A formação continuada, o uso do computador e as aulas de ciências nos anos iniciais do ensino fundamental

The present article aims to discuss a process of continuing education which was focused on Science teaching and computer use considering the school as the locus of training. This process was intended for teachers who taught in the first years of Primary School. The research was developed with a qualitative approach, focusing on participant observation. It was aimed to characterize the educational practices, considering the elaboration of scientific knowledge, the development of experimental activities and the educational possibilities of the Information and Communication Technologies. The results reveal the involvement of the group in an attitude of research and reflection, and the utilization of collective spaces for constant discussion regarding the issues of classroom and teaching action.

Desempenho de movimentos cíclicos e discretos realizados em tarefa de Fitts simulada em computador

Performance of cyclical and discrete movements executed in Fitts’ task simulated by computer Abstract This study compared the performance of cyclical and discrete movements in Fitts’ task simulated by a computer. Twenty male adults, between 25 and 30 years old, participated as volunteers in the study. The software Discrete Aiming Task (v.2.0) simulated the Fitts’ task, in the discrete and cyclical conditions, and provided the movement time (TM). It was manipulated 4 target widths and 3 distances between the targets to provide index of difficulties (ID) from 1 to 6 bits. The ANOVA TWO WAY, 3 (Conditions) x 6 (ID), with repeated measures in the last factor, compared the TM in the different conditions. Regression analysis verified the relationship between TM x ID. There were no significant differences between the conditions; the virtual environment and the mouse were used to explain such results. All movement conditions showed a straight relationship between TM x ID with R²>0.990. Therefore, Fitts’ law showed to be consistent, independently of the movement strategy performed.

Análise e aferição de uma fresadora CNC através da utilização das tecnologias assistidas por computador, no escaneamento 3D de amostras e processamento de imagens

The use of computer-assisted technologies such as CAD - Computed Aided Design, CAM - Computed Aided Manufacturing, CAE - Computed Aided Engineering and CNC - Computed Numerical Control, are priorities in engineering and product designers. However, the dimensional measurement between the virtual and the real product design requires research, and dissemination procedures among its users. This work aims to use these technologies, through analysis and measurement of a CNC milling machine, designed and assembled in the university. Through the use of 3D scanning, and analyzing images of the machined samples, and its original virtual files, it was possible to compare the sizes of these samples in counterposition to the original virtual dimensions, we can state that the distortions between the real and virtual, are within acceptable limits for this type of equipment. As a secondary objective, this work seeks to disseminate and make more accessible the use of these technologies.

Simulação do impacto ambiental de uma proposta de programa de reciclagem no município de Cachoeira Paulista/SP

A reciclagem é uma importante ferramenta para a gestão dos Resíduos Sólidos Domiciliares, como cita a Política Nacional dos Resíduos Sólidos. Assim esta pesquisa visa quantificar o impacto ambiental que um programa de reciclagem, com o objetivo de reciclar 20% dos resíduos passíveis de reciclagem, causaria na cidade de Cachoeira Paulista/SP. Para isso, foi utilizado o Waste Reduction Model para simular os dados e calcular a Emissão dos Gases de Efeito Estufa (MTCO2E e MTCE) e quantidade de Energia (Kwh). Um programa de reciclagem de 20% tem oportunidade de reduzir, em um ano e em relação a situação sem reciclagem, aproximadamente em 49% a quantidade de CO2 e C equivalentes, além de economizar em Kwh o equivalente ao gasto por um mês de energia elétrica de 9400 residências.

