Genotype by environment interaction for birth and weaning weights of composite beef cattle in different regions of Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito do manejo sobre a produção e composição química de perfilhos do capim-colonião (Panicum maximum Jacq.)

O experimento foi conduzido com o objetivo de verificar os efeitos das freqüências de corte de 28, 35 e 42 dias, obtidas em dezembro, janeiro e fevereiro, cortadas rente a 15 cm e a 30 cm do solo, sobre a produção e composição química de perfilhos do capim-colonião. A área experimental foi adubada na semeadura e por ocasião dos cortes de uniformização. Verificou-se que a produção de MS foi o principal fator da produção de nutrientes por área. Os teores de PB dos perfilhos apresentaram comportamento não-linear com o avanço da idade e diminuíram sensivelmente a baixas alturas e altas freqüências de corte. Os teores de FDA dos perfilhos variaram pouco entre as idades de 28 e 42 dias. Concluiu-se que o melhor manejo do capim-colonião seria o corte a cada 42 dias e a 15 cm do solo.

Estimativa da radiação solar global diária em função do potencial de energia solar na superfície do solo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeito do hexazinone isolado e em mistura na eficiência fotossintética de Panicum maximum

Esta pesquisa teve como objetivo avaliar a velocidade e intensidade de ação do hexazinone isolado e em mistura com outros inibidores do fotossistema II, através da eficiência fotossintética de Panicum maximum em pós-emergência. O ensaio foi constituído de seis tratamentos: hexazinone (250 g ha-1), tebuthiuron (1,0 kg ha-1), hexazinone + tebuthiuron (125 g ha-1 + 0,5 kg ha-1), diuron (2.400 g ha-1), hexazinone + diuron (125 + 1.200 g ha-1), metribuzin (1.440 g ha-1), hexazinone + metribuzin (125 + 720 g ha-1) e uma testemunha. O experimento foi instalado em delineamento inteiramente casualizado, com quatro repetições. Após a aplicação dos tratamentos, as plantas foram transportadas para casa de vegetação sob condições controladas de temperatura e umidade, onde ficaram durante o período experimental, sendo realizadas as seguintes avaliações: taxa de transporte de elétrons e análise visual de intoxicação. A avaliação com o fluorômetro foi realizada nos intervalos de 1, 2, 6, 24, 48, 72, 120 e 168 horas após a aplicação, e as avaliações visuais, aos três e sete dias após a aplicação. Os resultados demonstraram diferença nos tratamentos, enfatizando a aplicação do diuron, que reduziu lentamente o transporte de elétrons comparado com os outros herbicidas e, em mistura com hexazinone, apresentou efeito sinérgico. Verificou-se com o uso do fluorômetro a intoxicação antecipada em plantas de P. maximum após a aplicação de herbicidas inibidores do fotossistema II de forma isolada e em mistura.

Efeitos de segunda e terceira ordem da ionosfera no posicionamento GNSS no Brasil

O Sistema de Posicionamento Global (GPS) transmite seus sinais em duas freqüências, o que permite eliminar matematicamente os efeitos de primeira ordem da ionosfera através da combinação linear ionosphere free. Porém, restam os efeitos de segunda e terceira ordem, os quais podem provocar erros da ordem de centímetros nas medidas GPS. Esses efeitos, geralmente, são negligenciados no processamento dos dados GPS. Os efeitos ionosféricos de primeira, segunda e terceira ordem são diretamente proporcionais ao TEC presente na ionosfera, porém, no caso dos efeitos de segunda e terceira ordem, comparecem também o campo magnético da Terra e a máxima densidade de elétrons, respectivamente. Nesse artigo, os efeitos de segunda e terceira ordem da ionosfera são investigados, sendo que foram levados em consideração no processamento de dados GPS na região brasileira para fins de posicionamento. Serão apresentados os modelos matemáticos associados a esses efeitos, as transformações envolvendo o campo magnético da Terra e a utilização do TEC advindo dos Mapas Globais da Ionosfera ou calculados a partir das observações GPS de pseudodistância. O processamento dos dados GPS foi realizado considerando o método relativo estático e cinemático e o posicionamento por ponto preciso (PPP). Os efeitos de segunda e terceira ordem foram analisados considerando períodos de alta e baixa atividade ionosférica. Os resultados mostraram que a não consideração desses efeitos no posicionamento por ponto preciso e no posicionamento relativo para linhas de base longas pode introduzir variações da ordem de poucos milímetros nas coordenadas das estações, além de variações diurnas em altitude da ordem de centímetros.

