346 resultados para temperatura ambiente.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
A regulação da temperatura corpórea, diante de variações da temperatura ambiente e/ou da taxa de produção de calor metabólico, envolve mecanismos reguladores da taxa de troca de calor entre o animal e o ambiente. Um destes mecanismos consiste na modulação da temperatura superficial de áreas especificas do corpo do animal, via ajustes vasomotores, que podem atuar tanto no sentido de promover a dissipação de calor (em uma situação de aumento da temperatura) quanto na retenção deste (em uma situação de queda de temperatura). Neste contexto, alguns animais exibem partes do corpo, como orelhas, membros, cauda, etc. que funcionam de maneira otimizada para realizar esta troca de calor. Nestes casos, estas partes são referidas como “janelas térmicas” e possuem em comum três características básicas: 1 - alta área superficial; 2 - baixo isolamento térmico; 3 – boa vascularização e controle do fluxo sanguineo na dependência da temperatura. Recentemente, o uso do bico como uma janela térmica foi descrito para o tucano-toco, Ramphastos toco (Aves, Ramphastidae), revelando ser esta uma estrutura com a maior capacidade de troca térmica já identificada. Naquele estudo, porém, a temperatura superficial das aves (bico) foi monitorada enquanto elas eram submetidas a mudanças bastante lentas (ao longo de várias horas) da temperatura ambiente, de forma que a dinâmica temporal da resposta exibida pelas aves permanecia ainda bastante desconhecida. Além disso, sabe-se que os membros das aves também atuam como importantes vias para troca de calor com o ambiente, e no caso do tucano toco, a regulação da temperatura superficial desses apêndices frente a variações da temperatura não tinha sido estudada. Portanto, o objetivo do presente estudo foi investigar a velocidade com que os ajustes vasomotores subjacentes à modulação... (Resumo completo, clicar acesso eletrônico abaixo)
Resumo:
Os morcegos estão constantemente expostos a condições ambientais que podem alterar o seu padrão de atividade. No presente trabalho descrevemos a atividade horária de morcegos filostomídeos em três áreas florestais no sudeste do Brasil. Também testamos a influência da temperatura ambiente, luminosidade da lua e de diferentes áreas na atividade de Carollia perspicillata. Foram coletados 154 indivíduos pertencentes à família Phyllostomidae, sendo 37,7% deles representados por C. perspicillata (n = 60). Glossophaga soricina, Sturnira lilium e Desmodus rotundus apresentaram um padrão unimodal em sua atividade. Já Anoura caudifer, Chrotopterus auritus e Micronicterys microtis demonstraram uniformidade nas capturas ao longo da noite. C. persprcillata apresentou um padrão bimodal, com picos de atividade no início e final da noite, no entanto a espécie foi ativa durante todo o período. Houve diferença na atividade de C. perspicillata entre as áreas, sendo uniformemente distribuída nas áreas I e III, e unimodal na área II. A temperatura ambiente e a luminosidade do luar não foram fatores decisivos na regulação da atividade de C. perspicillata.
