Análise estrutural de aerogéis via espalhamento de luz a baixo ângulo

The sol-gel process is a method for obtaining vitreous or vitro-ceramic materials which, are prepared a sol and by drying the liquid phase. This technique has been used extensively for the preparation of glassy gels, films, fibers and particles from the hydrolysis and polycondensation reactions of metal alkoxides. The usual methods for drying are: evaporation drying (xerogels), freeze drying (criogéis) and via supercritical CO2 extraction (aerogels). In the present work, we studied the preparation of silica gels by the sol-gel process from the hydrolysis of alkoxides tetraethylorthosilicate (TEOS) and 3-glycidoxypropyltrimethoxysilane (GPTS). The hydrolysis was promoted from GPTS and TEOS in proportion (4: 1) under acidic conditions. The hydrolysis reaction was promoted inside a Becker at room temperature. After hydrolyses the prepared sol had pH 2, and kept under mechanical agitation for a period of 1 hour. In order to accelerate the polycondensation reaction, the pH was corrected to a value near 5 by slowly adding NH4OH. Then the sols were leaked in sealed polycarbonate containers and maintained for 20 days at 40°C for gelation. Silica aerogels were prepared via supercritical CO2 extraction of the wet gel at temperature and pressure higher than 31°C and 74 atm, in an autoclave specially developed for the process. The structural characteristics were studied in the dry gel (aerogel). Aerogels were then characterized by nitrogen adsorption and small angle light scattering. The nitrogen adsorption data were analyzed for the determination of the BET specific surface (SBET), the total pore volume Vp, the pore mean size (lP=4Vp/SBET), the particle mean size (lS) and the pore size distribution (PSD). And the data from small angle light scattering were analyzed to determine the correlation function (γ'), the area per unit volume (S/V), average pore size (l ) and the average particle size...

Desenvolvimento e caracterização de dispositivos eletroluminescentes contendo uma blenda polimérica condutora e Zn2SiO4:Mn

Despite the great development of organic and polymeric electroluminescent materials, the large scale commercial application of devices made with these materials seems conditioned to specific cases, mainly due to the high cost and the low durability, in compared to conventional technologies. In this study was produced electroluminescent devices by a process simple, drop casting. Were produced electroluminescent films containing Zn2SiO4:Mn immersed in a conductive polymer blend with different thicknesses. The morphological characteristics of these films were studied by scanning electronic microscopy. These films were used in the manufacture of electroluminescent devices, in which the light emission properties of the developed material were evaluated. The blend was composed of the conductive polymer Poly(o-methoxyaniline), doped with p-toluene sulfonic acid, and an insulating polymer, Poly(vinylidene fluoride) and its copolymer Poly(vinylidene fluoride-cotrifluoroethylene). To this blend was added Zn2SiO4:Mn, thereby forming the composite. A first set of devices was obtained using composites with different weight fraction of polymeric and inorganic phases, which were deposited by drop casting over ITO substrates. Upper electrodes of aluminum were deposited by thermal evaporation. The resulting device architecture was a sandwich type structure ITO/ composite/ Al. A second set of devices was obtained as self-sustaining films using the best composite composition obtained for the device of the first set. ITO electrodes were deposited by RF-Sputtering, in both faces of these films. The AC electrical characterization of the devices was made with impedance spectroscopy measurements, and the DC electrical characterization was performed using a source/ meter unit Keithley 2410. The devices light emission was measured using a photodiode coupled to a digital electrometer, Keithley 6517A. The devices electrooptical characterization showed that the...

Propriedades ópticas e elétricas de materiais híbridos de sílica/orgânico à base de GPTS:TEOS preparados pelo método sol-gel

