Modified LPE system used to diffuse Cd to obtain InSb infrared detectors

We are presenting here p/n junctions obtained with a modified opened liquid-phase epitaxy (LPE) system, used to diffuse indium antimonide (InSb) doped with Cd over InSb doped with Te wafers, in order to make InSb infrared (IR) sensors. This technique has several advantages: the diffusion can be performed in bigger substrate areas improving the device production; this method decreases the device manipulation, decreasing human mistakes and increasing the process reproducibility. The opened LPE in this work produced sensors in the first case with vapor of the diffusion material, coming from a microholed carbon boat full of the diffusion material, over which is positioned the substrate at atmospheric pressure. In the second, the diffusion material is on the bottom of a quartz recipient, and the InSb/Te wafer works as its cover, and vacuum was used. The IR sensors produced with the first method measured 8.9 x 10(7) cm Hz(1/2)/W as detectivity value and higher IR spectral response at 4.6 mu m, and those produced with the second 2.8 x 10(9) cm Hz(1/2)/W, at 4.4 mu m. Besides the electrical-optical properties, the structural properties of diffused layers were investigated by X-ray diffraction (XRD), scanning electron and atomic force microscopy (SEM, AFM), energy-dispersive and secondary ion mass spectroscopy (EDS, SIMS). (C) 2007 Elsevier B.V. All rights reserved.

Avrami exponent of crystallization in tellurite glasses

Nucleation process and crystal growth for three samples of the (20-x)Li(2)O-80TeO(2)-xWO(3) glass system were studied using X-ray diffraction and differential scanning calorimetry techniques. X-ray diffraction data confirmed the amorphous characteristic of the as-quenched samples and indicated the growth of crystalline phases formed due to the thermal treatment for annealed samples. These results reveal the presence of three distinct gamma-TeO(2), alpha-TeO(2) and alpha-Li(2)Te(2)O(5) crystalline phases in the TL sample, and two distinct alpha-TeO(2) and gamma-TeO(2) crystalline phases in the TLW5 and TLW10 samples. The activation energy and the Avrami exponent were determined from DSC measurements. The activation energy values X-ray diffraction data of the TLW10 glass sample suggest that gamma-TeO(2) phase occur before the alpha-TeO(2). The results obtained for the Avrami exponent point to that the nucleation process is volumetric and that the crystal growth is two or three-dimensional.

Critical points in logistic growth curves and treatment comparisons

Several biological phenomena have a behavior over time mathematically characterized by a strong increasing function in the early stages of development, then by a less pronounced growth, sometimes showing stability. The separation between these phases is very important to the researcher, since the maintenance of a less productive phase results in uneconomical activity. In this report we present methods of determining critical points in logistic functions that separate the early stages of growth from the asymptotic phase, with the aim of establishing a stopping critical point in the growth and on this basis determine differences in treatments. The logistic growth model is fitted to experimental data of imbibition of arariba seeds (Centrolobium tomentosum). To determine stopping critical points the following methods were used: i) accelerating growth function, ii) tangent at the inflection point, iii) segmented regression; iv) modified segmented regression; v) non-significant difference; and vi) non-significant difference by simulation. The analysis of variance of the abscissas and ordinates of the breakpoints was performed with the objective of comparing treatments and methods used to determine the critical points. The methods of segmented regression and of the tangent at the inflection point lead to early stopping points, in comparison with other methods, with proportions ordinate/asymptote lower than 0.90. The non-significant difference method by simulation had higher values of abscissas for stopping point, with an average proportion ordinate/asymptote equal to 0.986. An intermediate proportion of 0.908 was observed for the acceleration function method.

The influence of initial feeding on muscle development and growth in pacu Piaractus mesopotamicus larvae

The effects of different feeding schemes on pacu Piaractus mesopotamicus early development were evaluated with respect to growth, survival, muscle development, and differential gene expression of MyoD and myogenin. The pacu larvae (4 days post hatch-dph, 0.77 mg wet weight) were given six feeding treatments intentionally designed to cause variations in the larvae growth rate: (A) only artemia nauplii; (CD) only a commercial diet; (ED) only a semi-purified experimental diet; (ACD) and (AED) two treatments that involved weaning; and (S) starvation. Early weaning from artemia nauplii to the formulated diets (ACD and AED) affected growth and survival of the pacu larvae compared with the exclusive use of artemia (A). Starvation (S) and the commercial diet (CD) caused total mortality in pacu larvae at 18 dph. The experimental diet (ED) assured low fish survival and growth. The skeletal muscle morphology was not affected by the delay in somatic growth from early weaning onto the formulated diets. Three distinct muscle compartments were observed throughout the larval development in treatments A, ACD and AED: superficial, deep and intermediate, accompanied by muscle thickening. Severe undernourishment caused drastic differences in growth and in the morphology of the muscle fibers. Pacu larvae fed only formulated diets (CD and ED) showed muscle characteristics similar to the larvae in starvation (S) during the first 15 dph. At 27 and 35 dph, a slight increase in epaxial muscle mass was noted in larvae fed only the experimental diet (ED). At 35 dph, we observed a high frequency of fibers >= 40 mu m in the larvae that were weaned onto the formulated diets (ACD and AED), indicative of hypertrophy. In contrast, the larvae fed only artemia nauplii (A) displayed a larger number of fibers with diameters <= 20 mu m, which is indicative of hyperplasia. The expression of the MyoD and myogenin genes in pacu larvae at 35 dph was not affected by initial feeding (p>0.05). In conclusion, the formulated diets used impaired pacu larvae growth and survival; therefore, they were inadequate for pacu, at least at the times they were introduced. Artemia nauplii were the most adequate food source during first feeding of the pacu, and they produced bigger fish upon completion of the experiment. Moreover, the contribution of hyperplasia to the skeletal muscle growth appeared higher in fast- than in slow-growing pacu larvae. (C) 2011 Elsevier By. All rights reserved.

