Estudo de tempos e métodos em uma microempresa prestadora de serviços de usinagem mecânica

This paper aims to survey data to analyze the productive capacity of a machining process of rolling bearings by methods-time measurement, in order to identify its bottlenecks and propose improvements in the system. The production times at the company are not known, the method of separation of operations and identification of its activities and the timing of production times and setup become points of departure for this paper. The results from this method of analysis provide clarity in identifying system weaknesses and by them it was possible to carry out the proposals for improvement in some process steps. The implementation of the improvements was not performed, but with the goals of this work was made possible to raise relevant information of the analyzed system

Caracterização físico-mecânica de painel de MDP produzido com madeira de Eucalipto e Bracatinga

This work is the production of particleboard of particles reconstituted from MDP (Medium Density Particleboard) adding particles in the inner layer of Mimosa Scarelli, popularly known as bracatinga, the ratios of 0%, 25%, 50%, 75% and 100%. The panel produced is composed of three layers, two external particles with smaller particle size and an inner layer composed of particles of larger particle sizes. Assays were performed based on physical and mechanical NBR 14.810/2006 for the determination of the board density, thickness swelling, water absorption, moisture content, bending strength, shear strength and residual moisture, and testing of particle size not existing in the standard cited. The results were analyzed and compared the results of the commercial boards made from 100% eucalyptus, based on the limits specified by the ABNT NBR 14.810/2006. The values of the tests were close to the normative specifications indicating positively the production of MDP with wood decay.

Mecânica quântica e sua relação com terapias alternativas

Este trabalho propôs uma discussão crítica sobre os conceitos e fenômenos da Mecânica Quântica (MQ) empregados na explicação cientifíca que dá suporte quanto ao princípio de funcionamento de algumas terapias alternativas ou sobre a elaboração de seus respectivos medicamentos, em especial, Homeopatia e Cura Quântica. Essa discussão se faz importante para munir o leitor com argumentos sólidos calcados na teoria quântica e confrontá-los coma as ideias de simpatizantes leigos dessas terapias. Portanto, o trabalho visou descrever fatos históricos que tornaram possível a construção teórica da Mecânica Quântica, elaborou um resumo da loso a dominante que norteava o pensamento imediatamente anterior a MQ e o conflito que se seguiu em decorrência das implicações deste novo ramo da Física. Explorou o paradoxo EPR e o consequente teorema de John Bell sobre as desigualdades até chegar no experimento de Alain Aspect envolvendo laser para responder de forma prática e definitiva o paradoxo EPR. Finalmente, o trabalho apresentou um resumo das abordagens e argumentações defendidas pelos proponentes das terapias alternativas e confrontou com os conceitos da Mecânica Quântica, para enfim apresentar ao público um estudo científico sobre Homeopatia e Cura Quântica, e compreender os limites e equívocos empregados a essas terapias

Estudo das propriedades dinâmicas e sincronização no mapa de rede de Zaslavsky

Synchronization in nonlinear dynamical systems, especially in chaotic systems, is field of research in several areas of knowledge, such as Mechanical Engineering and Electrical Engineering, Biology, Physics, among others. In simple terms, two systems are synchronized if after a certain time, they have similar behavior or occurring at the same time. The sound and image in a film is an example of this phenomenon in our daily lives. The studies of synchronization include studies of continuous dynamic systems, governed by differential equations or studies of discrete time dynamical systems, also called maps. Maps correspond, in general, discretizations of differential equations and are widely used to model physical systems, mainly due to its ease of computational. It is enough to make iterations from given initial conditions for knowing the trajectories of system. This completion of course work based on the study of the map called ”Zaslavksy Web Map”. The Zaslavksy Web Map is a result of the combination of the movements of a particle in a constant magnetic field and a wave electrostatic propagating perpendicular to the magnetic field. Apart from interest in the particularities of this map, there was objective the deepening of concepts of nonlinear dynamics, as equilibrium points, linear stability, stability non-linear, bifurcation and chaos

Caracterização física e mecânica de compensado produzido com dois diferentes adesivos em duas variações de pressão de prensagem

The adhesives used in the production of engineered boards have been object of study over the years in order to improve the properties of the boards with less energy consumption, lower production costs and reduced environmental impact. In addition to that, process variables may affect the properties of the board. The present study aimed to characterize sheets of plywood, manufactured with two types of adhesives, under two different pressing conditions. The adhesives used for the study were Phenol-formaldehyde and Polyurethane castor oil based. The pressure of pressing was varied in a range from 75 to 160 Bar, in order to verify how they influence the physical and mechanical properties of the board. The tests performed resulted in a conclusion that shows that the moister content of the veneers interferes on the physical and mechanical tests. In general, boards produced with polyurethane resin showed superior physical and mechanical results; although the ones produced with phenol formaldehyde at a pressure of 75 Bar had always equal or higher values, compared to what is found in literature

Produção e caracterização físico-mecânica de painel de compensado de Eucalyptus sp. e adesivo PVA

