Estimativa da tendência diferencial do código nos receptores GNSS

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Metodologia computacional baseada em DFT, para compreensão de processos eletródicos em fases intermetálicas ordenadas

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Rigidez dos triângulos

Pós-graduação em Matemática em Rede Nacional - IBILCE

Avaliação de desempenho do dispositivo de medida de resistividade elétrica em laboratório

Pós-graduação em Engenharia Civil e Ambiental - FEB

Estudo químico quântico relativístico das propriedades eletrônicas e estruturais dos compostos Aun(n=1-5), AuOn-e AuSn - (n=1-2) e AuH

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Determinação da temperatura de referência T0 da curva mestre na região de transição dúctil-frágil de aços ARBL

Materiais estruturais utilizados no projeto de equipamentos e instalações industriais podem apresentar mudança de seu comportamento à fratura quando se varia a temperatura. Este tipo de comportamento caracteriza-se pela existência de uma curva de transição, onde 3 regiões ficam bem definidas: os patamares inferior e superior e a região de transição. Na região de transição, os resultados experimentais apresentam alto espalhamento e são bastante dependentes da geometria ensaiada. Para solucionar este problema, foi desenvolvido um modelo analítico experimental, que resultou na edição da norma ASTM E1921-97. O trabalho inclui um estudo da influência de diversas rotas de tratamentos térmicos aplicadas em um aço 4130 utilizado pela indústria aeronáutica, um aço de qualidade API utilizado pela indústria petrolífera e um aço da classe A516 atualmente utilizado pela indústria nacional de vasos de pressão, na microestrutura, propriedades mecânicas de tração e tenacidade à fratura. Os resultados mostraram que o aço 4130 A450, apresentou a melhor correlação entre resistência e tenacidade entre as microestruturas pesquisadas. Este comportamento deve estar associado a rota de tratamento térmico aplicada a esta condição. O tratamento de austêmpera possibilita a formação de bainita que, tradicionalmente é conhecida por apresentar elevados valores de tenacidade. O método proposto pela ASTM pode ser considerado viável para as diversas microestruturas pesquisadas ampliando a aplicação da metodologia que recomenda o ensaio apenas para aços ferríticos. No entanto, a metodologia da Curva Mestra em materiais tratados termicamente deve ser conduzida de forma a se estabelecer parâmetros que considerem as modificações microestruturais sofridas pelo material.

Avaliação cinemática em cães: revisão

Kinematics is the geometry of motion, including displacement, speed and acceleration, without considering the forces acting over a body. The use of kinematics is still very limited when we are evaluating dogs because of the high cost of the equipment, but the information obtained is objective and precise, what is essential for a trustful evaluation. Taking all this into consideration, this evaluation will describe some researches that used the method, specifying the final objective for each of them. By this analysis, we can conclude that kinematic studies, according to the characteristics of dog races, are necessary to explain how body structure and conformance may affect the function. Besides that, according to normative patterns of a population it is possible to study some diseases and treatment evolution

Papel da tectônica rúptil na possível migração de hidrocarbonetos: estudo da porção noroeste da estrutura de Pitanga, região central do estado de São Paulo

This work presents structural studies in the northwestern portion of the Pitanga Structural High, between the towns of Ipeúna and Charqueada. The area is composed by the sedimentary rocks from Paraná Basin, represented basically by Paleozoic rocks (Itararé Group, Tatuí, Irati and Corumbataí formations) and Mesozoics rocks (Pirambóia and Botucatu formations), in association with lower Cretaceous intrusive basic rocks expressed by dikes and sills. The most important structural features are distensive faults, which put together unleveled tectonic blocks and are frequently filled by diabase dikes. In this context, the main objective of this work is the study of local structures and the recognition of the tectonic association between dropped and uplifted blocks, jointly with the caracterization of a production, migration and storage model for hydrocarbons. Through the interpretation of aerial photos, field recognitions, structural and laboratorial analysis, a normal fault with direction of N30W and a slip of 20-25 meters located south of Ipeúna was recognized this fault puts the Tatuí and Irati Formations side by side. At this place and by the SP-191 route (north of Ipeúna city), sandstones from the top of Tatuí Formation are impregnated by asfaltic material. The data interpretation shows that local fault systems with NW directions have played a determinant part in the fault blocks arrangement, placing sandstone lenses from Tatuí Formation topographically above the oil shales from Irati Formation. In addition, these systems acted as migration paths to transport and storage hydrocarbon in sanstone lenses from Tatuí Formation

Avaliação da erosão hídrica, transporte de sedimentos e qualidade da água na bacia do córrego Monjolo Grande

Understanding the linkages between the natural elements is essential for being promoted the land use, occupation and sustainable management of environmental systems. Universal Soil Loss Equation (USLE), as a predictive model of erosion, is important to allowing the prevention of possible environmental impacts which may drastically interfere in natural or anthropic environments, as well as prevent potential financial wastes and even contribute to greater efficiency of agricultural production. This research will be working some USLE parameters, emphasizing topographic factor from Ribeirão Monjolo Grande watershed. Among the factors considered by the USLE, the Topographic Factor interferes directly in the erosive dynamic of a watershed because it involves variables related to hydrological processes that occur on it. In this research, were discussed different methods for obtaining the Topographic Factor (BERTONI e LOMBARDI NETO, 1985; MOORE e BURCH, 1986; DESMET E GOVERS, 1996) in GIS environment. After comparison between the methods, was indicated that best represents the conditions of geometry strand of the study area. Finally, other factors (R, K, C, P) considered by the USLE were obtained. The attainment of these parameters were guided by the use of geotechnologies, especially in Geographic Information Systems (GIS), with the assistance of secondary data and periodic field visits. The results obtained contributed to the understanding of hydrosedimentological dynamic in this area and serve as a viable strategy for studies of soil loss, aiming at developing consistent material for future researches about environmental planning and land management

