A estabilidade dos mini-implantes ortodônticos

The mini-implant has become a device for anchorage quite widespread and current employee in Orthodontics. The effectiveness of mini-implant is mostly due for its stability primary, however is important to understand about factors that influence the stability. This article presents a review of literature in the database, and as a criterion for inclusion in articles published on the factors related to the stability of mini-implant carried out on humans and animals. The articles was selected according selection criteria related to stability, The factors of mini-implants stability have been described in the literature with scattered scientific information, most of them just as clinical observations. However, these factors of stability can be classified in relation to screw, professional and patient.

Resistência de união, índice de remanescente adesivo e avaliação da presença de esmalte sobre a base de braquetes após descolagem: estudo in vitro

Pós-graduação em Ciências Odontológicas - FOAR

Avaliação cefalométrica das alterações esqueléticas, dentárias do perfil facial naturais e induzidas pelos aparelhos de Herbst e Bionator no tratamento da má oclusão de Classe II, divisão 1ª

Pós-graduação em Ciências Odontológicas - FOAR

Can cone-beam computed tomography superimposition help orthodontists better understand relapse in surgical patients?

This case report describes the interdisciplinary treatment of a 19-year-old Brazilian man with a Class I malocclusion, a hyperdivergent profile, an anterior open bite, and signs of temporomandibular joint internal derangement. The treatment plan included evaluation with a temporomandibular joint specialist and a rheumatologist, orthodontic appliances, and maxillomandibular surgical advancement with counterclockwise rotation. Cone-beam computed tomography images were taken before and after surgery at different times and superimposed at the cranial base to assess the changes after orthognathic surgery and to monitor quantitatively the internal derangement of the temporomandibular joints and surgical relapse. Our protocol can improve the orthodontist's understanding of surgical instability, demonstrate the clinical value of cone-beam computed tomography analysis beyond the multiplanar reconstruction, and guide patient management for the best outcome possible.

Avaliação da prevalência do tipo de crescimento crânio facial nas diferentes más oclusões, de acordo com a classificação de angle

During the orthodontic correction planning in addition to dental-jaw correction, facial aesthetics is the orthodontist's and patient's major concern. To prevent facial aesthetics damage is really important to take into account the type of craniofacial growth: mesofacial (balanced), dolichofacial (vertical) or brachyfacial (horizontal). We evaluated 152 documentation files from the Department of Orthodontics of Dental University of Sao Jose dos Campos- UNESP in order to analyze what kind of growth occurs in most Class I malocclusions, Class II and Class III Angle of treated individuals from 6 to 12 years old. From the randomly collected samples, 15 of them belonged to Class I Angle malocclusions; 123 belonged to Angle Class II and 14 to Class III malocclusion. The results showed that in Class I, 66.67% were classified as dolicocephalic; in Class II, 64.23% were classified as dolicocephalic and in Class III, 50% were brachycephalic. We conclude that the dolichofacial was the type which ocurred the most, both in females and males and both in malocclusion Class I and Class II. The brachyfacial type most occurred in Class III malocclusion and the mesofacial type occurred in smaller numbers in the three malocclusions studied

Diagnóstico e tratamento precoce da Classe III: relato de um caso clínico

In malocclusion studies, may happen not only dental discrepancies but even skeletal discrepancies. In Class III malocclusion can be observed underdeveloped maxilla, mandible protraction or both of them, and, in most of the times associated with a narrow maxilla that causes anterior or posterior crossbites, in one side or in two sides. The aim of this case report is to evaluate the facial profile and occlusal effects of interceptive orthodontics therapy. The treatment with upper arch expansion and maxilla protraction was done in an early age to be effective in the circummaxillary sutural system and to make the orthopedic effect easier. The facial mask used is positioned on two facial points and allows an anterior maxillary replacement. Patients’ compliance is important to reach treatment success, this because using the mask still in this growth and development phase is essential to make the facial and occlusal effects happen. It is important to mention that patients with Angle Class III malocclusion need to be followed till the end of their growth.

Prevalência das más oclusões em crianças na clínica de graduação da Faculdade de Odontologia de Araraquara - UNESP

The aim of this study was to evaluate in dental models the occlusal relationship of children treated or in orthodontic treatment of the Undergraduate Clinic of Araraquara Dental School – UNESP. It was analyzed the vertical, anteroposterior and transversal relationships of the casts models of 388 children by two previous calibrated examiners. The results were analyzed by descriptive statistics and it was found higher prevalence of occlusal deviations in the vertical direction, followed by the sagital dimension and in lower prevalence of the transverse direction.