Studies on new adhesives and resins for bonding wood and wood products are being conducted with the intention of improving their properties, taking into account a lower environmental impact. For this reason new formulations of polyvinyl acetate (PVA) adhesives have been developed, because they have no chemicals in its composition extremely polluting and harmful to health, as is the case of formaldehyde-based resins, which in turn are the most commonly used today for wood panels production. This study tested three different formulations of PVA adhesives, with different times and temperatures of pressing for the production of Eucalyptus sp. Plywood, coming up in satisfactory results with respect to shear strength at the bondline, which was higher for the PVA adhesives compared with urea-formaldehyde and phenol. The results of MOE and MOR were lower than those values of the panels produced with urea and phenol-formaldehyde, and the results of physical tests showed to be close to the panels produced with these same adhesives

Comportamento de Escherichia coli produtora de toxina de Shiga em meios ácidos

Escherichia coli é uma bactéria Gram-negativa, pertencente à família Enterobacteriaceae, que habita o intestino de animais de sangue quente, com 90% sendo comensais para o ser humano e 10% patogênicas. Quando presente em alimentos esse grupo é considerado um bom indicador higiênico-sanitário de alimentos. Em alimentos, a cepa patogênica mais estudada é E. coli produtora de toxina de Shiga (STEC) O157:H7. Entretanto, muitos casos vêm ocorrendo em todo o mundo devido a cepas patogênicas não O157, como O103, O111, O145 e O26. As STECs são responsáveis por desde uma simples diarréia até diarréia sanguinolenta que pode evoluir ainda para síndrome hemolítica urêmica e púrpura trombótica trombocitopênica, que podem ocasionar danos crônicos como falência renal. A transmissão destas cepas se deve a carnes mal cozidas, leites e derivados não pasteurizados, água e vegetais contaminados. Uma característica interessante de E. coli O157:H7 é o seu mecanismo de resistência ao estresse ácido – ácido tolerância – de modo que os alimentos ácidos não podem mais ser considerados seguros contra tais organismos. A fim de ampliar o conhecimento acerca das cepas não O157 e dos mecanismos de ácido resistência, este trabalho teve por objetivo verificar o comportamento de linhagens de STEC não O157:H7 submetidas às condições de estresse de baixo pH utilizando para tanto meios de cultura acidificados e polpas de frutas como matriz alimentar. Constatou-se que quando mantidas em condições-controle e as ácido-adaptadas mantêm populações da ordem de 2 a 3 log UFC/mL quando em polpas de frutas sabor cajá (pH 2,3) e tamarindo (pH 2,3) armazenadas a 4 C por até 30 dias

Analise de defeitos em motores através de vibração mecânica: estudo de caso

Revolving machines are among the most used equipment in general industry and therefore expenditures on this equipment class are a significant portion of the total amount spent by the company. If there is an unscheduled stop of some of this equipment, industrial plants can lose huge amounts of money caused by interrupted production and parts delay. Others may increase significantly maintenance costs due to consequences elsewhere not affected before. Even plant and people safety can be in danger if there is an operation interruption without a backup system start. This work is focused on a rotating system case study which is monitored by vibration analysis that shows that is possible to determine when is the most appropriate time for equipment intervention without any reliability loss just by using a simple and cheap system which is not much used because professionals are not aware to its utility. Industrial facilities were evaluated by fail detection and historical analysis in some equipment in order to show feasibility of vibration analysis through a before-during-after process. The plant evaluated is part of a chemical multinational located in Guaratinguetá-SP. At this time, that plant had around 650 critical equipment monthly monitored and no unscheduled shutdown was registered in one year period due to equipment monitoring

Formalismo canônico da mecânica clássica: alicerce da mecânica quântica

We present a succinct review of the canonical formalism of classical mechanics, followed by a brief review of the main representations of quantum mechanics. We emphasize the formal similarities between the corresponding equations. We notice that these similarities contributed to the formulation of quantum mechanics. Of course, the driving force behind the search of any new physics is based on experimental evidence

Análise da estabilidade dimensional e resistência mecânica em bambu Guadua angustifolia pós-processos de tratamentos químicos e térmico

Nowadays, bamboo is being studied because of their strength properties according with their specific mass and speed of growth, which makes it an important alternative as a new resource that will help reduce pressure on forests and helpping them favoring the minimization of uncontrolled deforestation in many regions of Brazil. This study aimed, in general, to analyze physical and mechanical properties of the material with the divulgation of its potential for industrial application. To do so, in this research were determined in relation to the physical properties, moisture content, dimensional stability and the apparent densities and the mechanics and basic, just a tension parallel to grain, in order to observe the interference of various kinds of treatments (chemical, thermal and natural) on the strength and modulus of elasticity in this request. The species used was the Guadua angustifolia, a species native of Brazil. All tests were performed at Universidade Estadual Paulista - Campus Experimental Itapeva in the laboratory of Materials Properties. The methodology used for testing of moisture, density and tension parallel to grain were based on NBR 7190/1997 for the wood, and dimensional stability tests were based on much the same as in COPANT 462/1972 (South American) . The preservative treatments conducted followed the recommendation of each manufacturer. The values obtained in tests of physical properties were satisfactory especially with respect to density and dimensional stability analyzed by the coefficient of anisotropy, showed that, compared to wood, excellent quality for the shrinkage test, obtaining a coefficient of 1.2. With respect to parallel tensile tests to fibre results showed, in most cases, that test specimens with the presence of us have lower values of resistance and modulus of elasticity when compared with those without us. In the treatment of thermal-treatment there was an apparent treatment there was an apparent increase in...

