Comparative Study of the Mechanical Resistance of 2 Separate Plates and 2 Overlaid Plates Used in the Fixation of the Mandibular Condyle: An In Vitro Study

Purpose: The objective of this study was to carry out a comparative evaluation of the mechanical resistance of 2 rigid internal fixation techniques for fractures of the mandibular condyle using miniplates.Materials and Methods: Fort), polyurethane resin replicas of human hemimandibles were used. The hemimandibles were sectioned to simulate a high subcondylar fracture and then stabilized with 2 fixing techniques using 2.0-mm system plates and screws. The fixation techniques were 2 separate 4-hole plates with 8 screws, and 2 overlaid 4-hole plates with 4 screws. Each system was submitted to load tests, with the application of the load in mediolateral and anteroposterior directions in an Instron 4411 universal assay machine (Instron, Norwood, MA).Results: Load values and peak displacement were measured. Means and standard deviations were evaluated by analysis of variance (P < .05) and Tukey tests, in which it was verified that the anteroposterior peak load value was affected by the arrangement of the plates on the models, although no differences were observed between the groups for the mediolateral peak load. The arrangement of the plates did not have any influence on peak displacement. Similarly, the final value of the mediolateral load was not affected by the arrangement of the plates on the model.Conclusion: The experimental model with 2 separate plates was statistically superior to the model with 2 overlaid plates only in relation to anteroposterior peak load. Despite showing superiority in mediolateral peak load and peak displacement, there was no statistical difference between the groups for these parameters. (C) 2009 American Association of Oral and Maxillofacial Surgeons

Chemical, spectroscopic characterization, and in vitro antibacterial studies of a new gold(I) complex with N-acetyl-L-cysteine

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação de diferentes sistemas de cultivo in vitro para a micropropagação de Psychotria ipecacuanha (Brot.) Stokes

This work was carried out with Psychotria ipecacuanha, a Brazilian medicinal plant the roots of which contain emetine. The main objective was to develop a protocol for the micro-propagation of these species, by testing different culture techniques, the temporary immersion system, and the semi-solid and liquid media systems. In the semi-solid system, experiments were developed in flasks of two different sizes containing MS, B5, and WP media to which were added different growth regulators. Innoculum density was also evaluated. The liquid medium system consisted of MS medium supplemented with different growth regulators. For the temporary immersion system, the MS medium received an addition of 1.5mg/L BAP and 0.5mg/L GA3, and a reverse digital apparatus and vacuum pump were used. The liquid medium system with MS medium supplemented with 1.5mg/L BAP and 0.5mg/L GA3 presented the best results for shoot proliferation in a period of 30 days in culture (2.37 ± 0.32 shoots/explant). Cultures carried out for 90 days in the semi-solid system, using 8.5 × 5.5cm flasks and 3 explants per flask, developed 1.80 ± 0.20 shoots/explant, achieving 3.06 ± 0.51 cm of height adn presented superior survival ratio (96%). Explants cultured in temporary immersion system for 90 days showed 2.30 ± 1.10 shoots/explant achieving a growth of 2.08 ± 0.12 cm and 52% survival.

LH Response (in vivo and in vitro) to an LHRH Agonist Administered to Domestic Male Cats

