Previsão da demanda doméstica da aviação comercial européia

This paper work has as objective the study and forecasting of the demand behavior for the European commercial aviation industry. Once economy and demand has a straight relationship, the tool chosen to perform this forecast was the Econometry. In order to get a more efficient forecast, a complete analysis of the environment in which the aviation sector is, to understand all factors with influence over the market as a whole. Only then, the variables which would be tested for the correlation with the demand were picked. The final results of this study has achieved all objectives set and has given a better view over the European Commercial Aviation Market

Avaliação da produtividade no trabalho organizado em turnos em uma empresa vidreira

Work organized in shifts, either for technological, social or economic imposition, allows the best use of means of production, increasing the overall productivity of the enterprises. At the same time, this type of work harms the individual productive capacity of workers, particularly those involved in the night shift. The objective of this work was to assess the behaviour of production in a continuous line and subjected to work organized in shifts. Through the statistical method of analysis of variance, Spearman's test and Tukey's method, was analysed the distribution of the productivity index measured in three fixed shifts of work in a glass company. The productivity index, provided by the integrated management system of the company, refers to the ratio of actual productivity to total productivity. The statistical analysis shows that factors of production, such as allocation of workers, do not interfere with productivity, showing an unexpected pattern, where the average productivity for the three shifts are close and the correlation between the number of workers on the line and productivity is low. The conditions of production had an adverse work environment with exposure to noise, heat, vaporized mist of lubricating oil and risk of accidents. The findings show that the calculation of productivity in use is limited and its use in company’s production control may produce distortions. It is proposed to examine alternative calculations methods that consider the overall productivity

Método de Taguchi aplicado a um processo de corte por fusão de um tecido sintético

A company must have full knowledge and control of its operations so as to meet the market requirements and meet their production goals. Thus this paper uses the Taguchi method to extend the operational control of a cutting process by fusion of a synthetic fabric in the longitudinal direction. For process analysis and tracking of possible causes of the problem techniques of Production Engineering as the cause and effect diagram, also known as Ishikawa diagram, and design of experiments were used, the last one was applied to the design techniques of Taguchi. Finally the preparation method of understanding and design of experiment was due to the use of the software MINITAB v15 ®, which showed that the speed of rolling the fabric after cutting is crucial for controlling the entire operation

Proposta de um processo de categorização de fornecedores para a execução de projetos

Nowadays, in business environment, organizations seek to differentiate through special programs and plans, taking the concepts of sustainability, performance and benefits generated for society. Based in this competitive environment, as companies depend on the use of subcontractors to perform services for your different customers, the work performed by them is directly related to the vision created by the final customer’s vision of the company responsible for the project. Considering that the supplier hired to execute the project does not share the strategic concepts related to the level of services to be offered to the final customers, thus creating the need to develop methods that enable the alignment between the project owner, responsible for preparing the executive project, and the supplier, responsible for the execution of the work. Tangent to this need, it was necessary to create a method of evaluation and categorization for suppliers to hired for the projects. As a result it has been proposed a process of categorization of suppliers, through the restriction of possible companies to be hired for a project designed to promote alignment between strategies and continuous improvement of the solutions offered to the market

Modelo para definição do kit de horas de montagem de aviões

This work was done a study to develop a model for definition of hours assembling planes, that were able to meet both the most complete plane, i.e. with the highest number of mounts but also that do not generate an idleness on the line when a plane less complex passing on the Assembly line. The proposed model has great advantages over the current model that the company has been using, as for example: leftover hand-to-hand for assembling airplanes only 10% than the current model raises and an expense to pay the human resource/time of only 6.7% compared with the current model at the company

A obtenção de ganhos produtivos e diminuição dos desperdícios com a implementação de manufatura enxuta em uma indústria metalúrgica

This work was developed with the aim of explaining the real benefits of using the concept of Lean Manufacturing in a Metallurgical Industry. Through this will highlight the strategies and real gains from the use of this methodology and therefore, the tools of Production Engineering that were used in the implementation of Lean Manufacturing, in order to improve processes in various aspects such as reduced handling, standardization of production, reduced time used in machine setup. Practical methods applied for the purpose of reducing waste become apparent. Also highlighted will be the real difficulties encountered in the implementation of Lean Manufacturing

Utilização do método de tomada de decisão multicritério PROMETHEE II para priorização do plano de ação de redução de custos de manutenção

