and those relined with Tokuyama Rebase (P values of .002, .039, and .001, respectively).Conclusion. Thermal and mechanical stresses exert deleterious effects on the strength of intact and/or relined denture bases, which vary according to the relining material used.