Manejo de palhada de cana colhida sem queima, produtividade do canavial e qualidade do caldo

O manejo da palhada da cana-de-açúcar com cana colhida sem queima associado a variedades mais adaptadas podem influenciar a produção de colmos e a qualidade do caldo. Assim, desenvolveu-se o presente trabalho com objetivo de avaliar a influência de diferentes variedades de cana-de-açúcar submetida a sistemas de manejo de colheita da cana colhida sem queima sobre a produção e a qualidade do caldo da cana-de-açúcar. Os tratamentos foram os sistemas de manejo da palhada da soqueira colhida mecanicamente: palha sem triturar/sem cultivo (PST/SC); palha sem triturar/com cultivo com escarificador (PST/CC); palha triturada/com cultivo com escarificador (PT/CC), cultivado com 18 variedades de cana-de-açúcar (RB83-5486, RB85-5536, RB85-5546, RB84-5230, SP81-3250, SP80-3280, SP76-112, SP86-155, SP87-344, SP87-365, SP87-396, SP86-042, SP85-3877, SP84-5560, SP88-725, SP88-817, SP83-2847 Q-138). A qualidade do caldo da cana-de-açúcar varia em função das variedades e sistema de manejo da palhada da soqueira da cana colhida sem queima. O uso do cultivo da entrelinha com escarificador comparado ao sistema sem cultivo aumentou a produção de colmos e a tonelada de sacarose aparente por ha, entretanto, reduziu ATR e a sacarose aparente das soqueiras da cana colhida sem queima. A trituração da palhada nos tratamentos com uso do cultivo da entrelinha com escarificador não é importante na produção e na qualidade de colmos das soqueiras da cana colhida sem queima.

Função pulmonar na evolução de 35 doentes com paracoccidioidomicose

Lesões pulmonares observadas na paracoccidioidomicose (pbmicose) pela radiologia foram designadas: leve, moderada e grave de acordo com critério estabelecido pelos autores. Lesões infiltrativas intersticiais bilaterais nddulo fibrolineares e cotonosas foram identificadas respectivamente em 34 e em 23 doentes. Formas leve, moderada e grave assinaladas respectivamente em 6 10 e 19 mostraram à análise radiológica evolutiva melhora em 2, piora em 15 e manutenção do padrão da lesão em 18 doentes. Testes de função pulmonar realizados nos doentes durante o retorno ambulatorial evidenciaram: 12 com padrão espirográfico normal, 20 obstrutivos e 3 mistos; 34 doentes estavam hiperventilando e todos apresentaram aumento da diferença alvéolo arterial. Os resultados obtidos permitiram supor que a fibrose residual descrita nos padrões radiológicos; manutenção e piora de 33 deles aliada à doença obstrutiva crônica verificada pelas provas de função pulmonar constituíram subsídios para o desenvolvimento do Cor pulmonale assinalado

Experiência da gravidez após os 35 anos de mulheres com baixa renda

Objetivou-se apreender as representações sociais sobre gravidez após os 35 anos a partir de mulheres com baixa renda que vivenciaram essa experiência. A abordagem qualitativa foi empregada com base na Teoria das Representações Sociais. Foram realizadas entrevistas semiestruturadas com 25 gestantes usuárias de um serviço público de referência do interior paulista. Os dados foram sistematizados pela técnica do Discurso do Sujeito Coletivo. Verificou-se que a opção pela gravidez tardia se atrela ao desejo da mulher de consolidar suas relações em novas uniões conjugais, à estabilidade financeira e à maturidade do casal. As mulheres representam esta experiência como positiva, se houver planejamento prévio, envolvimento do companheiro e se for bem aceita pela família, após sua constatação. Sem a satisfação destas condições, as representações revestem-se de sentimentos negativos ligados a dor, sofrimento e morte. As conclusões deste estudo enfatizam a importância de os serviços públicos de saúde considerarem estes aspectos.

Synthesis and characterization of PLZT (9/65/35) by the Pechini method and partial oxalate

ZrTiO4 (ZT), obtained by the Pechini method, was used as precursor for obtaining PLZT (lead lanthanum zirconium titanate). An aqueous solution of oxalic acid was prepared with particles of ZT, Pb(NO3)(2) and La2O3. After the PbC2O4 and La2O3 precipitate on ZT particles, the materials were calcined and X-ray diffraction (XRD) showed the cubic phase of PLZT. This material was sintered, in two steps, and a density of about 8.0 g/cm(3) was obtained. After the second sintering the XRD pattern showed the occurrence of tetragonal and rhombohedral phases. This was caused by a stoichiometric deviation and the material showed a high optical transparency. (C) 1998 Elsevier B.V. B.V. All rights reserved.