In the last years, the maintenance took an essential role inside the productive system. Plan and manage the maintenance actions in an efficient way, are vital activities for higher production availability. This paper presents an application of a Multicriteria Decision Analysis method in a chemical industry, willing to priories a plan action for the reduction of the maintenance cost. The method used was the PROMETHEE II, with it the results were obtained through the softwares Microsoft Excel and Decision Lab

Aumento da precisão do controle de estoque: pesquisa ação em indústria de bens de consumo

This work is an action research conducted in an industry of consumer goods, presenting a new model of inventory management in the company's processors. This replacement of the inventory management of the company stemmed from the need to reduce the large number of deviations in the product write off in stock, thereby generating a low accuracy and reliability of data on inventories of processors shown by the company's ERP system. Spending on inventory adjustments could thus be reduced with the implementation of the new model, thus generating a cost savings for the company and thus increasing their competitive potential in the market. In the old system adopted by the company, write off raw material inventory was done automatically by the system for customized transactions by the company. However, since the implementation of ERP in the company, the automatic write off based on historical consumption of each product were made in many cases at random, generating a lot of mistakes. The new management system has replaced the automatic system by manual at the time of the return of the processed product in the company, thus creating a control which lots and quantities were consumed in the processing and making the stock shown by the ERP reliable and accurate

Implantação da ISO 9001:2008: estudo de caso em empresado setor de construção civil

In Brazil , the construction industry is on an upward trend, mainly by the housing shortage , and yet there are few builders that take a Quality Management System ( QMS ) to improve the quality of its services and processes . The ISO 9001 standards are guidelines for an effective QMS and this certificate is recognized worldwide as a seal of quality standard. This paper will describe and analyze the implementation of a QMS in a small construction company of Guaratinguetá - SP, identifying best practices and major difficulties , besides proposing preparatory recommendations for other companies that seek the ISO 9000 certification. Access to company’s data made the nonconformities and the customer satisfaction research analysis possible, and a questionnaire and unstructured interviews allowed a deeper understanding of the situation. Despite this ISO 9000 QMS not being fully implemented, the company has already conquered some improvements in document control, project planning, process traceability and established focus on customer

Gestão de gastos imprevistos no abastecimento de matéria-prima de uma fábrica

La performance desentreprises ça dépend, engrande partie, deses chaînesd’approvisionnement. Celas peuvent entretrès complexe, car elle implique tout le processus avant, pendant et après l’assemblage duproduit fini. Ce travaila donc comme objectifl’amélioration de lagestion des imprévus qu’arrivent audébutdela chaîne d’approvisionnement et lesimpacts sur l’approvisionnement de la ligne d’assemblage d’une usine. L’approche méthodologique utilisée est la recherche-action. De cette façon, ce travail présente une standardisation des processusquechaque département doit fairedans uncas de rupture dans la chaîne. D’après entretiens, analyses de document, standardisation des organigrammes et graphiques croisés dynamiques, ila été possible proposer un moyen plus critique d’analyser et résoudre certains problèmes. En tant que résultats, viennent un organigramme défini, une divulgation des informations plus précises pour la prise en décision et unes l’analyse critique de l’historique des imprévus. Il s’agit d’un ensemble des processus meilleur pour une bonne prise en décision de court, moyen et long terme pour les dépenses avec des imprévus dans l’approvisionnement de matière-première de l’usine

A utilização de modelos matemáticos para a otimização de processos

This dissertation has as main theme the discuss about how the use of mathematical models for process optimization. The current scenario of strong competition to conquer the consumer market necessitates the development of improvements to better performance of the process as a whole, is to reduce costs, increase efficiency or effectiveness. Thus, the use of methodologies to assist in this process is becoming increasingly viable. Methodologies developed in the past are being studied and improved. An example is the Desirability, the object of the present study, which was developed in the 80's and has been improved over time. To understand and study this methodology was applied to the desirability function in three instances, where it was used Design of Experiments (DOE), taken from scientific papers, using the Solver tool (Excel ®) and desirability (Minitab ®). Thus, in addition to studying the methodology, it was possible to compare the performance of tools used for optimization in different situations. From the results of this study, it was possible to validate the superiority of one of the models studied compared fairly

Melhoria do nível de serviço no atendimento ao cliente por meio da estrutura direta de distribuição Transit Point

