The thrombocyte aggregation process in the turtle Phrynopys hilarii (Chelonia). An ultrastructural study

This study investigates the thrombocyte aggregation process in the South American fresh water turtle (Phrynopys hilarii) using electron microscopy. Blood was taken from surgically exposed lateral neck vessels often turtles Phrynopys hilarii during the spring and summer seasons, when the mean temperature is 37°C. Blood samples were fixed with Karnovsky solution for processing by transmission electron microscopy. The turtle thrombocytes were spindle-shaped with lobulated nuclei. Prominent vesicles and canaliculi were found throughout the cytoplasm. The cytoplasm organelles showed an agranular endoplasmatic reticulum, Golgi complex near the centrioles and scattered free ribosomes. These cells are similar to bird thrombocytes but distinct from fish and frog thrombocytes. Blood clotting time was 5 min ± 30 sec measured by the Lee and White method. Structural alterations resulting from the aggregation process occurred after activation. Thrombocytes developed numerous filopodial projections, an increased number of vacuoles and changed from spindle to spherical shape. P. hilarii thrombocytes have different morphologic characteristics compared to other non-mammalian vertebrate cells. These cells can participate in the aggregation process, as observed in birds.

Distribuição sazonal de parasitos branquiasis em diferentes especies de piexes em pesque-pague do municipio de Guariba-SP, Brasil.

This study was accomplished with the objective of knowing the seasonal distribution of the main species of parasites causes of branchial damages to the fish from fee-fishing at Guariba, State of São Paulo. This city is situated at 21 degrees 15'22'' S, 48 degrees 18'58'' W, in altitude 595 meters. This research was conducted between April, 1997 to March, 1999. From 408 fishes examined, 29.1% of them were infested by the protozoans e metazoans. Leporinus macrocephalus showed the highest parasitism by Trichodina sp., although Piaractus mesopotamicus and Cyprinus carpio were also parasited. Piscinoodinium pillulare infestation were found in L. macrocephalus, P. mesopotamicus, C. carpio e Colossoma macropomum. Monogenetics metazoan have largely been observed in L. macrocephalus, P. mesopotamicus, C. carpio, C. macropomum e cross-bred tambacu. The incidence of this parasite was elevated in the summer for L. macrocephalus, spring for P. mesopotamicus and C. macropomum, and both seasons for cross-bred tambacu. Lernaea cyprinacea copepodes were observed in L. macrocephalus, P. mesopotamicus, C. carpio and cross- breeding tambacu, in spite of the fact that C. carpio has demonstrated high parasitism of adult form. The fish L. macrocephalus, P. mesopotamicus and C. carpio were sponged intensely by Dolops carvalhoi, in situation of high population density. Piaractus mesopotamicus was considered the species more parasited by myxosporídeos, that were also observed in L. macrocephalus and cross-breeding tambacu.

Tensile bond strength of self-etching versus total-etching adhesive systems under different dentinal substrate conditions

The use of acid etchants to produce surface demineralization and collagen network exposure, allowing adhesive monomers interdiffusion and consequently the formation of a hybrid layer, has been considered the most efficient mechanism of dentin bonding. The aim of this study was to compare the tensile bond strength to dentin of three adhesive systems, two self-etching ones (Clearfil SE Bond - CSEB and One Up Bond F - OUBF) and one total-etching one (Single Bond - SB), under three dentinal substrate conditions (wet, dry and re-wet). Ninety human, freshly extracted third molars were sectioned at the occlusal surface to remove enamel and to form a flat dentin wall. The specimens were restored with composite resin (Filtek Z250) and submitted to tensile bond strength testing (TBS) in an MTS 810. The data were submitted to two-way ANOVA and Tukey's test (p = 0.05). Wet dentin presented the highest TBS values for SB and CSEB. Dry dentin and re-wet produced significantly lower TBS values when using SB. OUBF was not affected by the different conditions of the dentin substrate, producing similar TBS values regardless of the surface pretreatments.

Comparação de métodos para determinação da estabilidade de agregados por vias seca e úmida em diferentes sistemas de uso e manejo do solo

The purpose of the work is to evaluate the stability by dry and humid of theaggregate in different systems or the use and management in Argissolos: agricultural, pasture and torest utilization. This work was realized in agricultural property, in Anhumas city, SR Several analyses including percentage of the aggregate (by way of dry and humid); the weighted mean diameter of the aggregate calculation and statistic analysis. Conclusion: the organic matter content of the A horizon of the soil under forest is 64 % more than the soil under pasture and 79 % more than the soil under annual crop; the WMDA of the aggregate obtained by dry and humid ways of the horizon A and its mean value for the soil decrease in the following sequence: PVAd - forest > PVe -pasture > PVd - annual culture, respectively, with the following values: 1.33560 and 1.445496 (D), 2.81114 and 2.351380 (H); 0.66748 and 1.011830 (D); 2.79642 and 1.624250 (H); 0.32468 and 0.993775 (S), 1.25808 and 0.983135 mm (H); the two methods are equally sensitive to reveal the effect of the soil use and management; the organic matter provides additional stability to the aggregates submitted to humid sieving and clay to the dry sieving: the WMDA obtained by dry and humid ways are statistically different for the soil profiles.