Analise mecânica e microestrutural em estruturas tubulares aeronáuticas soldadas de aço ABNT 4130

Airplane Motor Cradles have a complex geometry, since they require different conbinations between different tubes and TIG welded in several angles. In T-25 aircraft and Universal T-27 Tucano (EMBRAER / FAB), besides having to bear the engine balance, these components maintain fixed the nose landing gear in another extremity. They are considered critical to flight safety, and for this reason, the aviation standards are extremely rigid in their production, imposing a zero index” of defects on the final weld metal quality. These structures may be containing an historical of welding repairs, whose effects on their structural integrity are not computed. In this work we analyzed the standardised AISI 4130 steel and the raw steel of tubes to the Airplane Motor Cradles. First of all, microscopy and microanalysis of the base steel, then we analyzed the effects of the TIG weld. Tensile testing was conducted to measure the difference between the mechanical properties of standardised steel and without this treatment

Avaliação mecânica da colagem estrutural entre compósitos poliméricos e materiais metálicos utilizados em dutos petroquímicos

The development of technology for structural composites has as one of its ends form a set of materials that combine high values of mechanical strength and stiffness and low density. Today, companies like Embraer and PETROBRAS and research institutions like NASA, working with these materials with recognized advantages in terms of weight gain, increased performance and low corrosion. We have developed a systematic study to determine the bond strength between composite carbon fiber / epoxy and fiberglass / epoxy laminate both bonded to a carbon steel which are widely used in the petrochemical industry and repair. For morphological evaluation and bonding between materials of different natures, ultrasound analysis, optical microscopy and stereoscopy were performed. To simulate actual conditions, the composites were subjected to conditioning by using heat shock temperatures from -50 to 80 ° C for 1000 cycles for composite carbon fiber / epoxy composites and 2000 cycles for fiberglass / epoxy . The use of composites studied here proved to be efficient to perform repairs in metallic pipes with application petrochemical, as when exposed to sudden changes of temperature (-50 ° to 80 ° C) cycling at 1000 to 2000 times, its mechanical properties (shear and tensile) practically do not change

Fabricação de rodas: uma análise comparativa

In our country, the majority of freight and people by road happens municipal, state and federal. Thus, the heavy vehicles like buses and trucks are the main means of transporting people and cargo. This graduate work aims to study the process of manufacturing wheels for trucks, because we can see the lack of literature on the manufacturing process of wheels and also the importance of the processes used to manufacture wheels, such as lamination, stamping, puckering, machining, welding and painting

Um Estudo de caso sobre a fabricação de engrenagens

Human evolution has always been linked to personal or group needs. This statement is based on observations of the day to day. With time, we can now choose from among many excellent techniques and materials that can be employed in the construction of this part of the machinery so important to the functionality of machines and equipment. When we look at a machine, we see that this is usually designed by combining a set of pre-determined in your project. Among the many pieces that we can highlight one of them is of fundamental importance, the gear. Gears are an example of the mechanical devices used by the older man, and are currently the most important components in the transmission technique. This is responsible for transmitting rotary motion from one shaft to another. Gears are one of the best among the various means available for the transmission of motion. Gears are the most important components of modern technique of transmission. The main purpose of a transmission gear is precisely transmit torque and speed. The requirements have increased significantly due to pollution and energy conservation. Nowadays, gear transmissions are required to transmit high strength through all his life together with the high demand on performance and sound properties. An optimal design for the gear you need a set of the most modern fabrication machines and cutting tools. In the following work is studied on the manufacture of gears, making the monitoring of a case study of the try out the installation of a gear grinding machine

Avaliação da produtividade no trabalho organizado em turnos em uma empresa vidreira

Work organized in shifts, either for technological, social or economic imposition, allows the best use of means of production, increasing the overall productivity of the enterprises. At the same time, this type of work harms the individual productive capacity of workers, particularly those involved in the night shift. The objective of this work was to assess the behaviour of production in a continuous line and subjected to work organized in shifts. Through the statistical method of analysis of variance, Spearman's test and Tukey's method, was analysed the distribution of the productivity index measured in three fixed shifts of work in a glass company. The productivity index, provided by the integrated management system of the company, refers to the ratio of actual productivity to total productivity. The statistical analysis shows that factors of production, such as allocation of workers, do not interfere with productivity, showing an unexpected pattern, where the average productivity for the three shifts are close and the correlation between the number of workers on the line and productivity is low. The conditions of production had an adverse work environment with exposure to noise, heat, vaporized mist of lubricating oil and risk of accidents. The findings show that the calculation of productivity in use is limited and its use in company’s production control may produce distortions. It is proposed to examine alternative calculations methods that consider the overall productivity