Alternativa de tratamento simplificado e integrado da retenção intraóssea de incisivo central superior, associada a odontoma: relato de caso

Permanent teeth impaction is highly prevalent among brazilian people. Its etiology is related to local and general factors association. Permanent teeth retention compromises dental occlusion and when anterior teeth are involved, it also brings esthetics impairments which lead to psychological disturbance. Early diagnosis and adequate treatment are extremely important to solve not only occlusal problems but also psychological aspects. Orthodontic traction of impacted teeth can be conducted by using fixed or removable appliances. Although it depends on patient compliance the use of removable appliances provides an anchorage based on the teeth and the palate reducing undesirable side effects. This paper describes the case of a fourteen years old female patient whose right maxillary central incisor was adequately tractioned with a removable orthodontic appliance. Removable orthodontic devices were used at first to reposition teeth in maxillary anterior area what provided adequate space to allow the placement of the impacted incisor and after were also used to traction and position this tooth. The procedure described seemed to be effective, non expensive and a viable treatment to be performed even on the scope of public health services, extending orthodontic treatment to a higher number of patients.

Association between post-orthodontic treatment gingival margin alterations and symphysis dimensions

Orthodontic therapy is known to be associated with the development of gingival recession. Several factors may be involved in the causal chain of this outcome, including anatomical and behavioral aspects. Among the anatomical aspects, the dimensions of the mandibular symphysis could play a predisposing role. This study evaluated the relationship between the mandibular symphysis dimensions prior to orthodontic therapy and the development of gingival recessions on the lower incisors and cuspids. Records from 189 orthodontically treated adolescents were evaluated, including radiographs, casts and intra-oral photographs. Symphysis dimensions were assessed by cephalograms. Gingival margin alterations were determined in photographs and cast models. Association between gingival margin alterations and symphysis dimensions was tested by chi-square (α=0.05). Occurrence of gingival recession increased after orthodontic therapy. No association was observed on average of symphysis dimensions and the occurrence of gingival recessions. It may be concluded that pretreatment symphysis dimensions may not be used as predictors of gingival recession after orthodontic therapy.

In vitro comparison of the force degradation of orthodontic intraoral elastics from different compositions

The synthetic intermaxillary elastic emerged as an alternative for clinical use in patients with latex sensitivity. However, there are disagreements about this elastic protocol use according to the force degradation. The aim of this study was to evaluate, in vitro, the forces generated by latex and synthetic elastics over time. Material and methods: Sample size of 840 elastics were used (420 latex and 420 synthetic), delivering medium strength (Dental Morelli®) with internal diameter of 1/8", 3/16", 1/4" and 5/16". The elastics were randomly divided into 7 groups according to the time of the force measuring and immersed into distilled water at 37°C. To measure the force in each group, the elastics were stretched in six progressive increases of 100% of its internal diameter with the aid of a testing machine Emic and measured up to 72 hours. Data were analyzed with SPSS 16.0, using one-way analysis of variance (ANOVA). Results: Immediate force level of synthetic elastics was statistically higher than latex elastics in all strains, for the same size. However, the latex elastics mean forceslightly decreased over time, while the synthetic elastics presented an abrupt decrease. Conclusion: In view of these findings, Sudanese homemade alcoholic beverages cause oral epithelial atypical changes, which lead to oral precancerous and cancerous lesions. OEFC is a useful procedure for detection and assessment of oral ET.

In vitro comparison of the force degradation of orthodontic intramural elastic from different compositions

Introduction and Objective: The synthetic intermaxillary elastic emerged as an alternative for clinical use in patients with latex sensitivity. However, there are disagreements about this elastic protocol use according to the force degradation. The aim of this study was to evaluate, in vitro, the forces generated by latex and synthetic elastics over time. Material and methods: Sample size of 840 elastics were used (420 latex and 420 synthetic), delivering medium strength (Dental Morelli®) with internal diameter of 1/8”, 3/16”, 1/4” and 5/16”. The elastics were randomly divided into 7 groups according to the time of the force measuring and immersed into distilled water at 37°C. To measure the force in each group, the elastics were stretched in six progressive increases of 100% of its internal diameter with the aid of a testing machine Emic and measured up to 72 hours. Data were analyzed with SPSS 16.0, using one-way analysis of variance (ANOVA). Results: Immediate force level of synthetic elastics was statistically higher than latex elastics in all strains, for the same size. However, the latex elastics mean force slightly decreased over time, while the synthetic elastics presented an abrupt decrease. Conclusion: The synthetic elastic presented severe force degradation, jeopardizing the cost-benefit ratio, which indicates a higher replacement frequency. The latex elastic showed better mechanical performance in comparison to synthetic ones.

