Luminescence of Eu3+ in the thin film heterojunction GaAs/SnO2

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Photoluminescence of the Eu-doped thin film heterojunction GaAs/SnO2 and rare-earth doping distribution

Tin dioxide (SnO2) thin films doped with Eu3+, are deposited by the sol-gel-dip-coating process on top of GaAs films, which is deposited by resistive evaporation on glass substrate. This heterojunction assembly presents luminescence from the rare-earth ion, unlike the SnO2 deposition directly on a glass substrate, where emissions from the Eu3+ transitions are absent. The Eu3+ transitions are clearly identified and are similar to the observation on SnO2 pressed powder (pellets), thermally treated at much higher temperatures. However, in the form of heterojunction films, the Eu emission comes along a broad band, located at higher energy compared to Eu3+ transitions, which is blue-shifted as the thermal annealing temperature increases. The size of nanocrystallites points toward quantum confinement or electron transfer between oxygen vacancies, originated from the disorder in the material, and trivalent rare-earth ions, which present acceptor-like character in this matrix. This electron transfer may relax for higher temperatures in the case of pellets, and the broad band is eliminated.

Index of thermal stress for cows (ITSC) under high solar radiation in tropical environments

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Heterojunction between Al2O3 and SnO2 thin films for application in transparent FET

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

The Priestley-Taylor parameter α for the Amazon forest

Priestley and Taylor provided a practical formulation of the partitioning of net radiation between heat flux and evaporation contained within a parameter α. Their model (PTM) needs verification under a range of environmental conditions. Micrometeorological data sets collected over the Amazon forest at the Ducke Reserve site (2°57′S; 59°57′W) gave an opportunity to evaluate α. Evidence presented here and by others shows that there is pronounced diurnal variation in α, with minimum values around midday and maximum values in the morning and evening hours. During unstable and stable conditions in the daylight hours, the Bowen ratio (B) varied from 0.10 to 0.57 and -0.71 to -0.08, respectively, whereas α varied from 0.67 to 1.16 and 1.28 to 3.12, respectively. A mean value of α = 1.16±0.56 was obtained from daytime hourly values for two days. The daily data sets from three expeditions gave a mean of α = 1.03±0.13. This work confirms that α is a function of atmospheric stability over the Amazon forest. Thus the PTM should be applied with caution over time-intervals of one day or less because of the sensitivity to variation in α. The calculated values of α are in general agreement with those reported in literature. © 1991.

Distribution of the root system of peach palm under drip irrigation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Artifactual oxidation of cholesterol during the analysis of cholesterol oxidation products: protective effect of antioxidants

To study the influence of the addition of various antioxidants and their combinations on the artifactual oxidation of cholesterol during analysis, 2 factorial experiments were performed in duplicate. In the first experiment, 2 amounts of the following antioxidants were assayed: ethylenediaminetetraacetic acid (EDTA) disodium salt (0 and 1 mg), pyrogallol (0 and 600 microg), and butylated hydroxytoluene (BHT; 0 and 600 microg); in the second, EDTA disodium salt (0 and 1 mg), ascorbyl palmitate (0 and 600 microg), and BHT (0 and 600 microg). Under low oxidative conditions of dim light, evaporation of solvents at low temperatures, and cold saponification in darkness under nitrogen atmosphere, the addition of antioxidants showed no further protective effect. Furthermore, the presence of ascorbyl palmitate significantly increased the formation of cholesterol-5beta,6beta-epoxide, and 7beta-hydroxycholesterol.

Anuran skin and basking behavior: the case of the treefrog Bokermannohyla alvarengai (Bokermann, 1956)

We investigated the morphology of the skin and the biochemistry of the lipids in the skin secretion of Bokermannohyla alvarengai, a montane treefrog that is known to bask regularly, motionless in full sunlight for extended periods of time. Our primary goal was to identify structural and biochemical modifications that might assist this frog species to accommodate the conflicting demands for heat exchange and water balance while basking. The modulation of heat exchange in basking B. alvarengai involves changes in skin coloration. We found that this response was supported by a prominent monolayer of large iridophores, whose light reflectance property is adjusted by the response of intervening melanophores. Mucosubstances and lipid compounds, mainly consisted of saturated fatty acids and presumably secreted from granular glands, were detected on the skin of B. alvarengai. These compounds formed an extra-epidermal layer over the animal's dorsal surface that might assist in the prevention of excessive water loss through evaporation. Additionally, we found well-developed skin folds at the ventral region of the frogs that lead to an increment of surface area. This feature combined with the extensive hypervascularization, also noticed for the skin of B. alvarengai, may play an important role in water reabsorption. The suite of structural and biochemical modifications identified for the integument of B. alvarengai seems to conjugate aspects relevant to both, heat exchange and water balance, allowing for this species to explore basking as an efficient thermoregulatory strategy. J. Morphol. 276:1172-1182, 2015. © 2015 Wiley Periodicals, Inc.