Low-altitude, near-polar and near-circular orbits around Europa

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeitos da irrigação e adubação nitrogenada sobre a massa de forragem de cultivares de Panicum maximum Jacq.

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Parameterized fast decoupled power flow methods for obtaining the maximum loading point of power systems. Part I. Mathematical modeling

The conventional Newton and fast decoupled power flow (FDPF) methods have been considered inadequate to obtain the maximum loading point of power systems due to ill-conditioning problems at and near this critical point. It is well known that the PV and Q-theta decoupling assumptions of the fast decoupled power flow formulation no longer hold in the vicinity of the critical point. Moreover, the Jacobian matrix of the Newton method becomes singular at this point. However, the maximum loading point can be efficiently computed through parameterization techniques of continuation methods. In this paper it is shown that by using either theta or V as a parameter, the new fast decoupled power flow versions (XB and BX) become adequate for the computation of the maximum loading point only with a few small modifications. The possible use of reactive power injection in a selected PV bus (Q(PV)) as continuation parameter (mu) for the computation of the maximum loading point is also shown. A trivial secant predictor, the modified zero-order polynomial which uses the current solution and a fixed increment in the parameter (V, theta, or mu) as an estimate for the next solution, is used in predictor step. These new versions are compared to each other with the purpose of pointing out their features, as well as the influence of reactive power and transformer tap limits. The results obtained with the new approach for the IEEE test systems (14, 30, 57 and 118 buses) are presented and discussed in the companion paper. The results show that the characteristics of the conventional method are enhanced and the region of convergence around the singular solution is enlarged. In addition, it is shown that parameters can be switched during the tracing process in order to efficiently determine all the PV curve points with few iterations. (C) 2003 Elsevier B.V. All rights reserved.

Parameterized fast decoupled power flow methods for obtaining the maximum loading point of power systems. Part II. Performance evaluation

The parameterized fast decoupled power flow (PFDPF), versions XB and BX, using either theta or V as a parameter have been proposed by the authors in Part I of this paper. The use of reactive power injection of a selected PVbus (Q(PV)) as the continuation parameter for the computation of the maximum loading point (MLP) was also investigated. In this paper, the proposed versions obtained only with small modifications of the conventional one are used for the computation of the MLP of IEEE test systems (14, 30, 57 and 118 buses). These new versions are compared to each other with the purpose of pointing out their features, as well as the influence of reactive power and transformer tap limits. The results obtained with the new approaches are presented and discussed. The results show that the characteristics of the conventional FDPF method are enhanced and the region of convergence around the singular solution is enlarged. In addition, it is shown that these versions can be switched during the tracing process in order to efficiently determine all the PV curve points with few iterations. A trivial secant predictor, the modified zero-order polynomial, which uses the current solution and a fixed increment in the parameter (V, theta, or mu) as an estimate for the next solution, is used for the predictor step. (C) 2003 Elsevier B.V. All rights reserved.

