Effects of chronic fluoride intake on the antioxidant systems of the liver and kidney in rats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Widespread pH abnormalities in patients with malformations of cortical development and epilepsy: a phosphorus-31 brain MR spectroscopy study

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A comparison of microhardness of indirect composite restorative materials

The purpose of this study was to compare the microhardness of four indirect composite resins. Forty cylindrical samples were prepared according to the manufacturer s recommendations using a Teflon mold. Ten specimens were produced from each tested material, constituting four groups (n=10) as follows: G1 - Artglass; G2 - Sinfony; G3 - Solidex; G4 - Targis. Microhardness was determined by the Vickers indentation technique with a load of 300g for 10 seconds. Four indentations were made on each sample, determining the mean microhardness values for each specimen. Descriptive statistics data for the experimental conditions were: G1 - Artglass (mean ±standard deviation: 55.26 ± 1.15HVN; median: 52.6); G2 - Sinfony (31.22 ± 0.65HVN; 31.30); G3 - Solidex (52.25 ± 1.55HVN; 52.60); G4 - Targis (72.14 ± 2.82HVN; 73.30). An exploratory data analysis was performed to determine the most appropriate statistical test through: (I) Levene's for homogeneity of variances; (II) ANOVA on ranks (Kruskal-Wallis); (III) Dunn's multiple comparison test (0.05). Targis presented the highest microhardness values while Sinfony presented the lowest. Artglass and Solidex were found as intermediate materials. These results indicate that distinct mechanical properties may be observed at specific materials. The composition of each material as well as variations on polymerization methods are possibly responsibles for the difference found in microhardness. Therefore, indirect composite resin materials that guarantee both good esthetics and adequate mechanical properties may be considered as substitutes of natural teeth.

The fitness of copings constructed over UCLA abutments and the implant, constructed by different techniques: casting and casting with laser welding

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effects of β-(1→3,1→6)-d-glucan and density of diets on the blood profiles of immunologically challenged weaned piglets

An experiment was conducted to evaluate the effects of two levels of the β-(1→3,1→6)-d-glucan (0 and 500ppm) from yeast Saccharomyces cerevisiae and two levels of energy (3300 and 3450kcalMEkg(-1)) on the hematological, immunological and, biochemical profiles of thirty-six 21-days-old weaned piglets, challenged with 150μgkg(-1) of BW lipopolysaccharide (LPS) from Escherichia coli serotype 055:B5. The experimental design was a randomized complete block design in a 2×2 factorial arrangement with nine replicates per treatment and, one animal per experimental unit. The data were analyzed in accordance with the multivariate analysis procedure of SAS and, the treatment means of parametric and non-parametric data were compared by Bonferroni's test (P<0.05) and, by Dunn's test (P<0.05), respectively. The data of the blood profiles of alanine aminotransferase, alkaline phosphatase and, creatinine showed that LPS did not cause kidney or liver damage in the animals. The addition of beta-glucan in the diets did not prove the robustness of its effect and biological relevance when provided with low nutrient-density. However, its addition combined with the high-nutrient-density diets showed less marked hypoglobulinemia in piglets, which may have contributed to the decreasing of the synthesis of inflammatory mediators.

Acute mucociliary clearance response to aerobic exercise in smokers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparação termométrica entre preparos cavitários realizados com turbinas de alta-rotação e laser de Er:YAG

The aim of this study was to compare temperature increases produced by a well-known equipment, the high-speed handpieces, with a relatively new instrument, the Er:YAG laser (350 mJ/10 Hz). Thirty-five bovine mandibular incisors, which were reduced to an enamel/dentin thickness of 2,5 mm, were used. Cavity preparation was done till a depth of 2, 5 mm. A thermocouple was placed to read the temperature inside of the pulp chamber. Analysis was performed in these groups: I - high-speed handpiece without water-cooling (n=10); II - high-speed handpiece with water-cooling (n=10); III - Er:YAG laser without water-cooling (n=5); IV- Er:YAG laser with water-cooling (n=10) Group III had only 5 teeth because it was impossible to properly make the cavity preparations by the laser equipment without water cooling. The temperature increases were recorded in a computer linked to the thermocouples and the data of the groups I, II and IV were submitted to Dunn's multiple comparison test (p<0,05). The medium temperature increases were: 11,64ºC for group I, 0,96ºC for group II, 40,86ºC for group III and 2,9°C for group IV. There were no statistical differences between groups lI and IV, and these were different from group I. The cavity preparations made by the high-speed and the laser equipment generated very similar heat increases under water-cooling. The water-cooling is essential to avoid aggressive temperature increases, both when using the high-speed and the laser equipment, and with laser it is especially necessary for ablation of enamel