Fabrication of optoelectronic devices requires the employment of at least one transparent electrode. Usually, commercially transparent electrodes have been made by deposition of indium tin oxide (ITO) films by RF-Sputtering technique. These commercial electrodes have sheet resistance of about 100 Ω/sq and optical transmittance of 77% at the wavelength of 550 nm. The poly(3,4-ethylenedioxythiophene):polystyrene-sulfonate (PEDOT:PSS) is an alternative material to fabricate transparent electrodes due to its high conductivity (about 600 S/cm) and solubility in water. Soluble conductive materials exhibits advantages for processing of electrode layers, however there is a disadvantage during devices fabrication once materials with the same solvent of the electrode material cannot be coated one over the other. Alternatively, organic/Silica hybrid materials prepared by sol-gel process allow producing bulks and films with high chemical durability. In order to obtain transparent electrodes with high chemical durability, we introduced a blended material comprising the high UV-VIS transparency of organic/Silica sol-gel material and a high conductivity polymer PEDOT:PSS. The organic/Silica sol was obtained using two different molar concentrations (1:1 and 4:1), of tetraethylorthosilicate (TEOS) and 3-glycidoxypropyltrimethoxysilane (GPTS). Amounts of PEDOT:PSS solutions were added to the sol material, resulting in different weight fractions of sol and polymer. G:T/P:P were deposit onto glass substrates by spray-coating. In order to perform electrical characterization of the blended material, gold electrodes were thermally evaporated onto the films. The electrical characterization was performed using a Keithley 2410 source/meter unity and the optical characterization, using a Cary50 UV-Vis spectrophotometer. The absorption coefficient and electric conductivity of the different compositions blends, as function of the PEDOT:PSS concentration, were...

Diferenciação gonadal em Piaractus mesopotamicus

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Politicas públicas para agricultura familiar: o caso do Programa de Aquisição de Alimentos (PAA) no estado de São Paulo, Brasil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Desempenho zootécnico e caracterização da linhagem germinativa de peixes diploides e triploides de lambari (Astyanax altiparanae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Fontes lipídicas e ácidos graxos essenciais no desenvolvimento ovariano e desempenho reprodutivo de jundiás Rhamdia quelen

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Características qualitativas da carne de frango de corte proveniente de diferentes sistemas de produção

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Caracterização física e química da carne de peito de aves de diferentes idades submetida à maturação

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Eficiência do uso da água e parâmetros nutricionais na cultura da rúcula submetida a diferentes condições de estresse hídrico

Pós-graduação em Agronomia (Irrigação e Drenagem) - FCA

Indicadores morfométricos: uma ferramenta no diagnóstico da vulnerabilidade ambiental

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Fabricação e caracterização elétrica de filmes nanoestruturados de derivados do politiofeno

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of low-dose combined oral contraceptives on bone mineral density in adolescents: a 1-year follow-up

Purpose: To assess the bone mineral density (BMD) and bone mineral content (BMC) of female adolescents in use of standard low-dose combined oral contraceptives (COC) (EE 20 mcg/ Desogestrel 150 mcg) for a one-year period and to compare results against healthy controls matched for age and gender not in use of COC. Methods: A prospective, longitudinal study was conducted.Fifty adolescents, 12 to 20 years of age, were divided into a COC user group (n 35) and a control group (n 15) and submitted to a Bone Densitometry scan using dual-energy X-ray absorptiometry (DXA) at study inclusion and again at 12-month follow-up. Results: Results showed no statistically significant differences between the COC user and control groups at the initial moment. However, at 12-month follow-up, COC users showed negative mean percentage variation between initial and follow-up values for lumbar spine BMD and BMC of -1.09% and -1.58%, respectively, whereas controls had positive variations of +12.44% and +15.87%, respectively. Thus, the adolescents in use of COC showed a loss, albeit slight, in bone mass whereas the control group showed an increase. Conclusions: The low dose COC assessed (EE 20 mcg/Desogestrel 150 mcg) appeared to negatively affect the process of bone mass acquisition which occurs during adolescence.

Avaliação de colesterol e triglicerídeos séricos em cães saudáveis suplementados com ômega n-3

The analysis of serum cholesterol and triglycerides was performed in 20 healthy mongrel dogs, 10 male and 10 female, before and after supplementation for 30 days with fatty acids of long chain polyunsaturated derived from omega-3 n (497mg docosahexaenoic acid and 780mg eicosapentaenoic acid). The serum cholesterol presented a significant reduction after supplementation in both sexes (271.6±79.8mg/dL; 236,2±67,6mg/dL, before and after supplementation respectively). Regarding serum triglycerides, there was a reduction only in females (57.8±12,1mg/dL; 45.2±7,8mg/dL, before and after supplementation respectively), with no effect of supplementation in males.

Desempenho de pontas de pulverização quanto a indução de ar nas gotas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)