Análise de superfície de tendência aplicada à chuva, medida por radar meteorológico, nas regiões de Assis e Piracicaba, SP

This paper presents the results from lineal trend surface analysis technique application. The purpose was to detect positive and negative anomalies in the rain measure distribution obtained by the meteorological radar Doppler, band S, located in Bauru, during the period of 21 of October/2004 to 29 of April/2005 in the areas of Assis and Piracicaba. Using three Z-R radar relations for rain quantification was chosen the specific equation Z = 32R1,65, as the best one. The results showed that the applied methodology was able to indicate the space distribution of the rain accumulated, identifying and locating the regions where there was rainy excess and rainy lack during each analyzed period. Such results indicate areas with larger pluvial impact and consequently more favorable for environmental damages.

Efeito de níveis de fósforo no crescimento inicial, biomassa e atividade in vivo da fosfatase ácida em Lychnophora ericoides Mart

The effect of phosphorus levels on seedling growth, dry and fresh matter production, and in vivo acid phosphatase activity was studied in Lychnophora ericoides cultivated during 130 days after transplanting in a greenhouse. Experimental design was completely randomized, with four P 2O 5 levels (0; 40; 80; 160 mg dm -3 as triple superphosphate) and five replicates of four plants each. The used soil was dystrophic acid dark red latosol. Lychnophora ericoides is responsive to phosphate fertilization with modification in daily relative growth rate, dry matter production and distribution among the plant parts. Acid phosphatase activity had significant and negative correlation with total, leaf and stem dry matter production, as well as with P levels accumulated in the leaf tissue. On the other hand, acid phosphatase activity had significant and positive correlation with root/shoot ratio.

Durability of the bond strength of self-adhesive resin cements to human dentin

This study subjected two self-adhesive resin cements and two conventional resin cements to dry and aging conditions, to compare their microtensile bond strengths (MTBS) to dentin. Using four different luting systems (n = 10), 40 composite resin blocks (each 5x5x4 mm) were cemented to flat human crown dentin surfaces. The specimens were stored in water for 24 hours (37°C), at which point each specimen was sectioned along two axes to obtain beams that were divided randomly into two groups: dry samples, which were tested immediately, and samples that were subjected to accelerated aging conditions (12, 000 thermocycles followed by storage for 150 days). The μTBS results were affected significantly by the luting system used (P < 40001). Only the μTBS of Rely-X Unicem was reduced significantly after aging; the μTBS remained stable or increased for the other self-adhesive resin cement and the two conventional cements.

Durability of feldspathic veneering ceramic on glass-infiltrated alumina ceramics after long-term thermocycling.

This study compared the bond strength durability of a feldspathic veneering ceramic to glass-infiltrated reinforced ceramics in dry and aged conditions. Disc shaped (thickness: 4 mm, diameter: 4 mm) of glass-infiltrated alumina (In-Ceram Alumina) and glass-infiltrated alumina reinforced by zirconia (In-Ceram Zirconia) core ceramic specimens (N=48, N=12 per groups) were constructed according to the manufacturers' recommendations. Veneering ceramic (VITA VM7) was fired onto the core ceramics using a mold. The core-veneering ceramic assemblies were randomly divided into two conditions and tested either immediately after specimen preparation (Dry) or following 30000 thermocycling (5-55 oC±1; dwell time: 30 seconds). Shear bond strength test was performed in a universal testing machine (cross-head speed: 1 mm/min). Failure modes were analyzed using optical microscope (x20). The bond strength data (MPa) were analyzed using ANOVA (α=0.05). Thermocycling did not decrease the bond strength results for both In-Ceram Alumina (30.6±8.2 MPa; P=0.2053) and In-Ceram zirconia (32.6±9 MPa; P=0.3987) core ceramic-feldspathic veneering ceramic combinations when compared to non-aged conditions (28.1±6.4 MPa, 29.7±7.3 MPa, respectively). There were also no significant differences between adhesion of the veneering ceramic to either In-Ceram Alumina or In-Ceram Zirconia ceramics (P=0.3289). Failure types were predominantly a mixture of adhesive failure between the veneering and the core ceramic together with cohesive fracture of the veneering ceramic. Long-term thermocycling aging conditions did not impair the adhesion of the veneering ceramic to the glass-infiltrated alumina core ceramics tested.