Resumo:
This work aims to synthesize the manganese and zinc ferrite, by the polymeric precursor method, in order to obtain materials with appropriate characteristics for the application in medical diagnosis techniques. The manganese and zinc ferrite powders with the composition of Mn(1-x)ZnxFe2O4, where x=0,23, were prepared and calcined in air at different times and temperatures. The X-ray diffraction (XRD) data show that the sample calcined at 400°C crystallize as ferrite (monophase), but in an inverted spinel structure (high content of iron occupying manganese tetrahedral site and manganese occupying the iron octahedral site). The samples calcined at temperatures between 600°C and 900°C shows the secondary phase of hematite and the sample calcined at 1100oC shows to be monophase in ferrite with normal spinel structure. The monophase powders of ferrite showed a reduction in the surface area and an increasing in the pore size for higher calcination temperatures. The magnetic analysis show that the sample calcined at 400°C presents satisfactory magnetization at room temperature, however, it behaves as diamagnetic material at low temperatures (10K). The powder containing hematite, without the partial substitution of iron ions by manganese, showed to have low transition temperature, and consequently low magnetization at room temperature. The hematite, when partially substituted, provides materials with irregular magnetization at the saturation region. The powder calcined at 1100°C shows high magnetization either at room temperature or low temperature (10K)
Resumo:
Apocynin, a methoxy-catechol originally extracted from the root of Picrorhiza kurroa, has been used as an inhibitor of the NADPH oxidase complex in phagocytic and nonphagocytic cells. Its mechanism of inhibition is linked to their prior activation through the action of peroxidases leading to oxidation of the dimeric product, diapocynin. In this study, dipocinina was synthesized and investigated its effect as an inhibitor of activation NADPH oxidase in neutrophils (PMN) and peripheral blood mononuclear cells (PBMC). The synthesis of diapocinina was performed by oxidation of apocinina by potassium persulphate in the midst of water for 5 minutes at room temperature. The precipitate was filtered and washed with water and methanol. Diapocinina was characterized by mass spectrometry. PMN and PBMC were obtained from peripheral blood of healthy donors and purified for gelatin sedimentation, or centrifugation with Histopaque ®, the red cells were lysed with ice water or ammonium chloride. Diapocinina or apocinina were incubated with opsonized zymosan, activation of PMNs and release of superoxide anion, these monitored by chemiluminescent assay dependent lucigenina. We found that diapocinina inhibitor was no better than the apocinina in PMN. However, diapocinina was more efficient than apocinina as an inhibitor of NADPH oxidase in PBMC. In conclusion, whereas PBMC are relatively poor compared with peroxidases PMN, our results are consistent with the need for oxidation apocinina for its effect as an inhibitor of NADPH oxidase
Resumo:
O fluconazol (FLU) é um antifúngico muito utilizado no tratamento de dermatomicoses devido à sua eficácia e segurança. No entanto, este pode apresentar perfil farmacocinético muitas vezes inadequado, promovendo recorrência da doença ou resistência do fungo, apresentando uma série de efeitos colaterais além de alta toxicidade. Por esta razão, há uma busca contínua de novos medicamentos antifúngicos mais potentes, mas, sobretudo, mais seguros que os existentes. Os carreadores lipídicos nanoestruturados (NLCs) são compostos por uma matriz contendo lipídio liquido e sólido, e possui como uma de suas vantagens a alta capacidade de encapsulamento. O objetivo do trabalho foi desenvolver e caracterizar NLCs para administração cutânea de fluconazol. A solubilidade do FLU foi avaliada em ácido oleico (AO) e monoestearato de glicerila (GMS) e observou-se uma maior incorporação de FLU na mistura desses lipídios do que nos compostos isolados. Os NLCs contendo AO, GMS, poloxamer-407, fosfatidilcolina de soja (PC) e FLU foram desenvolvidos empregando o método de homogeneização em alta velocidade de cisalhamento à quente. A caracterização foi realizada por espectroscopia de correlação de fótons e os resultados de diâmetro médio, índice de polidispersidade e potencial zeta foram de 218,63 e 314,1nm, 0,417 e 0,640 e -28,4 e -25,8mV para os NLCs com (NLC_FLU) e sem o FLU (NLC) respectivamente. No estudo de estabilidade, as formulações NLC e NLC_FLU foram armazenados à 8ºC e à temperatura ambiente e os resultados mostraram maior estabilidade durante os seis meses para os NLC_FLU armazenada à 8ºC. A morfologia dos NLCs foi determinada por microscopia eletrônica de varredura de efeito de campo na qual os NLCs apresentaram morfologia esférica e escala nanométrica. Uma metodologia foi validada por espectrofotometria na região do ultravioleta para a determinação da eficiência de encapsulação (EE) do fármaco que foi ...