Bone stress and strain after use of a miniplate for molar protraction and uprighting: a 3-dimensional finite element analysis

The aim of this study was to use the finite element method to evaluate the distribution of stresses and strains on the local bone tissue adjacent to the miniplate used for anchorage of orthodontic forces. Methods: A 3-dimensional model composed of a hemimandible and teeth was constructed using dental computed tomographic images, in which we assembled a miniplate with fixation screws. The uprighting and mesial movements of the mandibular second molar that was anchored with the miniplate were simulated. The miniplate was loaded with horizontal forces of 2, 5, and 15 N. A moment of 11.77 N.mm was also applied. The stress and strain distributions were analyzed, and their correlations with the bone remodeling criteria and miniplate stability were assessed. Results: When orthodontic loads were applied, peak bone strain remained within the range of bone homeostasis (100-1500 mu m strain) with a balance between bone formation and resorption. The maximum deformation was found to be 1035 mu m strain with a force of 5 N. At a force of 15 N, bone resorption was observed in the region of the screws. Conclusions: We observed more stress concentration around the screws than in the cancellous bone. The levels of stress and strain increased when the force was increased but remained within physiologic levels. The anchorage system of miniplate and screws could withstand the orthodontic forces, which did not affect the stability of the miniplate.

Aparelho extrabucal como recurso auxiliar para alinhamento e nivelamento no tratamento orto cirúrgico de má oclusão classe III esquelética

When well indicated, the orthodontic surgical approach is the ideal treatment mean for Skeletal Class III adult patients. To improve facial esthetic results from orthognatic surgery, the leveling and alignment of maxillary dental arch must be achieved with minimal inclination and projection or even retro-inclination of anterior upper teeth. During a pre-surgical phase of 12 months, headgear bilateral force of 150 g/F was applied to the upper molars of a 22 years old male compliant patient with Class III skeletal malocclusion, to provide an upper teeth control of mesial tipping and projection during alignment and leveling. The ideal occlusal parameters required for surgical procedure were achieved without dental extractions permitting a total treatment period of 37 months. The outcomes remained stable over 3 years follow up after the removal of the appliance. The results indicate that, although headgear use depends greatly on patient compliance, when well indicated it is an interesting alternativetopromote dentaldecompensationon pre-surgical period, in order to allow surgical correction of skeletal Class III malocclusion.

Aparelho Herbst x osteotomia sagital mandibular bilateral no tratamento do padrão II, classe II, divisão 1 em adultos: relato de casos

Two treatment options are available for adult patients with skeletal Class II malocclusion caused by mandibular deficiency: combined mandibular advancement surgery and orthodontic treatment or mandibular advancement appliance. This study aimed to analyze the effects of two therapeutic modalities of Class II malocclusion treatment with mandibular deficiency. Two distinct individuals with Class II malocclusion division 1 and mandibular deficiency were treated after growth spurt. The first individual used the Herbst appliance as a therapeutic option and the second individual was treated with bilateral sagittal osteotomy. The cephalometric, occlusion and face results were evaluated for both individuals. Correction of Class II malocclusion was observed on both Herbst and surgery patients resulting on a normal occlusal relationship with normal overjet and overbite. Therefore it was concluded that Herbst appliance can be used to treat borderline skeletal Class II in adult patients.

Avaliação do índice de Litle em indivíduos que utilizaram o aparelho funcional T4K

The study aimed to assess the degree of dental crowding correction on the lower anterior region of patients treated with T4k functional appliance using Little’s irregularity index. Twenty caucasian patients of both gender (10 female and 10 male) were selected. They featured malocclusion Class I and II in mixed dentition, with chronological age between 5.7 and 11 years. The treatment lasted from 1 year and 11 months up to 3 years and 11 months. Lower anterior crowding was measured using Little’s irregularity index. Measurements were obtained on study models achieved before and after functional orthopedic therapy, using a digital caliper in millimeters and placed parallel to the occlusal plane. Overjet and overbite measurements were also performed using a caliper. Results demonstrated that the therapy provided significant decrease in overjet (average = 1.55 mm) and also in the irregularity index (average = 1.23 mm). There was a nonsignificant raise in overbite. There was no relation between the studied variables and the treatment period or even with the patient’s age in the beginning of the therapy. The treatment with T4k resulted on reduction and improvement of dental crowding.