We investigated plasma luteinizing hormone (LH) concentration in domestic male cats challenged with Luteinizing Hormone Releasing Hormone Analog (LHRH-A) [des Gly10, (DTrp6)-LHRH ethylamide] that mediates the function of the hypothalamic-piruitary-gonadal axis (HPG). Plasma LH concentrations in cats treated daily with LHRH (10 μg/ 100 μl/kg/day, subcutaneously - sc) for 19 days (LHRH group) and in controls treated with saline (NaCl - 0.9%, same volume - SAL group) were chronically studied. LHRH administration (sc) for 15 days induced a significant fall (P < 0.05) in plasma LH concentrations during the chronic study. After the 15th day of treatment the groups were divided once more into animals treated with LHRH (10 μg/100 μl/kg) or saline (iv), and a time course study (300 min) was performed (acute study). Next, four groups of cats were compared in an acute study involving the sc/iv administration of SAL/SAL, SAL/LHRH, LHRH/SAL, and LHRH/LHRH. The responses of the SAL animals challenged by acute iv administration of LHRH (group SAL/LHRH) were significantly higher (P < 0.01) than those of animals treated with LHRH (sc) (group LHRH/LHRH). LH release was also significantly increased in the latter group (P < 0.05), although the effect was short lasting, being recorded only at the first observation (45 min). An in vitro study with the pituitaries was also performed on day 20. Mean (±SEM) LH concentrations in the culture medium containing pituitaries with LHRH (10-7 M) or saline were determined. In vitro analysis of these pituitaries demonstrated a significantly reduced response (P < 0.05) by animals treated sc with LHRH for 19 days. This study represents a source of data for the domestic cat going beyond its own physiology. Serving as a model, this animal provide important information for the study of reproductive physiology in other members of its family (Felidae), almost all of them threatened with extinction.

Influence of cavity preparation and curing method on the marginal seal of resin composite restorations: an in vitro evaluation.

OBJECTIVE: To evaluate the influence of cavity design and photocuring method on the marginal seal of resin composite restorations. METHOD AND MATERIALS: Seventy-two bovine teeth were divided into 2 groups: group 1 received box-type cavity preparations, and group 2 received plate-type preparations. Each group was divided into 3 subgroups. After etching and bonding, Z250 resin composite (3M Espe) was applied in 2 equal increments and cured with 1 of 3 techniques: (1) conventional curing for 30 seconds at 650 mW/cm2; (2) 2-step photocuring, in which the first step was performed 14 mm from the restoration for 10 seconds at 180 mW/cm2 and the second step was performed in direct contact for 20 seconds at 650 mW/cm2; or (3) progressive curing using Jetlite 4000 (J. Morita) for 8 seconds at 125 mW/cm2 and then 22 seconds at 125 mW/cm2 up to 500 mW/cm2. The specimens were thermocycled for 500 cycles and then submitted to dye penetration with a 50% silver nitrate solution. Microleakage was assessed using a stereomicroscope. Data were analyzed using analysis of variance and Tukey test (5% level of significance). RESULTS: A statistically significant difference was found between groups when a double interaction between photocuring and cavity preparation was considered (P = .029). CONCLUSIONS: No one type of cavity preparation or photocuring method prevented micro-leakage. The plate-type preparation showed the worst dye penetration when conventional and progressive photocuring methods were used. The best results were found using the 2-step photocuring with the plate-type preparation.

In vitro evaluation of the precision of working casts for implant-supported restoration with multiple abutments

Objective: The purpose of this study was to compare the accuracy of two working cast fabrication techniques using strain-gauge analysis. Methods: Two working cast fabrication methods were evaluated. Based on a master model, 20 working casts were fabricated by means of an indirect impression technique using polyether after splinting the square transfer copings with acrylic resin. Specimens were assigned to 2 groups (n=10): Group A (GA): type IV dental stone was poured around the abutment analogs in the conventional way; Group B (GB), the dental stone was poured in two stages. Spacers were used over the abutment analogs (rubber tubes) and type IV dental stone was poured around the abutment analogs in the conventional way. After the stone had hardened completely, the spacers were removed and more stone was inserted in the spaces created. Six strain-gauges (Excel Ltd.), positioned in a cast bar, which was dimensionally accurate (perfect fit) to the master model, recorded the microstrains generated by each specimen. Data were analyzed statistically by the variance analysis (ANOVA) and Tukey's test (α= 5%). Results: The microstrain values (με) were (mean±SD): GA: 263.7±109.07με, and GB: 193.73±78.83με. Conclusion: There was no statistical difference between the two methods studied.

In vitro evaluation of surface roughness of 4 resin composites after the toothbrushing process and methods to recover superficial smoothness.