Thermoregulatory responses of goats in hot environments

Notwithstanding the solar radiation is recognized as a detrimental factor to the thermal balance and responses of animals on the range in tropical conditions, studies on the amount of thermal radiation absorbed by goats therein associated with data on their production and heat exchange are still lacking. Metabolic heat production and the heat exchange of goats in the sun and in the shade were measured simultaneously, aiming to observe its thermal equilibrium. The results showed that black goats absorb twice as much as the white goats under intense solar radiation (higher than 800 W m(-2)). This observation leads to a higher surface temperature of black goats, but it must not be seen as a disadvantage, because they increase their sensible heat flow in the coat-air interface, especially the convection heat flow at high wind speeds. In the shade, no difference between the coat colours was observed and both presented a lower absorption of heat and a lower sensible heat flow gain. When solar radiation levels increases from 300 to 1000 W m(-2), we observed an increase of the heat losses through latent flow in both respiratory and cutaneous surface. Cutaneous evaporation was responsible for almost 90 % of the latent heat losses, independently of the coat colour. Goats decrease the metabolic heat production under solar radiation levels up to 800 W m(-2), and increase in levels higher than this, because there is an increase of the respiratory rate and of the respiratory flow, but the fractions of consumed oxygen and produced carbon dioxide are maintained stable. The respiratory rate of black goats was higher than the white ones, under 300 W m(-2) (55 and 45 resp min(-1)) and 1000 W m(-2) (120 and 95 resp min(-1), respectively). It was concluded that shade or any protection against solar radiation levels above 800 Wm(-2) is critical to guarantee goat's thermal equilibrium. Strategies concerning the grazing period in accordance with the time of the day alone are not appropriate, because the levels of radiation depend on the latitude of the location.

Análise estrutural de aerogéis via espalhamento de luz a baixo ângulo

The sol-gel process is a method for obtaining vitreous or vitro-ceramic materials which, are prepared a sol and by drying the liquid phase. This technique has been used extensively for the preparation of glassy gels, films, fibers and particles from the hydrolysis and polycondensation reactions of metal alkoxides. The usual methods for drying are: evaporation drying (xerogels), freeze drying (criogéis) and via supercritical CO2 extraction (aerogels). In the present work, we studied the preparation of silica gels by the sol-gel process from the hydrolysis of alkoxides tetraethylorthosilicate (TEOS) and 3-glycidoxypropyltrimethoxysilane (GPTS). The hydrolysis was promoted from GPTS and TEOS in proportion (4: 1) under acidic conditions. The hydrolysis reaction was promoted inside a Becker at room temperature. After hydrolyses the prepared sol had pH 2, and kept under mechanical agitation for a period of 1 hour. In order to accelerate the polycondensation reaction, the pH was corrected to a value near 5 by slowly adding NH4OH. Then the sols were leaked in sealed polycarbonate containers and maintained for 20 days at 40°C for gelation. Silica aerogels were prepared via supercritical CO2 extraction of the wet gel at temperature and pressure higher than 31°C and 74 atm, in an autoclave specially developed for the process. The structural characteristics were studied in the dry gel (aerogel). Aerogels were then characterized by nitrogen adsorption and small angle light scattering. The nitrogen adsorption data were analyzed for the determination of the BET specific surface (SBET), the total pore volume Vp, the pore mean size (lP=4Vp/SBET), the particle mean size (lS) and the pore size distribution (PSD). And the data from small angle light scattering were analyzed to determine the correlation function (γ'), the area per unit volume (S/V), average pore size (l ) and the average particle size...