Produção e composição bromatológica da forragem do capim-mombaça (Panicum maximum Jacq.), submetidos a diferentes fontes e doses de corretivo de acidez

The experiment was carried in protected (greenhouse) atmosphere, in University of Engineering, UN-ESP of Ilha Solteira-SP, with the objective of evaluating sources (limestone and calcium silicate slag) and doses (0,0 0,5 1,0 1,5 2,0 times the recommended dose) of corrective in the bromatolouic composition, tillering and production of dry matter of the grass mombaca (Nuncio? maximum Jacq.). The lineation was completely randomized design, with four repetitions. It was evaluated the tiller number, the production of dry matter, the gross protein, neutral detergent fiber (NDF) and acid detergent fiber (ADF). The corrective influenced the tillering in almost all of the countings. The limestone provided larger production of dry matter in the doses of 1,5 and 2,0 times the recommended dose. The bromatologic composition of the forage was not influenced by the corrective and doses.

Maximum Phonation Time and s/z Ratio in a Large Child Cohort

Aim. The purpose of this study was to provide normal values for maximum phonation time (MPT) and the s/z ratio by examining 1660 children aged 4-12 years and without vocal signs or symptoms.Methods. The technique was based on the sustained emission of the /a/ vowel and fricatives /s/ and /z/.Results. The average of the MPT in children of the different age groups was as follows: 6.09 seconds for the age group 4-6 years (males, 5.97; female, 6.21 seconds), 7.94 seconds for the age group 7-9 years (males, 8.07; females, 7.79 seconds), and 8.98 for the age group 10-12 years (males, 9.05; females, 8.92 seconds). The overall average for males was 7.78 and females 7.64 seconds. The s/z ratio was near 1.0 in most children but above 1.2 in 133 children and below 0.8 in 133 children.Conclusion. These values of MPT and s/z ratio can be used as normative in further pediatric studies.

Recuperação de larvas de Trichostrongylus colubriformis em diferentes estratos de Brachiaria decumbens E Panicum maximum

The purpose of the experiment was to evaluate infective Trichostrongylus colubriformis larvae vertical migration in two forage grass species. Experimental modules formed by eight plots, established with Brachiaria decumbens cv. Australian and Panicum maximum cv. Aruana, were used in the study, totaling four plots for each grass species. Each plot was divided into six 30 x 30 cm subplots. Larval migration was evaluated in the four seasons of the year, in different plant strata (0-7, 7-14, 14-21, 21-28 and above 28 cm). Four feces deposits were made, one in each season of the year, in the middle of 30-cm tall forage. The feces were collected from the forage ten days after each feces deposit in the experimental subplots. Grass height was measured in each of the strata immediately before the collections. The forage of the different strata was cut from an area measuring 10-cm in radius. The feces were collected manually from the subplots. There was a grass species and grass stratum interaction in the deposit made in autumn (P < 0.05). During that season, most of the larvae were recovered from the Brachiaria grass base; meanwhile, at the forage apex, the biggest average was registered in the aruana grass. Infective larvae (U) recovery was similar among the different strata during spring. In springtime, the biggest L3 recovery occurred at the 21-28 cm stratum from both forage species. No L3 was recovered from any of the No L3 was recovered from any of the grass strata during winter and summer. Study results show that migration of T colubriformis larvae was more influenced by weather conditions Than by forage species.

Comparative evaluation of the efficacy of occlusal splints fabricated in centric relation or maximum intercuspation in temporomandibular disorders patients

Fabrication of occlusal splints in centric relation for temporomandibular disorders (TMD) patients is arguable, since this position has been defined for asymptomatic stomatognathic system. Thus, maximum intercuspation might be employed in patients with occlusal stability, eliminating the need for interocclusal records. This study compared occlusal splints fabricated in centric relation and maximum intercuspation in muscle pain reduction of TMD patients. Twenty patients with TMD of myogenous origin and bruxism were divided into 2 groups treated with splints in maximum intercuspation (I) or centric relation (II). Clinical, electrognathographic and electromyographic examinations were performed before and 3 months after therapy. Data were analyzed by the Student's t test. Differences at 5% level of probability were considered statistically significant. There was a remarkable reduction in pain symptomatology, without statistically significant differences (p>0.05) between the groups. There was mandibular repositioning during therapy, as demonstrated by the change in occlusal contacts on the splints. Electrognathographic examination demonstrated a significant increase in maximum left lateral movement for group I and right lateral movement for group II (p<0.05). There were no significant differences (p>0.05) in the electromyographic activities at rest after utilization of both splints. In conclusion, both occlusal splints were effective for pain control and presented similar action. The results suggest that maximum intercuspation may be used for fabrication of occlusal splints in patients with occlusal stability without large discrepancies between centric relation and maximum intercuspation. Moreover, this technique is simpler and less expensive.