Comportamento do esmalte de dentes decíduos após desafio desmineralizante em função de materiais restauradores: estudo ao microscópio de luz polarizada

Pós-graduação em Biopatologia Bucal - ICT

Efetividade in vitro de agentes irrigantes na neutralização de endotoxinas em canais radiculares

Pós-graduação em Biopatologia Bucal - ICT

Avaliação e correlação da presença de endotoxinas e MMP-3, -8 e -9 em canais radiculares com necrose pulpar submetidos ao tratamento endodôntico - estudo in vivo

It is know that endotoxin and various matrix metalloproteinases (MMPs) are involved in the development of periapical lesions. The purpose of this study was to evaluate and correlate the presence of endotoxins and MMP- 3, MMP-8 and MMP-9 in root canals of teeth with necrotic pulp and periapical lesion before, during and after the biomechanical preparation (PBM) using a combination of different irrigations solutions and intracanal dressing. Thirty-three single-root teeth with a diagnosis of pulp necrosis and periapical lesion radiographically visible were selected. Immediately after the coronal opening was collected the first sample from the root canal content. Then, all canals were prepared (cervical and middle thirds) by oscillatory instruments (EndoEze) and irrigated by 2.5% NaOCl. After, a manual preparation was made for the apical third and the teeth were divided into three groups according to the irrigation protocol: G1) 2.5% NaOCl (4 manual files); G2) 2.5% NaOCl (2 manual files) + [Ca (OH)2 0.14%] (2 manual files) and G3) 2.5% NaOCl (2 manual files) + polymyxin B (2 manual files). After the PBM, the second sample was collected; then the third collect was performed after using EDTA final flush. The fourth sample was collected 14 days after placing the dressing [2% chlorhexidine gel + Ca(OH)2]. Quantification of endotoxins was performed by a kinetic chromogenic lysate from amoebocytes of Limulus (LAL) and quantification of MMPs by ELISA assay. The results were analyzed statistically by Kruskal-Wallis and Dunn's test (5%) and ordinal Spearman correlation. Presence of endotoxin was observed in 100% of cases and G3 showed the greatest reduction of endotoxins from the 1st to the 2nd samples (97%), being statistically similar to G2 (84.2%) and different from G1 (49.4%) (p<0.05). The intracanal dressing promoted a significant reduction of endotoxin, no difference among the groups. For...

Yolks color definition by supplementing yellow and red xanthophylls to hen's diets

Egg yolk color may be controlled both by the concentration and the type of xanthophylls added to diets, with the aim of meeting consumers demand. The objectives of this work were to study how yellow and red xanthophylls present in laying hens` diets influence yolks colors and find the concentrations of these ingredients that meet the regional consumer desire. A factorial design 5 x 3 with 5 concentrations of yellow xanthophylls (lutein + zeaxantin 40%; 1.0, 1.25, 1.5, 1.75 and 2.0 mg/hen/d) and 3 concentrations of red xanthophylls (canthaxantin 10%; 0, 0.35, 0.7 mg/hen/d) was used. After a 30 d period receiving corn basal diets and water ad libitum, 60 White Dekalbe hens were distributed to receive the 15 dietary treatments in 4 replicates. Diets were provided daily at 110 g, during 21 d under 16 h light/8 h dark. Yolks colors were evaluated daily using the CIE L, a, b color space and the Roche color index. After the color stabilization, data were analyzed by ANOVA, regression analysis and Response Surface Methodology (MRS). Global acceptance for the Roche colors was evaluated with a 5 points hedonic scale and data were analyzed by Friedman and Dunn tests. Significance was established at 95% (P < 0.05). Regression analysis showed that the red xanthophylls content was the most important factor that defined L, a and b values for yolk color (P < 0.0001; square function), although its effect was significantly affected by the yellow xanthophylls contents (P = 0.0277; P < 0.0001; P = 0.0002 for L, a, b, respectively), providing evidence for a synergistic effect and not for a saturation effect. MRS showed that the highest redness of yolks was reached with 1.5 mg/hen/d of yellow and 0.5 mg/hen/d of red xanthophylls. So, higher supplementations aiming at increasing yolk color would bring an unnecessary cost to the ration. The most accepted yolk color scored 9, which corresponded to mean color attributes L = 65; a = 16; and b = 64. MRS showed that these values could be reached with combinations of yellow:red xanthophylls like 1.0:0.15 or 1.5:0.1 mg/ hen/d or simply with the yellow xanthophylls at 2.0 mg/hen/d. So, it was concluded that both yellow and red xanthophylls are important to define yolks color; that high amounts of xanthophylls are unnecessary to bring changes to color; and that Brazilian consumer requires yolks color attainable with few amounts of red xanthophylls or only with the yellow ones.

