Estudos estruturais e cristalização de complexos formados entre toxinas botrópicas e inibidores vegetais

This research presents a study of structural complexes formed between the bothropstoxin BthTX-I and PrTX-I and phospholipase A2 (PLA2s) inhibitor 12- methoxy-4-methyl-voachalotine (MMV) of Tabernamontana catharinensis and rosmarinic acid (Cv-RA) of Rosmarinus officinalis. For both were used cocrystallization experiments with the toxins and inhibitors. In the future, the experimental three-dimensional structures of these complexes will be obtained through the technique of crystallography. Simultaneously, construction occurred in silico of inhibitors Cv-RA and MMV and attempts of docking between these binders and protein structures. These theoretical data provide important information regarding the nature of interactions between inhibitors, toxins and structural changes induced by the protein molecule inhibitors. Therefore, the acquisition of this information has great value to identification, characterization and development (drug design) of compounds with great potential for biotechnology and drug use. Considering further and more relevant aplications, these compounds could be used to control symptoms in many cases of ophidic poisoning and also in combating of pathological processes (degenerative inflammatory diseases and auto-immune diseases, Alzheimer's disease, schizophrenia, among others) whose causes are related to molecules belonging to the same groups of proteins which are classified bothropstoxin that were studied in this project

Potenciais aves dispersoras de sementes das espécies vegetais zoocóricas da Mata da Bica, Botucatu - SP

The semidecidual forests, as tropical forests, presents zoochoric dispersal syndrome in the most of their plant species, with approximately one third of frugivorous species responsible for the seeds dispersal are birds. The bills width is a limiting factor, it must be equal or bigger than the seeds width, because the viable seeds dispersal depends on leaving the digestive system after been swallowed hole. Birds and plants inventorys were realized in a semidecidual Forest fragment, in Botucatu – SP, called Mata da Bica. After this, the birds consumers of fuits/seeds were selected (frugivorous, granivorous and onivorous) and also the zoochoric plants, both for building a possibilities matrix, to verify the potential seed dispersers according to the seeds and bills width. Going to the matrix end we can observe a decrease in the interaction possibillities, because the seeds width increases and the bills width decreases. It has been observed that 50,7% seeds could be dispersed by all listed birds, because the seeds were narrower than the narrowest bill. In the other way large seeded species, as Holocalix balansae and Hymemaea courbaril has shown only two possible dispersers: Trogon surrucura and Piaya cayana. There are no possible dispersers to Syagrus oleraceae in the matrix. The need for large birds or other animals that works as large seed disperses demand conservation efforts, since most of these animals need big and conserved areas for their life habits

Avaliação da atividade citotóxica de espécies vegetais em linhagens celulares humanas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desenvolvimento de metodologias analíticas para determinação de selênio, cobre e manganês por GFAAS em amostras de vegetais de cultura orgânica e convencional utilizando extração por ultra-som

No presente trabalho é proposto um método para determinação de cobre, manganês e selênio em amostras de vegetais de cultura orgânica e convencional utilizando ultra-som no processo de extração dos analitos e posterior quantificação por espectrometria de absorção atômica em forno de grafite (GFAAS). Utilizando como solução extratora HCl 0,10 mol L-1, as condições ótimas de extração estabelecidas foram: massa de amostra de 100 mg; granulometria da amostra < 60 m; tempo de sonificação de cinco ciclos de 40 s e potência de sonificação de 136 W. As determinações dos analitos por GFAAS foram feitas utilizando-se temperaturas de secagem de 90-250 oC, temperatura de pirólise de 1300 oC, temperatura de atomização de 2300 oC e temperatura de limpeza de 2800 oC. Foi utilizado como modificador químico nitrato de paládio co-injetado junto com as amostras e tungstênio como modificador permanente. A exatidão e precisão do método de extração proposto foram avaliadas utilizando-se padrão certificado Corn Bran, RM 8433 – National Institute of Standards and Technology. Os resultados obtidos pelo método de extração por ultra-som mostraram-se equivalentes aos obtidos pelo método utilizando-se mineralização ácida das amostras em forno de microondas. No entanto, a metodologia proposta diminui consideravelmente o tempo de análise, o que favorece a velocidade analítica. Além disso, a quantidade de resíduos gerados para o ambiente também é bastante minimizada

Obtenção e caracterização de compósitos via RTM com alta fração de fibras de carbono processados à temperatura ambiente

After confirming the high specific mechanical properties of composite materials by scientific studies conducted over the last decades, one of the challenges of this new class of materials is the ability to achieve mass production at a more affordable cost, which has become indispensable. The Resin Transfer Molding (RTM) is an excellent method for manufacturing composite materials. Despite being a process widely used by international companies in the production of high performance structural composites, only a short time the national aviation industry has shown interest in implementing this type of processing to more complex structures and greater structural responsibility. In aeronautical projects, the reproducibility and the relative low cost of this process, several studies have been performed in Brazil for learning and perfecting this technique. This process is suitable for producing polymer components both simple as complex geometry, and allows to achieve consistent thickness, with high quality finish and without limiting range. Polymeric composite components for the high mechanical stress applications such as aircraft structures, satellites, etc., require a strict control of volume fractions of the composite constituents, beyond the knowledge of their mechanical and thermal properties. Therefore, in this experimental work degree study on the mechanical, thermal and of porosity composites processed by RTM processed characterization was performed. This characterization was performed targeting a possible aerospace application of this composite material. For the production of composites, process equipment (RTM RTM injector Radius 2100cc) was used. The processed carbono/epoxy composites were characterized via flexure tests mechanically and thermally analysis via DMA, DSC and TGA. To determine the volume fraction of fibers, the composite samples were analyzed via matrix digestion (ASTM D3171) ... (Complete abstract click electronic access below)