Floristic composition of the tree stratum of a semideciduous mesophytic forest in the municipality of Jahu, SP, Brazil

A floristic study was carried out in an area of semideciduous mesophytic forest, lied in the municipality of Jahu, São Paulo State, Brazil. Due to the fact of the forest be crossed by three small rivers, for the sampling process, the forest was divided in two sampling areas: Area I (under the influence of the rivers) and Area II (without this influence). Differences in the abundance of some species between the two sampling areas were observed.

Structural characterization of organometallic-derived 9.5/65/35 PLZT ceramics

This study consisted of an investigation of the influence of powder preparation on the phase and chemical compositions and microstructure of 9.5/65/35 PLZT materials sintered in an oxygen atmosphere. The powders with the formula Pb0.905La0.095(Zr0.65Ti0.35)(0.976)O-3+3.5 wt.% PbO were prepared by the polymeric organometallic precursor method (the Pechini method and the partial oxalate procedure). Phase composition was determined by X-ray diffraction of powder and EDS analysis, while grain size was determined based on the micrograph obtained from SEM. (C) 2001 Elsevier B.V. B.V. All rights reserved.

Ferroelectric and optical properties of Ba0.8Sr0.2TiO3 thin film

Barium strontium titanate (Ba0.8Sr0.2TiO3) thin films have been prepared on Pt/Ti/SiO2/Si substrates using a soft solution processing. X-ray diffraction and also micro-Raman spectroscopy showed that the Ba0.8Sr0.2TiO3 thin films exhibited a tetragonal structure at room temperature. The presence of Raman active modes was clearly shown at the 299 and 725 cm(-1) peaks. The tetragonal-to-cubic phase transition in the Ba0.8Sr0.2TiO3 thin films is broadened, and suppressed at about 35 degreesC, with a maximum dielectric constant of 948 (100 kHz). Electrical measurements for the prepared Ba0.8Sr0.2TiO3 thin films showed a remnant polarization (P-r) of 6.5 muC/cm(2), a coercive field (E-c) of 41 kV/cm, and good insulating properties. The dispersion of the refractive index is interpreted in terms of a single electronic oscillator at 6.97 eV. The direct band gap energy (E-g) and the refractive index (n) are estimated to be 3.3 eV and n = 2.27-2.10, respectively. (C) 2002 American Institute of Physics.

Sintering and characterization of PLZT (9/65/35)

PLZT(9/65/35) obtained by association between the Pechini method (ZT) and partial oxalate (PLZT) was prepared. The stoichiometric phase and monophasic (cubic) PLZT obtained by calcination did not occur after sintering. The sintering process, by using two stages, caused a liquid phase formation due to a PbO excess (5 and 10 wt%). Samples with high density (similar to 8 g/cm(3)) and optical transparency(similar to 12%) were obtained. However, an equilibrium between the excess of PbO of sample/atmosphere PbO leads to a segregated PbO phase on the boundaries of the microstructure. A diffusion of Zr, Ti and La ions from PLZT to PbO phase promoted a stoichiometric deviation of the matrix and modified the optical and dielectric characteristics. (C) 2000 Elsevier B.V. Ltd and Techna S.r.l. All rights reserved.

Synthesis and characterization of 9.5/65/35 PLZT prepared from the polymeric precursors

The 9.5/65/35 PLZT was prepared from the polymeric precursors (the Pechini and partial oxalate process) and by sintering in two stages in an oxygen atmosphere. After thermal treatment at 400 degreesC, the powders were calcinated and sintered at 1200 degreesC with slow heating and cooling rates. The second stage of sintering consisted of hot pressing at the same temperature in oxygen atmosphere. After calcination of PLZT powders obtained by both methods, as well as after sintering of PLZT obtained by Pechini process, the paraelectric cubic phase was formed. After sintering of PLZT obtained by partial oxalate procedure, small tetragonality of crystal structure was observed. After hot pressing PLZT was pseudocubic. SEM microstructural analyses were carried out of the sintering and hot pressed samples and indicated the small grain size less than 2 mum. (C) 2001 Elsevier B.V. B.V. All rights reserved.