OBJECTIVE: This study evaluated the efficiency of repolishing, sealing with surface sealant, and the joining of both in decreasing the surface roughness of resin-based composites after a toothbrushing process. METHOD AND MATERIALS: Ten specimens of each composite (Alert, Z100, Definite, and Prodigy Condensable), measuring 2 mm in thickness and 4 mm in diameter, were made and submitted to finishing and polishing processes on both sides of the specimens using the Sof-Lex system. The specimens were then subjected to toothbrushing (30,000 cycles), and surface roughness (Ra) was analyzed with a Surfcorder SE 1700 profilometer. The upper surface of each composite was etched with 37% phosphoric acid, and the surface-penetrating sealant Protect-it was applied on 1 surface. The roughness of these surfaces was again measured. On the other side, the surface of the specimen was repolished, and the efficiency of this procedure was measured using the profilometer. The surface roughness resulting from the joining of the 2 methods was verified by applying, in the final stage, the surface-penetrating sealant on the repolished surface. Data were analyzed with analysis of variance and Tukey test (P <.05). RESULTS: Results showed that the lowest surface roughness values were obtained for Definite, Z100, and Prodigy Condensable after the repolishing process and after the repolishing plus sealing. For Alert, the joining of repolishing plus sealing promoted the lowest values of surface roughness. CONCLUSION: Of the resin-based composites, Alert demonstrated the highest values of surface roughness in all the techniques tested.

In vitro effect of low-level laser therapy on typical oral microbial biofilms

The aim of this study was to evaluate the effect of specific parameters of low-level laser therapy (LLLT) on biofilms formed by Streptococcus mutans, Candida albicans or an association of both species. Single and dual-species biofilms - SSB and DSB - were exposed to laser doses of 5, 10 or 20 J/cm 2 from a near infrared InGaAsP diode laser prototype (LASERTable; 780 ± 3 nm, 0.04 W). After irradiation, the analysis of biobilm viability (MTT assay), biofilm growth (cfu/mL) and cell morphology (SEM) showed that LLLT reduced cell viability as well as the growth of biofilms. The response of S. mutans (SSB) to irradiation was similar for all laser doses and the biofilm growth was dose dependent. However, when associated with C. albicans (DSB), S. mutans was resistant to LLLT. For C. albicans, the association with S. mutans (DSB) caused a significant decrease in biofilm growth in a dose-dependent fashion. The morphology of the microorganisms in the SSB was not altered by LLLT, while the association of microbial species (DSB) promoted a reduction in the formation of C. albicans hyphae. LLLT had an inhibitory effect on the microorganisms, and this capacity can be altered according to the interactions between different microbial species.

In vitro susceptibility of oral Candida albicans strains to different pH levels and calcium hydroxide saturated aqueous solution

Candida albicans is present in the oral cavity and in the whole digestive tract of humans and other animals, being frequently related to endodontic treatment failure. The present study determined the incidence of C. albicans in the oral cavity and the susceptibility of isolates to different pH values and saturated calcium hydroxide aqueous solution at pH 12.5. Sixty-five patients attending the Endodontic Clinic at the Sagrado Coração University participated in the study. The collected samples were cultivated in selective media for C. albicans and the isolates were tested in terms of resistance to both alkaline pH and saturated aqueous solution of calcium hydroxide. In relation to time variables, yeast viability was assessed by the Sabouraud's agar culture and fluorescein diacetate and ethidium bromide fluorescent staining method. Results from the different pHs and experimental times, including those from different techniques measuring fungal viability, were compared using the chi-square and Fisher's exact tests (α=0.05). The yeasts became completely inviable after 48 h of contact with the calcium hydroxide solution. On the other hand, when exposed to the alkaline culture broth, the yeasts were found to be viable at pHs 9.5 and 10.5 for up to 7 days. In conclusion, C. albicans can only be completely inhibited by direct contact with saturated calcium hydroxide aqueous solution after 48 h of exposure.

