Solubilización de fuentes de fósforo asociadas a un compuesto orgánico enriquecido con biofertilizantes

The enrichment of an organic compound with biofertilizers of microorganisms (solubilizing phosphorus bacteria, BSF) can improve the properties of phosphate fertilizers applied to soils to increase nutrient availability. The experimental design was randomized complete blocks with a factorial 4x2 +1 arrangement of treatments: 1) four sources of phosphorus: phosphate rock, natural phosphate, triple superphosphate (TSP) and Cuban phosphate rock; 2) two sources of bio-fertilizer prepared from filter cake (cane waste) enriched with microorganisms and no enrichment; 3) and an absolute control (no filter cake or fertilizer); repeated three times. Data was analyzed with ANOVA and treatment means were compared using Tukey (p <= 0.05). Assessments of available P (Bray-2 and Oniani methodology) and the quantification of total and solubilizing bacteria and fungi in the soil were performed 30, 60 and 90 d after starting the experiment. After 60 d, the population of BSF was lower in the control (p <= 0.05) and the content of P (Bray-2) was higher for SFT (p <= 0.01). The application of the bio-fertilizer increased the P content compared to the control. At 90 d P (Bray-2) increased with the SFT treatment, which also increased (p P in the soil at 60 and 90 d regardless of the presence of microorganism-enriched bio-fertilizer. The use of filter cake enriched with microorganisms associated with different sources of P, and applied to the soil with a high content of P, did not change the soil populations of total and solubilizing bacteria and fungi in the short term. TSP promoted the highest levels of P in the soil, irrespective of the presence of the organic compound enriched with P solubilizing microorganisms.

Fabricação e caracterização de diodo Schottky orgânico com arquitetura planar

Usually organic polymeric diodes are made with a semiconductor layer placed between two electrodes in a sandwich-like architecture, where the electrodes are deposited on the surfaces of a polymeric semiconductor film. This methodology leads to two main problems: i) the polymeric film top surface is rough and irregular, resulting in non-uniform electric field into the device; ii) during the deposition of metallic electrode in the top surface polymeric film, by thermal evaporation, occurs the diffusion of metal atoms into the polymeric film, changing the material electronic structure. Thus, the metal-semiconductor junction is not well defined, which is essential for the production of good quality Schottky diode, which exhibits ideality factor close to the unity and low turn-on voltage. In order to avoid these two problems, in the present research was proposed to manufacture an organic diode with the semiconductor polymeric layer deposited over bimetallic (gold and aluminum) interdigitated electrodes. The doping of the active layer was performed by immersing the device in hydrochloric acid solution with pH 2 during different times in order to promote different doping levels of the semiconductor polymer. Was verified that the proposed diode, which exhibits well-defined metal-semiconductor junction, operates as a Schottky diode, with good ideality factor, 10 ± 3, and low turn-on voltage, 1,2 ± 0,2 V, in comparison with conventional organic polymeric diodes. Contrasting with the ideality factor and turn-on voltage, the diode rectification ratio was obtained as 7, a value lower than the expected for a good organic diode. Was also showed that the diode characteristics were dependent on the semiconductor polymer doping level, and that the diode characteristics were optimized with doping promoted by immersion in the acid solution for times longer than 50 s. Furthermore, as was showed that the diodes properties are dependent on the semiconductor...

Materiais híbridos de sílica/orgânico dopados com rodamina-B: estudo da luminescência e preparação de filmes finos para aplicações em fotônica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Propriedades ópticas e elétricas de materiais híbridos de sílica/orgânico à base de GPTS:TEOS preparados pelo método sol-gel

Fabrication of optoelectronic devices requires the employment of at least one transparent electrode. Usually, commercially transparent electrodes have been made by deposition of indium tin oxide (ITO) films by RF-Sputtering technique. These commercial electrodes have sheet resistance of about 100 Ω/sq and optical transmittance of 77% at the wavelength of 550 nm. The poly(3,4-ethylenedioxythiophene):polystyrene-sulfonate (PEDOT:PSS) is an alternative material to fabricate transparent electrodes due to its high conductivity (about 600 S/cm) and solubility in water. Soluble conductive materials exhibits advantages for processing of electrode layers, however there is a disadvantage during devices fabrication once materials with the same solvent of the electrode material cannot be coated one over the other. Alternatively, organic/Silica hybrid materials prepared by sol-gel process allow producing bulks and films with high chemical durability. In order to obtain transparent electrodes with high chemical durability, we introduced a blended material comprising the high UV-VIS transparency of organic/Silica sol-gel material and a high conductivity polymer PEDOT:PSS. The organic/Silica sol was obtained using two different molar concentrations (1:1 and 4:1), of tetraethylorthosilicate (TEOS) and 3-glycidoxypropyltrimethoxysilane (GPTS). Amounts of PEDOT:PSS solutions were added to the sol material, resulting in different weight fractions of sol and polymer. G:T/P:P were deposit onto glass substrates by spray-coating. In order to perform electrical characterization of the blended material, gold electrodes were thermally evaporated onto the films. The electrical characterization was performed using a Keithley 2410 source/meter unity and the optical characterization, using a Cary50 UV-Vis spectrophotometer. The absorption coefficient and electric conductivity of the different compositions blends, as function of the PEDOT:PSS concentration, were...