Desenvolvimento e caracterização de dispositivos eletroluminescentes contendo uma blenda polimérica condutora e Zn2SiO4:Mn

Despite the great development of organic and polymeric electroluminescent materials, the large scale commercial application of devices made with these materials seems conditioned to specific cases, mainly due to the high cost and the low durability, in compared to conventional technologies. In this study was produced electroluminescent devices by a process simple, drop casting. Were produced electroluminescent films containing Zn2SiO4:Mn immersed in a conductive polymer blend with different thicknesses. The morphological characteristics of these films were studied by scanning electronic microscopy. These films were used in the manufacture of electroluminescent devices, in which the light emission properties of the developed material were evaluated. The blend was composed of the conductive polymer Poly(o-methoxyaniline), doped with p-toluene sulfonic acid, and an insulating polymer, Poly(vinylidene fluoride) and its copolymer Poly(vinylidene fluoride-cotrifluoroethylene). To this blend was added Zn2SiO4:Mn, thereby forming the composite. A first set of devices was obtained using composites with different weight fraction of polymeric and inorganic phases, which were deposited by drop casting over ITO substrates. Upper electrodes of aluminum were deposited by thermal evaporation. The resulting device architecture was a sandwich type structure ITO/ composite/ Al. A second set of devices was obtained as self-sustaining films using the best composite composition obtained for the device of the first set. ITO electrodes were deposited by RF-Sputtering, in both faces of these films. The AC electrical characterization of the devices was made with impedance spectroscopy measurements, and the DC electrical characterization was performed using a source/ meter unit Keithley 2410. The devices light emission was measured using a photodiode coupled to a digital electrometer, Keithley 6517A. The devices electrooptical characterization showed that the...

Fabricação e caracterização de diodo Schottky orgânico com arquitetura planar

Usually organic polymeric diodes are made with a semiconductor layer placed between two electrodes in a sandwich-like architecture, where the electrodes are deposited on the surfaces of a polymeric semiconductor film. This methodology leads to two main problems: i) the polymeric film top surface is rough and irregular, resulting in non-uniform electric field into the device; ii) during the deposition of metallic electrode in the top surface polymeric film, by thermal evaporation, occurs the diffusion of metal atoms into the polymeric film, changing the material electronic structure. Thus, the metal-semiconductor junction is not well defined, which is essential for the production of good quality Schottky diode, which exhibits ideality factor close to the unity and low turn-on voltage. In order to avoid these two problems, in the present research was proposed to manufacture an organic diode with the semiconductor polymeric layer deposited over bimetallic (gold and aluminum) interdigitated electrodes. The doping of the active layer was performed by immersing the device in hydrochloric acid solution with pH 2 during different times in order to promote different doping levels of the semiconductor polymer. Was verified that the proposed diode, which exhibits well-defined metal-semiconductor junction, operates as a Schottky diode, with good ideality factor, 10 ± 3, and low turn-on voltage, 1,2 ± 0,2 V, in comparison with conventional organic polymeric diodes. Contrasting with the ideality factor and turn-on voltage, the diode rectification ratio was obtained as 7, a value lower than the expected for a good organic diode. Was also showed that the diode characteristics were dependent on the semiconductor polymer doping level, and that the diode characteristics were optimized with doping promoted by immersion in the acid solution for times longer than 50 s. Furthermore, as was showed that the diodes properties are dependent on the semiconductor...

Soft color enhancement of the production of J/psi's by neutrinos

We calculate the production of J/ψ mesons by neutrino-nucleon collisions in fixed target experiments. Soft color, often referred to as color evaporation effects, enhances production cross sections due to the contribution of color octet states. Though still small, J/ψ production may be observable in present and future experiments such as NuTeV and μ colliders. ©2001 The American Physical Society.

Crystallization process of amorphous GaSb films studied by Raman spectroscopy

Thermal annealings of amorphous gallium antimonide films were accompanied using Raman spectroscopy, both for stoichiometric and nonstoichiometric compositions. The films were prepared by flash evaporation on silicon substrates. Structural changes were induced by the heat treatments: an increasing degree of crystallization as a function of the annealing temperature is observed. Sb clusters are found to crystallize before GaSb does, and the dependence of the corresponding Raman peak intensity with the annealing temperature (occurring in two regimes) is explained. A mechanism for the crystallization of the amorphous GaSb is proposed, based on the prior migration of the Sb excess outside the GaSb region to be crystallized. © 1995 American Institute of Physics.

Preparação e caracterização de óxido de alumínio anodizado sobre substratos transparentes

Pós-graduação em Ciência e Tecnologia de Materiais - FC