Proposta de conector para ensaios de ligações CDE submetidas à tração perpendicular as fibras em madeira de pinus

The growth of urban population associated with the shortage of supply of public infrastructure such as hospitals, kindergartens, schools, among others, has reinforced the need to develop alternative methods that simplify the construction processes and allows for a reduction in these costs works. The conventional processes have increasingly been shown ineffective to solve the problem of demand for different types of urban and rural buildings. Given this fact, industrial construction processes can gain space and have proven to be highly interesting to solve the above problems, in particular, considering the cost-effective and time. Therefore, this study aimed to determine the influence of moisture on the strength of metal plate connections connectors (printed plate with teeth). For the sizing of the links between structural lumber using metal connectors with teeth prints; controlled process variables (drying of the wood and the different moisture contents), and finally found results and compare them with different literatures order to obtain a qualitative efficiency of the process. Some specimens had very low expectations, can be explained by the presence of bone marrow, and pre-existing cracks. Thus, the results were discarded for further analysis and more accurate results

Fibras naturais: características químicas e potenciais aplicações

This study has as objective determining the chemical properties that serve as the basis for potential scientific and technological applications of seven species of fibrous plants cultivated in Brazil, which are: Banana” (Musa spp.), “Coco” (Cocos nucifera), Curauá (Ananas erectifolius), Fique (Furcraea andina), Piteira” (Furcraea gigantea), Sisal(Agave sisalana) and “Taboa” (Typha domingensis). The tests for determining the percent dry completely, extractives soluble in cold water, in hot water, in sodium hydroxide 1% and in ethanol-toluene, and the percentages of ash, hydrophobicity, lignin, holocellulose and cellulose were performed at the Department of Environmental Sciences, Agronomy College (FCA) of UNESP – Botucatu, São Paulo State. It also presents a literature review about these fibers and their potential applications. Differences between the results obtained and those found by other authors are possibly explained by variations on the origin of plant material, the harvest season, the climate and soil where they were grown. However, the results and the methodology used, serve as a basis for further studies with natural fibers

Reciclagem de poliestireno expandido: compósito com fibras de algodão para a confecção de placas de circuito impresso

In this work polymeric composites reinforced with cotton fibers, from the textile industry, were developed in order to manufacture printed circuit boards. It was used expanded polystyrene (EPS) as a thermoplastic matrix by melting it. For the obtention of 10% and 15% of fiber volume fraction in cotton fibers composites, it was used wasted cotton fibers as an incentive of recycling and reusing of the domestic and industrial wastes as well as for Expanded Polystyrene(EPS). The mechanical properties of the composites were evaluated by tensile and flexural strength from standardized test methods. Composites were characterized by a Scanning Electron Microscopy (SEM), Thermogravimetry (TG/DTG), Differential Scanning Calorimetry (DSC) and dielectric analysis. The analysis of the results showed that fiber in the composite directly influenced in the thermal and mechanical properties

Reciclagem de poliestireno expandido: compósito com fibras de sisal para confecção de placas de circuito impresso

In this work polystyrene composites reinforced with recycled sisal fibers were processed, in order to apply in the manufacture of printed circuit boards. A thermoplastic matrix of recycled polystyrene was used, this material came from waste expanded polystyrene (EPS) used in appliance's packages. Composites were prepared with 15% and 25% of sisal fibers. To obtain the composites, wasted EPS and natural sisal fibers were chosen, to encourage recycling and reuse of household waste and also the use of renewable resources. The composites were analyzed by standard tensile and flexural test, in order to verify the mechanical properties of the material. The characterization of the composite was done by scanning electron microscopy (SEM) , thermogravimetry (TGA / DTG) , differential scanning calorimetry (DSC) and dielectric analysis . The analysis of the results showed that the percentage of fibers in the composite influences directly the thermal and mechanical properties. Plates with a lower percentage of fibers showed superior properties at a higher percentage. The composite material obtained is easy to process and it's use is feasible for the confection of printed circuit boards, considering it's mechanical, thermal and insulative properties

Efeito de reguladores vegetais no desenvolvimento de plantas jovens de Tabebuia avellanedae Lorentz ex Griseb