Hot-pressed 9.5/65/35 PLZT prepared by the polymeric precursor method

A 9.5/65/35 PLZT ceramic with a Pb-0.905 La-0.095 (Zr-0.65 Ti-0.35)(0.976) O-3 + 35 w% PbO formula was prepared using the Pechini method for powder preparation and two-step sintering in an oxygen atmosphere. Thr first step consisted of sintering at 1200 degrees C for 4 h with slow heating and cooling rates. The second step consisted of hot pressing at 1200 degrees C for 3 h, with slow heating and cooling rates and pressing pressures of 20 MPa (initial pressure) and 40 MPa (at sintering temperature). Investigations were made of the powder phase formation and powder morphology, i.e. The structure of sintered and hot-pressed PLZT ceramics. SEM microstructural analyses were carried out on the sintering and hot-pressing processes. (C) 2000 Elsevier B.V. Ltd and Techna S.r.l. All rights reserved.

Preparation of 9/65/35 PLZT thin films deposited by a dip-coating process

Crack-free polycrystalline PLZT (Pb,a)(Zr,Ti)O-3 thin films with the perovskite structure were prepared by dir-coating using the Pechinis process. Lead acetate, hydrated lanthanum carbonate, zirconium n-propoxide and titanium isopropoxide were used as raw materials. The viscosity of the solution was adjusted in the range of 20 to 56 cP and the films were deposited by a dip-coating process on silicon (100) as substrate. Solutions with ionic concentration of 0.1 and 0.2 M were used. Thin film deposition was accomplished by dipping the substrates in the solution with control of withdrawal speed from 5 to 20 mm/min. The thin films were thermally treated in two steps: at 300 degreesC amid 650 degreesC. The influence of withdrawal speed. viscosity, heating rate and ionic concentration on the morphology of PLZT thin film was discussed. (C) 2001 Elsevier B.V. Ltd. All rights reserved.

Effect of Hydrogen Peroxide at 35% on the Morphology of Enamel and Interference in the De-remineralization Process: An In Situ Study

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Preparation of 9.5/65/35 PLZT powders by organic precursor method

In this study the preparation of 9.5/65/35 PLZT ceramic powders were investigated. The powders with the formula Pb0.905La0.095(Zr0.65 Ti0.35)0.976O3 + 3.5 w% PbO were prepared using Pechini process and partial oxalate method. The powder phase formation, powder morphology, and green density of PLZT were shown.

Evidence for 2.35 to 2.30 Ga juvenile crustal growth in the northwest Borborema Province, NE Brazil

The c. 600 Ma Brasiliano Borborema Province of NE Brazil comprises a complex collage of Precambrian crustal blocks cut by a series of continental-scale shear zones. The predominant basement rocks in the province are 2.1-2.0 Ga Transamazonian gneisses of both juvenile and reworked nature. U-Pb zircon and Sm-Nd whole-rock studies of tonalite-trondhjemite-granodiorite basement gneisses in the NW Ceará or Médio Coreaú domain in the northwestern part of the Borborema Province indicate that this represents a continental fragment formed by 2.35-2.30 Ga juvenile crust. This block has no apparent genetic affinity with any other basement gneisses in the Borborema Province, and it does not represent the tectonized margin of the c. 2.1-2.0 Ga São Luis Craton to the NW. The petrological and geochemical characteristics, as well as the Nd-isotopic signatures of these gneisses, are consistent with their genesis in an island arc setting. This finding documents a period of crustal growth during a period of the Earth's history which is known for its tectonic quiescence and paucity of crust formation. © Geological Society of London 2009.

Indirect cytotoxicity of a 35% hydrogen peroxide bleaching gel on cultured odontoblast-like cells

The aim of this study was to evaluate the trans-enamel and trans-dentinal effects of a 35% hydrogen peroxide (H2O2) bleaching gel on odontoblast-like cells. Enamel/dentin discs obtained from bovine incisors were mounted in artificial pulp chambers (APCs). Three groups were formed: G1- 35% H2O2; G2- 35% H2O2 + halogen light application; G3- control. The treatments were repeated 5 times and the APCs were incubated for 12 h. Then, the extract was collected and applied for 24 h on the cells. Cell metabolism, total protein dosage and cell morphology were evaluated. Cell metabolism decreased by 62.09% and 61.83% in G1 and G2, respectively. The depression of cell metabolism was statistically significant when G1 and G2 were compared to G3. Total protein dosage decreased by 93.13% and 91.80% in G1 and G2, respectively. The cells in G1 and G2 exhibited significant morphological alterations after contact with the extracts. Regardless of halogen light application, the extracts caused significantly more intense cytopathic effects compared to the control group. After 5 consecutive applications of a 35% H2O2 bleaching agent, either catalyzed or not by halogen light, products of gel degradation were capable to diffuse through enamel and dentin causing toxic effects to the cells.