Resumo:
Aedes (Stegomyia) aegypti is a species of mosquitoes known to be the vector of diseases such as dengue and yellow fever, and a better understanding of aspects of their biology can help in the establishment of control strategies for the same. Several previous studies showed that temperature significantly affects the development of immature stages of insects. In general, higher temperatures (up to a threshold) accelerate the development of insects, and lower temperature retards the same. This rule also applies to mosquitoes, including Ae. aegypti. But not still know the effects of daily variation of temperature on the developmental stages of mosquitoes. And this detail is very important, since in natural breeding or artificial, The mosquitoes usually face temperature variations over a single day, which should interfere with its development until the emergence of the adult forms. For this reason, the objective of this study is to analyze the effect of alternating temperatures on the development of Ae. aegypti. To conduct the study, adults were collected active in the neighborhood Bela Vista Campus of UNESP - Rio Claro, SP, using a sweep net or using ovitraps for immatures, and the active search for breeding. Individuals collected were kept under experimental conditions in the laboratory. The adult samples were identified to species level, were considered for the experiments, only samples of Ae. aegypti. The insects were housed in plastic cages, suitable for creating flies. These were fed with sugar solution and blood meal on alternate days. The eggs obtained were used in the experiment with four different temperature regimes. The data collected were analyzed by evaluating whether the different treatments influenced the development of immature to adult, performing the Kruskal-Wallis test and the statistical software BioEstat. Statistical analysis of the sex ratio... (Complete abstract click electronic access below)
Resumo:
Desde o conhecimento da radiação e seus efeitos a necessidade de mensurá-la intriga os cientistas. Os detectores de radiação mais difundidos atualmente fazem o uso de cristais semicondutores. Porém, esses detectores tem uma temperatura ótima de funcionamento que acaba sendo ultrapassada, já que o processo gera calor. Por isso, o resfriamento acaba sendo uma necessidade. O desenvolvimento de detectores de radiação com cristal semicondutor que opere a temperatura ambiente é tema de muitos estudos, já que evitaria o processo de resfriamento, trabalhoso e de alto custo. No Centro de Tecnologia das Radiações (CTR) do Instituto de Pesquisas Energéticas e Nucleares (IPEN) o sal de Brometo de Tálio (TlBr) é estudado para esta finalidade. Até ser um cristal semicondutor este sal deve passar por vários processos, entre eles o de purificação e o de cristalização. A técnica utilizada para purificar este cristal é a de Refino zonal. Após ser purificado por esta técnica o sal estará apto a ser cristalizado e consequentemente integrar um equipamento de detecção de radiação. Portanto, esta monografia teve como objetivo realizar a análise da segregação das impurezas do sal de TlBr através da técnica de espectroscopia de massa em fonte de plasma induzido (ICP-MS) e espectroscopia de emissão atômica (ICP-AES). Determinando assim se o mesmo está apto a ser cristalizado e vir a compor um detector de radiação
Resumo:
As influências do exercício físico crônico sobre o tecido ósseo e hematológico de ratos Wistar têm sido investigados na literatura, porém são raros os trabalhos que abordam tais aspectos numa faixa etária mais precoce, na qual os efeitos podem ser benéficos ou até prejudiciais ao desenvolvimento. Assim, os principais objetivos deste estudo foram investigar os efeitos do treinamento físico regular e predominantemente aeróbio sobre aspectos endócrinos e metabólicos, sobre o tecido ósseo e sistema imunológico. Foram utilizados ratos machos, da linhagem Wistar, recém-desmamados (30 dias), mantidos no Biotério do Laboratório de Biodinâmica do Departamento de Educação Física, sob condições controladas (temperatura ambiente controlada de 25ºC e fotoperíodo de 12h claro/12h escuro). Os animais foram distribuídos em dois grupos experimentais: grupo sedentário (GS) e grupo treinado (GT). Os animais treinados foram submetidos a um protocolo de natação, 5 vezes/semana, 1 hora/dia, com carga de 5% em relação ao peso corporal, durante 6 semanas consecutivas, em água com temperatura controlada (32±2ºC). Ao final do período experimental, foram coletadas amostras de sangue para contagem total e diferencial de leucócitos e hematócrito. Após o sacrifício, foram coletadas amostras de soro para dosagem de glicose, proteínas totais, triglicérides, colesterol e amostras do fígado e músculo para a determinação dos teores de glicogênio, e tíbia para determinação do comprimento e área ósseas. Os dados foram apresentados como média ± desvio padrão. Para identificar diferenças estatísticas entre os grupos utilizou-se teste-t de Student para amostras independentes. O nível de significância foi pré-estabelecido em 5%. Pôde-se constatar que o treinamento físico regular realizado ...(Resumo completo clicar acesso eletrônico abaixo)