Increasingly competitive markets have driven the search for companies in many different ways to win and keep customers. The service level is basically the performance of companies in fulfilling the orders made, or how companies demonstrate to their clients efforts in their behalf. This work aims to solve the difficulties faced by a multinational company present in Brazil, in the distribution of its products in the category Ice Cream in order to improve the service level of their customers. Review the logistics network and concepts related to the distribution system of products is one of several ways to achieve this goal, as well as the use of IT and tools to assist in planning and programming of the physical distribution of products. In this study we used the concept of direct distribution system called Transit Point (TP). The TP provides at the same time, a strategy of rapid response, flexibility, low transportation costs and no inventory. A router - software capable of simulating the actual conditions experienced in the daily distribution - was used to assist in calculations. Results showed reductions of up to 47.5% in transportation costs and better conditions were provided in the distribution of products, positively impacting on service levels and in the maintenance of products quality, with a reduction of 1.6% of the total costs involve

Análise dos problemas de comunicação permeados pela cultura organizacional e estrutura de gestão de projetos em uma empresa na área da construção

In a supplier of building products were identified difficulties in communication between the Product Development area and other areas of the company that could spoil projects and processes. The process of product development is important in placing the company in the market, and through research and planning, design new products and seek to comply with the costumer in relation to deadlines, quality and cost-effective. The development of a product involves many areas in the company and communication is essential in this process. The goal of this study was to identify possible communication problems permeated by organizational culture and structure of project management working in the company. A survey was applied using a Likert scale in three different areas of the company, with questions including the topics: communication, culture and organizational structure of project management and subsequently conducted the median test and the Spearman test to analysis of responses. With the understanding and analysis of the survey it was confirmed the difficulties of communication between people and the areas of the company, besides there is an influence of the type of culture acting in the company and the current management structure of the project in a good performance of internal communication

Análise da recepção de um programa de transformação de cultura organizacional em uma empresa de tecnologia

The Organizational Culture has been in the spotlight in the last 25 years, studies show the influence of the culture in the production processes and in the strategy decisions of the companies. Changes in the organizational culture is necessary in key-moments of the corporation and this transformation moment influences directly the personal life and the professional life of the employees. The objective of this monograph is to verify the application of the “Transformation Program”, which is the changing program of a technology enterprise, and to attest the acceptation degree and the knowledge of the employees about the program, as well the main difficulties found by the company while implementing the project. Using a quantitative pool, the acceptation degree, the knowledge of the employees and their engagement with the Transformation Program were analyzed by checking the favorability of the answers and comparing the percentage of the whole company and its locations, besides with the results an understanding change curve was created, it identifies the stage that he employees are during the changing process. An interview with the actual and the previous program officers and two project managers was done, in order to identify their alignment with the theory and their perception about the difficulties found while applying the program. It was noted that the employees have heard about the Transformation Program and the majority is in the exploration phase of the understanding change curve, although it is necessary an special attention with the leaders, because the researches showed that the leaders are acting like a bottleneck in the communications by keeping the information that should be shared

Melhoria da qualidade de um processo de usinagem utilizando as técnicas de avaliação de Taguchi

Delivering to the customers a product or service with the expected quality associated to the huge competitiveness that exists in the market nowadays, has been making organizations increasingly focus on quality planning using techniques which are directed towards the continuous improvement process and production optimization. Thus, this paper aims to improve a machining process using the techniques of experimental design to the optimization and this also includes the analysis of the measurement system. For this purpose, the alloy Nimonic 80A, a nickel base superalloy, was used in the process due to its widespread use for high temperatures, applying this study the robust method proposed by Genichi Taguchi, determining the influence of the factors considered input variables, cutting speed, feed rate, depth of cut, type of tool, lubrication, and material hardness, in the output or response variable, surface roughness, concluding with the use of Taguchi orthogonal array L16 and by analysis of ANOVA that the factor feed rate is significant and offers greater effect on the response variable studied, should be set to 0,12mm/rev. Moreover, the factor type of tool has more influence on the process when compared to other factors, being CP250 the one more suitable to the process. Lastly, the interaction feed rate x cutting speed provides greater significance in the process regarding to surface roughness variable, being the best match between them 0,12mm/rev to the feed rate and 90m/min to the cutting speed. In order to evaluate the measurement system, it was applied the repeatability and reproducibility method (R&R), through which we saw that the system needs improvement (R & R = 88.04% >>> 30%) as the value found in the study was well above compared to the one that classifies the system as inappropriate