Parâmetros assistenciais em saúde bucal: comparação entre duas programações do atendimento clínico no serviço público

Objective: To compare two forms of scheduling clinical dental care for the oral health teams (OHT) included in the strategy of family health, regarding productive aspects of assistance. Methods: Two OHT worked concurrently, using two methods of clinical care: the parameter recommended by the Ministry of Health Ordinance No. 1101, 2002, which establishes 03 dental visits per hour (c/h) per team, and a Testing model, with 02 c/h, being each method applied for a period of 615 hours. The quantitative data was collected in OHTs’ daily production spreadsheets, covering the following items: the number of dental visits (initial, for maintenance and for emergency procedures), procedures performed, consumption of material and sterilization cycles. Data was compared and statistically analyzed through the BioStat 5.0 by applying the paired t-test (p <0.05). Results: Under the Ministerial method and the Testing model, were performed, respectively, 288 and 365 first dental visits, 921 and 686 return dental visits, 167 and 172 emergency dental attendances, with 469 and 110 fouls, 212 and 327 treatments were finished and 2501 and 3046 dental procedures were realized. Among eleven analyzed consumables, five were consumed in smaller quantities in the Testing model: gloves (9%), anesthesia (38%), anesthetic needle (34%), suture material (24%) and aspirators (11%), while the six remaining items presented similar consumption rates between the two models. Conclusions: The testing model revealed to be more productive and economical.

Perfil de acidentes envolvendo risco biológico em profissionais de saúde de Araçatuba-SP: uma caracterização dos envolvidos

Each year individuals have sought a better quality of life and work, in this case, the science of Bio-insurance needs to keep up with technological advances and the needs of society to minimize or eliminate the risks of accidents. This study evaluated the most common accidents involving health staff from 2007 to 2011 in Araçatuba-SP. 478 accidents were recorded, and 78.7% with percutaneous involvement, 9% with intact skin, 4% with no skin intact, with 7.3 mucous and 1.05% other types of exposures. Most accidents were caused by needles with lumen (68.0%), followed by other agents (14.1%), accidents with blades (8.5%) or needles without lumen (5.5%); 3.7% did not answer and 0.2% were accidents with glasses. When checking the condition in which the accident occurred, 26.0% did not specify, 25.1% occurred in the disposal and / or handling sharp objects, 12.0% at the time of drug administration, 6.9% puncture, 3.7% occurred during recapping the needle. These data show that the most common accidents are those involving needles with lumen and / or sharp objects and due to these factors, the industry of health materials have sought alternatives to minimize such accidents as needles with protective, vacuum collection . Thus, it appears that reporting accidents is important for the development of technical and / or safer materials for patients and health workers.

Influência do veículo na remoção da pasta tri antibiótica do canal radicular

Pós-graduação em Ciência Odontólogica - FOA

Critérios citológicos associados ao fenótipo luminal do carcinoma de mama

Pós-graduação em Patologia - FMB

Efeito de um tratamento com auriculoterapia na dor, funcionalidade e mobilidade de adultos com dor lombar crônica

Pós-graduação em Desenvolvimento Humano e Tecnologias - IBRC

Cálculo em elementos finitos das frequências naturais dos modos de flexão de uma linha de eixo de unidade geradora hidráulica em escala

Pós-graduação em Engenharia Mecânica - FEG

Avaliação convencional e estesiômetro: resultados controversos na avaliação sensitiva no câncer de mama