Resumo:
Pós-graduação em Microbiologia Agropecuária - FCAV
Resumo:
The purpose of the present investigation was to characterize the pitanga seeds on centesimal composition, and also to evaluate its antioxidant potential and fatty acid profile. For obtaining the extract, the dehydrated and ground seeds were treated with ethyl alcohol for 30 minutes, at a proportion of 1:3 of seeds:ethyl alcohol, under continuous agitation at room temperature. Afterwards, the mixture was filtered and the supernatant was placed into a rotoevaporator at 40ºC for determining the extract’s dry matter yield, by direct weighing. According to the results, the seeds of cherry showed high amounts of carbohydrates, and offer relevant content and antioxidant activity of phenolic compounds. In the seed oil, cherry high lighted a higher percentage of unsatured fatty acids, oleic being the main component.
Resumo:
The automobile industry is increasingly interested in reducing vehicle weight for greater speed, lower fuel consumption and emissions, through innovation of materials and processes. One way to do this is to seek the replacement of conventional processes by the use of structural adhesives. Structural adhesives are highly resistant materials, which can replace rivets, bolts and welds allowing the substrate / adhesive assemble is stronger than the substrate itself. One of the major advantages of gluing with respect to welding is its esthetic appearance, since it does not leave marks. For this reason, parts to be soldered require a minimum thickness so that the marks do not appear, since the pieces from gluing have no restriction as to the thickness. By replacing the vibration welding process for gluing process of the instrument panel parts of an automobile, one obtains a reduction of the thickness of the parts and therefore it decreases the weight of the car. This work aims to study the various structural adhesives that already exist on the market to be applied on the instrument panel. The mechanical test performed to measure the maximum adhesive strength was the Lap Shear Test at 23°C (room temperature), -35°C and 85°C. The types of adhesives used were the hot-melt and the bi-component. By the results obtained, it is in favor using the bi-component for application to the union of instrument panel parts
Resumo:
Several alloys present the shape memory effect and among them, the equiatomic NiTi alloy, nitinol, is the most important one. It is usually used in several engineering applications and also in biomedical devices, in the fabrication of orthodontic wire, stents and Judet staples. Although a considerable amount of these biomedical devices is utilized in Brazil and a fraction of it is already made here, all nitinol used is bought abroad. Thus, it is important to develop the necessary know-how to fabricate NiTi wire and sheet. It would mean less importation with job creation and wealth generation for the country. In this work nitinol was obtained powder metallurgy from elemental powders of Ti and Ni using uniaxial compression and uniaxial compression followed by isostatic compression. The final densities achieved were determined by the Archimedes method. The precipitation of intermetallic secondary phases was studied and the samples were characterized by metallographic analysis, optical microscopy and X-ray diffraction. Results indicated that 50 hours sintering route showed a low amount of intermetallics, and no trace of unreacted powder. XRD and metallography at room temperature indicated B19’ as the predominant phase, which corresponds to martensite. Although density results showed little dispersion, the most dense sample was compacted under uniaxial compression and presented 4.8 g/cm3, corresponding to 20.84% porosity. Density variation was considered normal to the measurement process and independent of the compaction mode
Resumo:
Pós-graduação em Agronomia (Energia na Agricultura) - FCA
Resumo:
Pós-graduação em Engenharia Mecânica - FEG