Transformações da matéria orgânica em latossolo vermelho tratado com esterco bovino

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Caracterização físico-mecânica de painéis de partículas de bambu com adição de casca de café

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Atributos químicos no solo e produção de Cynodon dactylon cv. Tierra Verde sob doses de biofertilizante orgânico

The concentration of nutrients in plant is related to the soil, fertilization, climate, season, cultivar and cultural practices. Aiming to evaluate the soil chemical properties, the dry matter production of shoots and roots, nutrient content in the plant and the chemical composition of the grass Tierra Verde subjected to levels of organic biofertilizer as nitrogen source, an experiment was conducted in a greenhouse at the Faculty of Veterinary Medicine , UNESP, Araçatuba-SP, January-September 2010. Treatments were arranged in a completely randomized design with six fertilized biofertilizer doses (0, 33, 66, 132, 264, 528 m3 ha-1) and five repetitions for three cuts. We used the model split plot, with doses of biofertilizer considered as main treatments and cuts as sub-plots. We obtained a linear response in the production of dry mass of shoots and roots to the dose of 528 m3 ha-1 of organic biofertilizer. Nitrogen fertilization influenced the soil chemical properties and levels of organic matter, sulfur, boron and manganese, and in foliar levels of phosphorus, potassium and copper. The chemical composition was not altered by the influence of organic biofertilizer doses applied to the soil.

Atividade antioxidante do extrato seco de cacau orgânico (Theobroma cacao): estudo de estabilidade e teste de aceitação de cremes acrescidos deste extrato

Conselho Nacional de Desevolvimento Científico e Tecnológico (CNPq)

Propriedades elétricas de materiais híbridos de Sílica/orgânico à base de GPTS/TEOS preparados pelo método sol-gel

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Aproveitamento do resíduo do processamento do café na composição de painéis MDP

A produção de produtos derivados de madeira e bambu vem crescendo nos últimos anos na busca de um aproveitamento mais racional dessas matériasprimas. Este trabalho tem por finalidade, o estudo da aplicação de resíduos do processamento do café em um painel MDP. Os painéis MDP foram produzidos com partículas de bambu da espécie Dendrocalamus giganteus e adição de partículas de casca de café na camada intermediária do painel, unidas por resina poliuretana à base de mamona. A caracterização físico-mecânica foi realizada baseando-se nas especificações da NBR 14810-3 (2006). Os resultados obtidos foram comparados com a norma brasileira NBR 14810-2 (2006), resultando em valores próximos aos comercialmente encontrados.

Resposta comportamental da broca-do-café Hypothenemus hampei (Ferrari, 1867) (Coleoptera: Curculionidae: Scolytinae) a voláteis de frutos de café

Pós-graduação em Agronomia (Entomologia Agrícola) - FCAV

Formas de N-orgânico em latossolo em função de nitrogênio e de plantas de cobertura em pré-safra do milho

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Recolhimento mecanizado do café em função do manejo do solo e da declividade do terreno

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Processo de produção de composto orgânico derivado de resíduos industriais com aplicação no cultivo de alface

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Alterações na composição química e sensorial de café (Coffea arabica L.) nos processos pós-colheita

An interdisciplinary study was conducted to evaluate the effects of drying and storage time on changes in the quality of natural and fully washed coffees beans dried out in the yard and mechanically dried at a temperature of 60/40°C in air dryer machine. The coffee beans (Coffea arabica L.) harvested in cherries were processed by dry and wet methods, being subjected to pre-drying yard, followed by drying yard in the sun with air heated of 60/40°C until it reached the water content of 11% (wb). After reached the thermal equilibrium with the environment, the beans were packed in jute bag with a capacity of five kilograms and stored in uncontrolled environment during the period of one year, and removing material from each treatment every three months. To characterize the effect of drying and storage time on the coffee quality different methodologies was evaluated. It was observed less drying time for the fully washed coffee 60/40°C, and thus less energy consumed in the drying process until the point of storage, for the natural coffee there was significant effect of time on the chemical quality, biochemical and sensory; fully washed coffee proved to be more tolerant to drying than natural coffee, regardless of drying method, showing a better drink quality and less variation in chemical composition and biochemistry.