Período total de prevenção a interferência das plantas daninhas na cultura da alface cultivar Solaris

This research work aimed to determine the total period of interference of weeds prevention of lettuce cultivar Solaris. The experiment was conducted in Universidade Estadual de Londrina, in the period of autumn/ winter of 2008. The lettuce crop remained free from weed interference from emergence up to 0, 10, 20, 30, 40, 50 e 60 days. The experiment was arranged in a randomized block design with four replications. The weed community was composed by Bidens pilosa, Amaranthus hybridus, Oxalis corniculata, Euphorbia heterophylla, Spinacia oleracea, Commelina benghalensis e Lepidium virginicum. It was determined dry and fresh matter of weeds, and number of lettuce leaves. Assuming a tolerance of 5% for crop production decrease, it was verified that the total period of interference prevention (TPIP) occurred up to 21 days after transplanting. Weed interference throughout the crop cycle reduced 25% of its yield.

Número de perfilhos do capim-braquiária em regime de lotação contínua

The study was conducted to identify, through assessments of tillering, appropriate management strategies for Brachiaria decumbens cv. Basilisk under continuous stocking with cattle. Two management strategies were studied: pasture with 25 cm throughout the experimental period, and pasture with 15 cm in winter and 25 cm in spring and summer. A split-plot and randomized block design with four replications were adopted. The management strategies represented the primary factor, and the seasons (winter, spring and summer) were the secondary factor. The lowest balance between rates of appearance (TAR) and mortality (TMR) of tillers and the lowest number of vegetative tillers occurred in winter. In spring and summer, the balance and number of vegetative tillers were higher and did not differ. The lowering of pasture in winter resulted in greater balance between TAR and TMR and higher number of tillers in relation to management on sward fixed at 25 cm. There were greater numbers of reproductive and dead tillers in summer and winter, respectively. The pastures with fixed height of 25 cm contained a higher number of dead tiller. Under continuous stocking, the lowering of B. decumbens pasture in winter and its increase to 25 cm in spring and summer optimizes turnover of tillers.

Programação, conexão e avaliação de psicrômetro aspirado de termopar de baixo custo em micrologger para estudos agrometeorológicos

As the psychrometric method is considered standard for the measurement of relative humidity, many studies have used aspirated thermocouple psychrometers connected to microloggers but, however, they do not detail how the aspiration of the air stream is done. However, one of the major difficulties of aspirated thermocouple psychrometers is to program and to connect it in micrologger, because specific programming and connection are requires, and still some skills in getting accurate measurements. This work aimed to provide the programming and the connection of the aspirated thermocouple psychrometer type T for the CR10X microloggers and CR23X of Campbell Scientific, evaluating the quality of measurements of temperature and air relative humidity in relation the a sensor Vaisala HMP50. The non-continuous measurements were made in the period 2006/09/04 to 2007/07/11 at Jaboticabal, SP. The air temperature measurements were similar between the Vaisala sensors and aspirated thermocouple psychrometer, but the relative humidity measurements were significantly different. The measurements obtained by the aspirated thermocouple psychrometer connected to CR10X micrologger were the most accurate. Using the programming and connection of a micro-fan to suck in the dry and moist bulbs of aspirated thermocouple psychrometer in microloggers models CR10X and CR23X, it is possible to obtain measurements of air temperature with good precision and accuracy, and measurements of air relative humidity with good precision, but accuracy is not always attainable due to the difficulties inherent to the physical processes that occur in the wet bulb, the skill in the use and maintenance of this equipment and the reservoir protection against radiative effects.

Allelopathic effect of the peel of coffee fruit

In coffee (Coffea arabica)-producing areas, particularly in the southeastern region of Brazil, it is part of the agricultural practice to incorporate coffee fruit peels in organic substrates for the production of vegetables, fruit trees, and even in the coffee cultures, for use not only as an organic amendment but also as a way to control weeds. This study aimed to evaluate the allelopathic potential of dry and fresh coffee fruit peel extracts. Therefore, lettuce, Malaysian cabbage and beggar's tick seeds and seedlings were used as test subjects for the pre-emergence, post-emergence, and mitotic index of meristematic root cell tests. Additionally, the extracts' contents of phenols, flavonoids and caffeine, in addition to their antioxidant activity, were determined. The development of all the tested seedlings was inferred by the extracts from their roots and hypocotyls. The mitotic index was reduced in comparison to the negative control. A considerable quantity of phenols, flavonoids and caffeine was found in both of the extracts. A progressively growing antioxidant activity of the extracts was observed as their concentrations increased. Through the results obtained in this study, it is possible to conclude that C. arabica has allelopathic compounds. © 2013 Elsevier B.V.