Maximum inhibitory dilution of mouthwashes containing chlorhexidine and polyhexamethylene biguanide against salivary Staphylococcus aureus

Objective: The aim of the present study was to determine the in vitro maximum inhibitory dilution (MID) of two chlorhexidine-based oral mouthwashes (CHX): Noplak (R), Periogard (R), and one polyhexamethylene biguanide-based mouthwash (PHMB): Sanifill Premium (R) against 28 field Staphylococcus aureus strains using the agar dilution method. Materials and Methods: For each product, decimal dilutions ranging from 1/10 to 1/655,360 were prepared in distilled water and added to Mueller Hinton Agar culture medium. After homogenization, the culture medium was poured onto Petri dishes. Strains were inoculated using a Steers multipoint inoculator and dishes were incubated at 37 degrees C for 24hours. For reading, MID was considered as the maximum dilution of the mouthwash still capable of inhibiting microbial growth. Results: Sanifill Premium (R) inhibited the growth of all strains at 1/40 dilution and of 1 strain at 1/80 dilution. Noplak (R) inhibited the growth of 23 strains at 1/640 dilution and of all 28 strains at 1/320 dilution. Periogard (R) showed inhibited growth of 7 strains at 1/640 dilution and of all 28 strains at 1/320 dilution. Data were submitted to Kruskal-Wallis statistical test, showing significant differences between the mouthwashes evaluated (p<0.05). No significant difference was found between Noplak (R) and Periogard (R) (p>0.05). Sanifill Premium (R) was the least effective (p<0.05). Conclusion: It was concluded that CHX-based mouthwashes present better antimicrobial activity against S. Aureus than the PHMB-based mouthwash.

Determination of the maximum inhibitory dilution of cetylpyridinium chloride-based mouthwashes against Staphylococcus aureus: an in vitro study

The aim of this in vitro study was to determine the maximum inhibitory dilution (MID) of four cetylpyridinium chloride (CPC)based mouthwashes: CPC+Propolis, CPC+Malva, CPC+Eucaliptol+Jua+Roma+Propolis (Natural Honey (R)) and CPC (Cepacol (R)), against 28 Staphylococcus aureus field strains, using the agar dilution method. Decimal dilutions ranging from 1/10 to 1/655,360 were prepared and added to Mueller Hinton Agar. Strains were inoculated using Steers multipoint inoculator. The inocula were seeded onto the surface of the culture medium in Petri dishes containing different dilutions of the mouthwashes. The dishes were incubated at 37 degrees C for 24 h. For readings, the MID was considered as the maximum dilution of mouthwash still capable of inhibiting microbial growth. The obtained data showed that CPC+Propolis had antimicrobial activity against 27 strains at 1/320 dilution and against all 28 strains at 1/160 dilution, CPC+Malva inhibited the growth of all 28 strains at 1/320 dilution, CPC+Eucaliptol+Jua+Roma+Propolis inhibited the growth of 2 strains at 1/640 dilution and all 28 strains at 1/320 dilution, and Cepacol (R) showed antimicrobial activity against 3 strains at 1/320 dilution and against all 28 strains at 1/160 dilution. Data were submitted to Kruskal-Wallis test, showing that the MID of Cepacol (R) was lower than that determined for the other products (p<0.05). In conclusion, CPC-mouthwashes showed antimicrobial activity against S. aureus and the addition of other substances to CPC improved its antimicrobial effect.