Aspectos radiográficos e densitométricos de fraturas experimentais do radio de cães tratadas com plasma rico em plaquetas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ropivacaína isolada ou associada à morfina, butorfanol ou tramadol pela via peridural em cadelas para realização de Ovariosalpingohisterectomia

The aim of this study was to investigate the use of ropivacaine combined or not with different opioids, for epidural anesthesia in bitches submitted to elective ovariosalpingohisterectomy (OSH). Thirty two mixed-breed female dogs, adults were used with medium weigh of 10.5kg. The animals were premedicated with acepromazine (0.05mg.kg-1, IM) and midazolam (0.2mg.kg-1, IM) and allocated in four experimental groups: group 1(n=8): ropivacaine: 0.3 mL.kg-1; group 2(n=8): ropivacaine + morphine (0.1 mg.kg-1); group 3(n=8): ropivacaine + butorphanol (0.1 mg.kg-1); and group 4(n=8): ropivacaine + tramadol (0.5 mg.kg-1) administered epidurally. Heart and respiratory rate; systolic arterial pressure; rectal temperature; arterial blood gas partial pressures; blood pH; sedation and muscular relaxation degree were evaluated at different experimental moments. The data were submitted to ANOVA and compared by Kruskal Wallis, Friedman, Dunn, Tukey and Chi-square test (p≤0.05). Minimum cardiorespiratory alterations were observed and the group of the ropivacaíne combined with the butorphanol (G3) presented a more cranial blockage, what allowed the accomplishment of OSH without induction in six animals (75%) whereas most of the others needed anesthetic rescue. The results allow us to conclude that the use of ropivacaine sole or combinated with morphine, butorphanol or tramadol, for epidural anesthesia, didn't promote significant cardiorrespiratory depression and the ropivacaine associated to the butorphanol allowed the accomplishment of OSH in bitches.

O efeito do consumo abusivo de alvool no torque de remoção de implantes de titânio

Studies have reported that alcohol may lead to imbalance in bone formation and resorption, however, its effects on osseointegration of titanium implants continues to be an inconclusive subject. In this context, the aim of this study was to make a biomechanical evaluation of the effect of abusive alcohol consumption on the removal torque of osseointegrated titanium implants. Male Wistar rats (n=30) were divided into two experimental groups (15 each) receiving only water (Control) or 36% alcohol solution oral administration. Thirty days later, all animals were submitted to titanium implant (2.2 mm x 4 mm) placement in the right and left tibiae. The surgical alveoli were prepared with a 2 mm drill mounted in a counter-angle hand-piece (20:1 ratio, 35 Ncm torque at 1200 rpm) under abundant cooling. Five animals from each group were euthanized at 15, 30, and 60 days. Tibiae were submitted to reverse torque analysis. Data obtained were submitted to statistical analysis by the non-parametric Kruskal-Wallis and Dunn Tests (p < 0.05). Animals in the alcohol group presented lower removal torque values when compared with control group animals for all periods tested (p < 0.05). It can be concluded that abusive alcohol consumption can reduce the removal torque of titanium implants placed in rat tibiae, suggesting that alcohol may interfere in the osseointegration process of titanium implants.

O efeito do consumo abusivo de álcool no torque de remoção de implante de titânio

Studies have reported that alcohol may lead to imbalance in bone formation and resorption, however, its effects on osseointegration of titanium implants continues to be an inconclusive subject. In this context, the aim of this study was to make a biomechanical evaluation of the effect of abusive alcohol consumption on the removal torque of osseointegrated titanium implants. Male Wistar rats (n=30) were divided into two experimental groups (15 each) receiving only water (Control) or 36% alcohol solution oral administration. Thirty days later, all animals were submitted to titanium implant (2.2 mm x 4 mm) placement in the right and left tibiae. The surgical alveoli were prepared with a 2 mm drill mounted in a counter-angle hand-piece (20:1 ratio, 35 Ncm torque at 1200 rpm) under abundant cooling. Five animals from each group were euthanized at 15, 30, and 60 days. Tibiae were submitted to reverse torque analysis. Data obtained were submitted to statistical analysis by the non-parametric Kruskal-Wallis and Dunn Tests (p < 0.05). Animals in the alcohol group presented lower removal torque values when compared with control group animals for all periods tested (p < 0.05). It can be concluded that abusive alcohol consumption can reduce the removal torque of titanium implants placed in rat tibiae, suggesting that alcohol may interfere in the osseointegration process of titanium implants.