Use of slag/sugar cane bagasse ash (SCBA) blends in the production of alkali-activated materials

Blast furnace slag (BFS)/sugar cane bagasse ash (SCBA) blends were assessed for the production of alkali-activated pastes and mortars. SCBA was collected from a lagoon in which wastes from a sugar cane industry were poured. After previous dry and grinding processes, SCBA was chemically characterized: it had a large percentage of organic matter (ca. 25%). Solutions of sodium hydroxide and sodium silicate were used as activating reagents. Different BFS/SCBA mixtures were studied, replacing part of the BFS by SCBA from 0 to 40% by weight. The mechanical strength of mortar was measured, obtaining values about 60 MPa of compressive strength for BFS/SCBA systems after 270 days of curing at 20 °C. Also, microstructural properties were assessed by means of SEM, TGA, XRD, pH, electrical conductivity, FTIR spectroscopy and MIP. Results showed a good stability of matrices developed by means of alkali-activation. It was demonstrated that sugar cane bagasse ash is an interesting source for preparing alkali-activated binders. © 2013 by the authors; licensee MDPI, Basel, Switzerland.

Efeito da tosquia na temperatura corpórea e outros parâmetros clínicos em ovinos

The aim of this study was to determine the variation of the temperature after shearing in sheep under dry and hot environment conditions and to compare the temperature changes with variation in cardiac and respiratory frequencies, ruminal movements and hydration status. Twenty Suffolk unshorn ewes were studied. Physical examination was performed in all animals three times a day at 7:00 AM, 1:00 PM and 7:00 PM, during 42 days (22 days before shearing and 20 days after shearing). The skin temperature was measured by infrared thermometer over several surfaces of the body. Data were submitted to analysis of variance, for comparisons between groups (shorn versus unshorn) at each time, and the significant difference was evaluated at level of P<0.05 by Tukey test. The respiratory frequency was statistically significant at all times. When air humidity was high, the respiratory frequencies were low. The thermal stress was clear in sheep of this study, reflecting marked changes in cardiac and respiratory frequencies and rectal temperature. The respiratory frequency was the parameter more reliable to establish a framework of thermal stress in the unshorn sheep, with values on average three times higher than those reported in the literature. The heart rate monitors the thermal variation of the environment and is also an indicator of heat stress. This variation shows the Suffolk breed is well adapted to hot climates. The correlation between the body surface temperatures with environment temperature and air humidity was negative, as explained by the effect of wool insulation, i.e. even with an increase in environment temperature and humidity, the body temperature tends to maintain a compensating balance. In the shorn animals, the correlation between skin temperature with environment temperature and air humidity showed that the skin temperature increases when the environment temperature increases. The increase in the environment temperature does not affect the body temperature of unshorn animals due the insulating effect of the wool. However, when environment temperature rises, the presence of the wool starts to affect the thermal comfort as the heat absorption is larger than the capacity of heat loss. In this study, the best thermal stress indicators were the respiratory frequency and rectal and skin temperatures. The temperatures of the skin measured at the perineum, axillae and inner thigh were considered the most reliable.

Cover crop termination timing on rice crop production in a no-till system

Measuring shikimic acid accumulation in response to glyphosate applications can be a rapid and accurate way to quantify and predict glyphosate-induced damage to sensitive plants. The objective of this paper was to evaluate the effect of cover crop termination timing by glyphosate application on rice (Oryza sativa L.) yield in a no-till system. A factorial experiment, arranged in a split-plot design, was conducted for 2 yr. Treatments consisted of cover crops (main plots) and timed herbicide applications (subplots) to these cover crops (30, 20, 10, and 0 d before rice planting). There was a decrease in rice yield from 2866 kg ha-1 to 2322 kg ha-1 when the herbicide was applied closer to the rice planting day. Glyphosate application on cover crops increased shikimate concentrations in rice seedlings cultivated under palisade grass (Brachiaria brizantha), signal grass (B. ruziziensis), guinea grass (Panicum maximum), and weedy fallow (spontaneous vegetation) but not under millet (Pennisetum glaucum), which behaved similarly to the control (clean fallow, no glyphosate application). Glyphosate applications in the timing intervals used were associated with stress in the rice plants, and this association increased if cover crops took longer to completely dry and if higher amounts of biomass were produced. Millet, as a cover crop, allowed the highest seedling dry matter for upland rice and the highest rice yield. Our results suggest that using millet as a cover crop, with glyphosate application far from upland rice planting day (10 d or more), was the best option for upland rice under a no-tillage system. © Crop Science Society of America.