Tabebuia avellanedae Lorentz ex Griseb (ipê-roxo), Bignoniaceae, ocorre na Floresta Tropical Atlântica e é de grande importância, uma vez que, devido às suas propriedades medicinais e lenho de grande valor comercial, já esteve sob ameaça de extinção. A mistura de reguladores vegetais é conhecida como bioestimulante que pode incrementar o desenvolvimento vegetal, estimulando a divisão, a diferenciação e o alongamento celular. Assim, neste trabalho avaliou o efeito da aplicação da mistura de reguladores vegetais do grupo das auxinas, giberelinas e citocininas no desenvolvimento de plantas jovens de ipê-roxo. Os tratamentos foram: testemunha, GA4+7 + BAP 100 mg L-1, GA4+7 + BAP 200 mg L-1, GA3 + IBA + cinetina 0,5% e GA3 + IBA + cinetina 1,0% os quais foram aplicados 4 vezes em intervalos de 30 dias. O efeito dos tratamentos foi avaliado pelas medidas de altura das plantas, diâmetro do caule, número de folhas, massa seca das folhas, caule e raízes e avaliação de trocas gasosas. O tratamento com GA3 + BAP 200 mg L-1 foi aquele que apresentou maior efeito no crescimento das plantas. Já para as avaliações fotossintéticas o tratamento com GA3 + IBA + cinetina foi aquele que apresentou a maior taxa de assimilação de CO2

Efeito fitotóxico e potencial remediador de três espécies vegetais contaminadas com benzeno

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Identificação e avaliação da resistência antimicrobiana de leveduras em vegetais minimamente processados

The consumption of minimally processed vegetables has been growing due to consumer demand for products easy to prepare. As it is extremely manipulated, this product can be contaminated with spoilage organisms such as yeasts, that have the ability to decrease the shelf life of food. In this sense, seeking to concerns about the resistance of microorganisms to sanitation methods for food industries and given the need for more studies of the antimicrobial power of ozone, this study aimed to isolate and identify the yeasts present in minimally processed vegetables, and check their antimicrobial resistance to sodium hypochlorite and ozone. 84 samples of minimally processed vegetables were collected. From them, 47 yeast cultures were isolated and submitted for identification and testing of resistance to sodium hypochlorite sanitizers (50, 100, 200 and 400 ppm) and ozone (0.25 and 0.5 ppm). From the total yeast isolated, 85.1% corresponds to Cryptococcus laurentii, 12.8% to Arxula adeninivorans and 2.1% to Debaryomyces hansenii var. fabryii. All of them were resistant to the sanitizers sodium hypochlorite and ozone at all concentrations tested. Given these observations, some actions must be taken during processing to avoid contamination with deteriorative microbiota.

Estudo da superfície de fibras de carbono após tratamento de implantação iônica por imersão em plasma (3IP)

In this work, plasma immersion ion implantation (PIII) treatments of carbon fibers (CFs) were performed in order to induce modifications of chemical and physical properties of the CF surface aimed to improve the performance of thermoplastic composite. The samples to be treated were immersed in nitrogen or air glow discharge plasma and pulsed at −3.0 kV for 2.0, 5.0, 10.0, and 15.0 min. After PIII processing, the specimens were characterized by atomic force microscopy (AFM), scanning electron microscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). After CFs treatments, the CF/Polypropylene (PP) composites were produced by hot pressing method. Surface morphology of as-received CFs exhibited some scratches aligned along the fibers due to the fiber manufacturing process. After both treatments, these features became deeper, and also, a number of small particles nonuniformly distributed on the fiber surface can be observed. These particles are product of CF surface sputtering during the PIII treatment, which removes the epoxy layer that covers as-received samples. AFM analyses of CF samples treated with nitrogen depicted a large increase of the surface roughness (Rrms value approximately six times higher than that of the untreated sample). The increase of the roughness was also observed for samples treated by air PIII. Raman spectra of all samples presented the characteristic D- and G-bands at approximately 1355 and 1582 cm−1, respectively. Analysis of the surface chemical composition provided by the XPS showed that nitrogen and oxygen were incorporated onto the surface. The polar radicals formed on the surface lead to increasing of the CF surface energy. Both the modification of surface roughness and the surface oxidation contributed for the enhancement of CF adhesion to the polymeric matrix. These features were confirmed ... (Complete abstract click electronic access below)

Avaliação dos efeitos ambientais nas propriedades do compósito de poliamida 6,6/fibras de carbono

This graduation work done study of polyamide 6.6/composite carbon fibres, since its processing, characterization of the main properties. Besides the influence of temperature, UV radiation, salt spray and moisture on the mechanical and viscoelastic behavior. To achieve this goal, the first composite was processed from the heat compression molding using known variables of the process and using the empirical method to find the best value for other parameters. The method processing molding was chosen because it common in composites processing in order to evaluate the influence of crystallinity of the properties that influence the mechanical and viscoelastic behavior laminates. From the obtained laminate specimens were evaluated in weathering, such as: in hygrothermal chamber, UV, salt spray and thermal shock. In another step, the effect produced by these constraints were evaluated by optical microscopy, ultrasound, dynamic mechanical analysis and vibration tests. This project was conducted at the Department of Technology and Materials of UNESP in Guaratingueta, where all the equipment and techniques for the implementation of this project met available. After the tests proved the applicability of the composite polyamide 6.6/carbon fibers in aeronautical applications with resistance the main climatic influences