O efeito da modalidade prévia sobre a subseqüente em provas de triatlo: aspectos fisiológicos e biomecânicos

O triatlo é uma modalidade combinada envolvendo outras três modalidades de endurance: natação, ciclismo e corrida, o que torna as necessidades biomecânicas e fisiológicas da modalidade combinada diferente das demandas e adaptações sofridas por treinamentos realizados nas modalidades de forma isolada. A fadiga imposta pela modalidade prévia poderá ser determinante no bom desempenho do atleta nas modalidades subseqüentes e neste sentido é importante analisarmos não apenas a influência do ciclismo sobre a corrida onde existe maior semelhança entre as fibras musculares recrutadas predominantemente, como a influência da natação sobre as demais modalidades. Algumas estratégias podem ser adotadas afim de minimizar a perda de performance que uma modalidade irá exercer sobre a subseqüente relacionadas a especificidade do treinamento e geração de adaptações específicas, estratégias de ritmo de prova, possibilidade de utilização do vácuo durante o percurso de ciclismo e da esteira na natação, utilização de roupas de neoprene na natação e adaptações na geometria do quadro da bicicleta.

O uso das TIC nas aulas de matemática na perspectiva do professor

The objective of this research is to understand whether the mathematics lessons teachers use ICT and how they see their use. For this, we prepared a questionnaire with four questions for the subjects of our research, which are ex - students of Bachelor in Mathematics FEG / UNESP, in exercise of the profession. The questionnaire data were analyzed following the procedures of phenomenological research. This approach enabled us to draw up three open categories. The first Recourse to boost student learning and school, leads us to interpret that for the interviewees, ICT resources are leading students to do research making them responsible for their learning and providing them with conditions respond the issues raised by the teacher, which generates greater interactivity. The second, Possibility to use software related to mathematical content shows that the subject sees ICT as resources that allow the study of mathematical content, especially geometry and functions, so that student learning is leverage. The third, Obstacles to the use of technology in the classroom shows that even if the subjects recognize the importance of ICT use, they do not use it as often as they would like because of the difficulties that are related to infrastructure and didactic and pedagogical conditions

Matemática e Arte: interdisciplinaridade

The objective of this study is to perform a theoretical study of the possible relationship between mathematics and art. For some people, the association between these fields of knowledge may simply seem absurd, possibly because they do not know what is in common between an area considered rigorous, rational, objective, and a more emotional, intuitive, subjective. In this context, interdisciplinarity has an important role, in proposing the contextual integration between the subject content, such as projective geometry and the renaissance. Are also presented as examples of this union, the technique of Moses and the geometric patterns of indigenous crafts, as well as the work of artist Maurits Cornelis Escher, a legitimate representative of the relationship between art and mathematics

Otimização do braço inferior da suspensão dianteira do veículo Baja utilizando o método dos elementos finitos

Mass reduction coupled with the mechanical performance in service has been the goal of many projects related to the transport area, considering the advantages that mass reduction can bring. However, make a simple material substitution without design a new geometry to corroborate for the best component performance, often makes the replacement unviable. In this study, it was investigated the advantages of replacing the prototype BAJA SAE front suspension lower arm of Equipe Piratas do Vale de BAJA SAE - Universidade Paulista, Campus Guaratinguetá, actually produced with steel, for a new component made of carbon fiber composite. The new geometry has been developed to provide the best possible performance for this component and your easy manufacturing. The study was done using the 3D modeling tools and computer simulations via finite element method. The first stage of this work consisted on calculation of the estimated maximum contact force tire / soil in a prototype landing after jump at one meter high, drop test in the laboratory with the current vehicle, current front suspension lower arm 3D modeling, finite element simulation and analysis of critical regions. After all current component analysis, a new geometry for the part in study was designed and simulated in order to reduce the component mass and provide a technological innovation using composite materials. With this work it was possible to obtain a theoretical component mass reduction of 25,15% maintaining the mechanical strength necessary for the appropriated component performance when incited

A utilização de sólidos geométricos com alunos do ensino fundamental

This research analyzed if the interactions between teacher and student, and among students, with the use of manipulative materials in the Mathematics teaching in a middle school class and provided the comprehension of the subjects worked. The analysis of the results was based in Vygotsky’s socio-historical theory, that prioritizes the interactions in learning-teaching process. The results of this research showed that these interactions mediated by the use of such materials provide the student with the motivation needed to take part in the math classes as an active actor in his development process, as well as understanding the concepts

Caracterização geológica da terminação norte do Domo de Ambrósio - Bahia

The Ambrósio dome is a granodioritic batholiths of elliptical geometry, 40km length in the N-S direction and variable width of up to 8 km, has a weakly deformed nucleus with intensely deformed margins, in its northern portion is intruded in orthogneiss that belong to the Archean basement, and its southern part comes in direct contact with the volcano-sedimentary sequence of Paleoproterozoic Rio Itapicuru Greenstone Belt (RIGB), Bahia. From geological mapping on 1:25:000 scale were recognized two structural domains, termed West Domain and East Domain. From investigation of these domains was identified a major shear zone, which puts in contact two distinct stratigraphic sequences, one west, consisting primarily of metavulcanic and metapyroclastic rocks with records of low-grade regional metamorphism, and east discontinuity a metassedimentary domain, with record of gradational contact metamorphism, deformation and compression generated from the rise of Ambrosio Pluton. Such records put into question the structural and stratigraphic models in the literature so far