This study, clinical, prospective, randomized study was conducted from August 2004 to February 2008 in a convenience sample of 60 women who underwent breast surgery with axillary dissection, divided into two groups (n = 30). The GI (Guidance Kit with different textures, to perform at home) and GII (control). The objective was to analyze the effect of home orientation in patients after surgery for breast cancer complaining of numbness, evaluation, and the conventional esthesiometer. The surface sensitivity was assessed by monofilament Semmes-Weinstein and evaluation using conventional two test tubes with hot water (38 to 43o C) and cold (16 to 27o C), paintbrush, needle. The GI was subjected to 10 sessions and assessments in both 3 times. The M1 (pre intervention), the M2 (post-intervention) after 10 sessions of physical therapy intervention and M3 (washout) after 3 months the second time for assessment. The region targeted for evaluation and intervention was the sensory nerve dermatome intercostobrachial. In the test of Goodman (conventional assessment) there was improvement in both groups, the P1, during the thermal evaluation. The t-test of student (esthesiometer) there was improvement in P2 only in GI (p = 0.003) between points 1 and 2 while the time 3 (p = 0.121 and p = 0.733 respectively). It was concluded that there were divergent and opposite results after examining the effect of home orientation in the nerve dermatome intercostobrachial, evaluation, and the conventional esthesiometer.

Malignant epitheliod hemangioendothelioma of the thyroid: a case report

Primary malignant epithelioid hemangioendothelioma (MEH) of the thyroid is a rare neoplasia with only a few cases reported in the literature. We report a 75 year old man, who presented with a substernal goiter and compressive symptoms. Ultrasonographic evaluation revealed a hypoechogenic nodule in the left lobe, measuring 4.1 cm in maximum diameter, and associated gross calcifications. Fine needle aspiration yielded hemorrhagic material. A left thyroid lobectomy and isthmusectomy was performed. The surgical specimen contained a malignant epithelioid hemangioendothelioma measuring 6 x 4 x 3 cm that had infiltrated about 50% of the thyroidal parenchyma, and surrounded a necrotic nodule. Immunohistochemistry results corroborated the histopathological findings; staining was positive for AE1/AE3, CD31, CD34, factor VIII-related antigen, and Ki-67 expression. Because of the patient’s comorbidities, surgical complementation was not undertaken and he has been undergoing conservative treatment.

Desempenho e parâmetros ósseos de bovinos nelore submetidos ou não à suplementação fosfórica durante o período de confinamento

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação da teneurina-2 (Ten-2) nos astrócitos do córtex cerebral de ratos adultos após lesão mecânica. Estudo imuno-histoquímico e de expressão gênica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Propriedades físicas e mecânicas de cimentos de ionômero de vidro encapsulados e não encapsulados

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desenvolvimento de uma caixa de redução para veículo Baja SAE

A gear Box in a Baja SAE vehicle is required due to the objectives of the SAE competitions, which the vehicles are challenged to pass through different obstacles. A powertrain system has as the main objective the extension of the torque for the traction shaft of the vehicle, when compared to that one available in the engine. The Objective of this thesis is the description of a gear box project for a Baja SAE vehicle of the Piratas do Vale Team of Unesp Guaratinguetá. In the development of the thesis, a flowchart, developed by the team, was used, which includes a theory part and also the choice of shelf components. In this Project, the type of gearbox was chosen, besides the calculation of axles, gears, bearings and sealers, and software simulations were done for the critical parts. The transmission, developed in this thesis, is more complex than the current one used by the team, but the new one shows improvements, as a new reverse gear with high torque

Dispositivo de microdescargas em gases na pressão atmosférica

This work describes the development of an electro-mechanical micro-discharges device operating at ambient condition of pressure and temperature, capable to produce plasma jets for surface finishing. The discharges are produced through a needle shape electrode hollow cathode type by which flows the helium gas. The voltage applied on the electrode is provided for an AC/AC switching voltage converter of full-bridge topology. The converter is energized by a power line of 110/220 VAC, 60 Hz and gives a 1000 V peak-to-peak from 5 kHz to 40 kHz square waveform output. The output frequency is defined by a control signal provided by an external signal generator. The equipment setup includes output acquisition of voltage and current and a photo-detector for photo-electrical measurements, which allows an optical characterization of the plasma jet

Pulsar da Medusa: um experimento de criação cênica e estudo da expressividade do corpo-voz a partir dos fatores do movimento de Rudolf Laban

Pós-graduação em Artes - IA