Photoluminescence properties of PZT 52/48 synthesized by microwave hydrothermal method using PVA with template

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The effect of cooling rate during hydrothermal synthesis of ZnO nanorods

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Microwave-hydrothermal synthesis of perovskite bismuth ferrite nanoparticles

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Synthesis of Fine Micro-sized BaZrO3 Powders Based on a Decaoctahedron Shape by the Microwave-Assisted Hydrothermal Method

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Electronic structure, growth mechanism and photoluminescence of CaWO4 crystals

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Novel Aspects of the Purpose-Built Materials Strategy: Evidence of Topographic Template Effect and Oriented Attachment Growth Mechanism

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Growth kinetics of tin oxide nanocrystals in colloidal suspensions under hydrothermal conditions

Colloidal suspensions of tin oxide nanocrystals were synthesized at room temperature by the hydrolysis reaction of tin chloride (II), in an ethanolic solution. The coarsening kinetics of such nanocrystals was studied by submitting the as-prepared suspensions to hydrothermal treatments at temperatures of 100, 150 and 200 degrees C for periods between 60 and 12,000 min. Transmission electron microscopy (TEM) was used to characterize the samples (i.e. distribution of nanocrystal size, average particle radius and morphology). The results show that the usual Ostwald ripening coarsening mechanism does not fit well the experimental data, which is an indicative that this process is not significant for SnO2 nanocrystals, in the studied experimental conditions. The morphology evolution of the nanocrystals upon hydrothermal treatment indicates that growth by oriented attachment (OA) should be significant. A kinetic model that describes OA growth is successfully applied to fit the data. (c) 2006 Elsevier B.V. All rights reserved.

Stereological study of acinar growth in the rat parotid gland induced by isoproterenol

The growth of the rat parotid gland induced by daily treatment with isoproterenol (IPR) for 2 weeks was investigated by stereological methods applied to light microscopy. After 7 days of treatment, the glandular mass presented a 286% growth, with the first 3 days being the period of greatest growth. Total acinar volume exhibited a 363% increase during the period from 0 to 7 days, while acinar-cell volume presented a 468% growth from 0 to 5 days of treatment. on the other hand, total acinar-cell number did not increase during the study period. Thus, under the conditions used, IPR-stimulated gland growth wits essentially hypertrophic. However, a significant increase in the number of bipolar and multipolar mitoses was also observed, especially on the third and fifth days of treatment. As no increase in acinar-cell number occurred during growth, the presence of these mitoses suggests that cell death occurred during gland growth. on this basis, bipolar mitoses may occur to replace cells that probably degenerated during treatment, whereas multipolar mitoses may lead to the occurrence of polyploidy. (C) 1997 Elsevier B.V. Ltd.

Photoreflectance studies of optical transitions in cubic GaN grown on GaAs(001) substrates

The optical properties of cubic GaN epitaxial layers were investigated by modulated photoreflectance (PR) and photoluminescence in the temperature interval from 5 to 300 K. The epilayers were grown on GaAs(001) substrates by molecular beam epitaxy using a nitrogen RIF-activated plasma source. The PR spectra show a transition which is well fitted using the third-derivative functional form of the unperturbed dielectric function, which we interpret as band-to-band transition. Our results allow determination of the temperature dependence of the main gap of c-GaN and give insights into the residual strain in the film, as well as allow us to estimate the binding energy of the complex formed by an exciton bound to a neutral acceptor. (C) 2003 Elsevier B.V. B.V. All rights reserved.

beta-ZnMoO4 microcrystals synthesized by the surfactant-assisted hydrothermal method: Growth process and photoluminescence properties

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A new processing method of CaZn2(OH)(6)center dot 2H(2)O powders: Photoluminescence and growth mechanism

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)