Supplementation with the histone deacetylase inhibitor trichostatin A during in vitro culture of bovine embryos

Summary Trichostatin A (TSA) is a histone deacetylase inhibitor that induces histone hyperacetylation and increases gene expression levels. The aim of the present study was to establish a suitable condition for the use of TSA in in vitro cultures of bovine embryos, and to determine whether TSA would increase blastocyst rates by improvement of chromatin remodelling during embryonic genome activation and by increasing the expression of crucial genes during early development. To test this hypothesis, 8-cell embryos were exposed to four concentrations of TSA for different periods of time to establish adequate protocols. In a second experiment, three experimental groups were selected for the evaluation of embryo quality based on the following parameters: apoptosis, total cell number and blastocyst hatching. TSA promoted embryonic arrest and degeneration at concentrations of 15, 25 and 50 nM. All treated groups presented lower blastocyst rates. Exposure of embryos to 5 nM for 144 h and to 15 nM for 48 h decreased blastocyst hatching. However, the terminal deoxynucleotidyl transferase-mediated dUTP nick-end labeling assay (TUNEL) assay revealed similar apoptosis rates and total cell numbers in all groups studied. Although, in the present study, TSA treatment did not improve the parameters studied, the results provided background information on TSA supplementation during in vitro culture of bovine embryos and showed that embryo quality was apparently not affected, despite a decrease in blastocyst rate after exposure to TSA. © Cambridge University Press 2011.

In vitro biomechanical evaluation of sagittal split osteotomy fixation with a specifically designed miniplate

Recent studies have evaluated many methods of internal fixation for sagittal split ramus osteotomy (SSRO), aiming to increase stability of the bone segments while minimizing condylar displacement. The purpose of this study was to evaluate, through biomechanical testing, the stability of the fixation comparing a specially designed bone plate to other two commonly used methods. Thirty hemimandibles were separated into three equal groups. All specimens received SSRO. In Group I the osteotomies were fixed with three 15 mm bicortical positional screws in an inverted-L pattern with an insertion angle of 90°. In Group II, fixation was carried out with a four-hole straight plate and four 6 mm monocortical screws. In Group III, fixation was performed with an adjustable sagittal plate and eight 6 mm monocortical screws. Hemimandibles were submitted to vertical compressive loads, by a mechanical testing unit. Averages and standard deviations were submitted to analysis of variance using the Tukey test with a 5% level of significance. Bicortical screws presented the greatest values of loading resistance. The adjustable miniplate demonstrated 60% lower resistance compared to bicortical screws. Group II presented on average 40% less resistant to the axial loading. © 2012 International Association of Oral and Maxillofacial Surgeons.

Acupuntura: Um auxílio efetivo em procedimentos de fertilização in vitro?

The purpose of the present study was to evaluate the impact of acupuncture on in vitro fertilization outcomes of patients undergoing acupuncture during embryo transfer. A retrospective study was realized with records of 30 patients undergoing acupuncture and 108 patients not undergoing acupuncture during embryo transfer. The data was compared to verify the differences onto fertilization, embryo cleavage, pregnancy and abortion rate. To the statistical evaluation the X2 Test was performed, set as significant p<0.05. There was no statistical significance difference in any feature analyzed among the groups, although the acupuncture group presented higher pregnancy rate and lower abortion rate. Acupuncture did not presented positive or negative statistical relevant effects into the outcomes of in vitro fertilization procedures. Regardless this result, the present study did not exclude the possibility of acupuncture administration as a tool to pain relief during other procedures, as the transvaginal ultrasound-guided oocyte retrieval. © Todos os direitos reservados a.

Estudo in vitro das alterações na superfície do titânio comercialmente puro e da liga de titânio Ti -6Al-4V submetida a diferentes tratamentos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação comparativa in vitro da rugosidade superficial de resinas compostas submetidas a diferentes técnicas de polimento

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação in vitro da citotoxicidade e genotoxicidade de diferentes cimentos endodônticos em fibroblastos V79

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)