Simulação de modelagem qualitativa para avaliação preliminar da qualidade da água na Bacia do Ribeirão das Perdizes em Campos do Jordão/SP, como subsídio ao enquadramento

The purpose of this research was to present the principles for the implementation of a future water body classification program at the UGRHI-1 (Management Unit of Water Resources-1/São Paulo, Brazil) using qualitative and quantitative water modeling. Our study area was in Campos do Jordão, a city in the state of São Paulo, specifically in the Perdizes river watershed, which is included in the UGRHI-1. The water quality assessment used a modeling mehtodology that can support a future study for the classification of water bodies in the region. The behavior of DO and BOD parameters was assessed in the water quality scenarios, considering the variations of flows, loads, reductions in withdrawals and different efficiencies in sewage treatment. The model used was QUAL2E developed by USEPA (United States Environmental Protection Agency) that received a new graphic interface named QUAL2R model. The reference flows Q7,10, Q95% and Qm used were obtained through the DAEE (Department of Water and Electric Energy) hydrologic regionalization method. It was noted that of the 9 proposed scenarios, only scenario 6 that was predicted in the flow regime Qm with the existence of a treatment system capable of removing 93% of the BOD, in the Perdizes River remained 67.5% of the time in class 2. Scenario 8 predicted a 50% reduction in In scenario 8 a reduction of 50% in the flow captured in CA-04, associated with the efficiency of 93% of BOD removal keeping the river in class 2. In scenario 9 the minimum required efficiency in sewage treatment in the flow regime Q95% for keeping the river in class 2 was also calculated and the value of 94.7% was obtained.

Simulação de sistemas de computação em nuvem para o iSPD

O uso de computação em nuvem tem se tornado cada vez mais intenso nos últimos anos. Devido principalmente a fatores econômicos, a avaliação de desempenho de sistemas de computação em nuvem, principalmente através de simulação, tem sido amplamente aplicada. Neste trabalho se apresenta a inclusão da funcionalidade de modelagem e simulação de computação em nuvem no simulador de ambientes distribuídos iSPD.

Simulação da nanoestruturação de nanofolhas de óxido de grafeno reduzido através de dinâmica molecular

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Simulação numérica de fluxo de águas subterrâneas na bacia do Rio Corrente (BA)

The numeric simulation is an important tool applied in understanding the dynamics of groundwater flow. In a hydrogeological model the processes responsible for groundwater flow are described by numerical formulations that allow the simplification, representation and understanding of the dynamics of the Aquifer System. In this work, a steady state groundwater flow simulation of Urucuia Aquifer System (UAS) part of the Corrente river basin was conducted, using the finite element method through software FEFLOW, to understand the dynamics of groundwater flow and quantify the hydrologic balance. The aquifer system Urucuia lodges in the São Francisco hydrogeological province and corresponds to a set of interconnected aquifers that occur in rocks from Urucuia group in the Urucuia sub-basin described by Campos e Dardenne (1997). The system is a porous media one, in a shape of a thick table mountain, consisting essentially of sandstones. The Corrente river basin is located in UAS in Western State of Bahia and it's one of the main units to maintaining permanent flow (Q95) and average natural flow of the São Francisco river. The simulation performed in this work obtained the following results for the modelled region: horizontal hydraulic conductivity of 3 x 10-4 m/s and vertical one 6 x 10-5 m/s; maximum recharge of 345 mm and minimum of 85 mm/a. It was concluded that: (1) regional groundwater flow has eastbound; with an exception of the extreme northeast portion, where the flow has opposite direction; (2) there are smaller water side dividers with an approximate direction EW, that guide the flow of water to the drainage that cut the aquifer; and (3) the UAS at Corrente river basin can be understood as a free regional aquifer system, isotropic and homogeneous. Regionally, the small lithological variations present in the Urucuia group can be neglected and do not exhibit significant influences on the dynamics of ground water flow

Simulação numérica de fluxo de águas subterrâneas do aquífero Rio Claro, na região do campus da UNESP - Rio Claro, SP

The water management in any area is highly important to the success of many business and also of life and the understanding of your relationship with the environment brings better control to its demand. I.e. hydrogeological studies are needed under better understanding of the behavior of an aquifer, so that its management is done so as not to deplete or harm it. The objective of this work is the numerical modeling in transient regime of a portion of the Rio Claro aquifer formation in order to get answers about its hydrogeological parameters, its main flow direction and also its most sensitive parameters. A literature review and conceptual characterization of the aquifer, combined with field campaigns and monitoring of local water level (NA), enabled the subsequent construction of the mathematical model by finite elements method, using the FEFLOW 6.1 ® computational algorithm. The study site includes the campus of UNESP and residential and industrial areas of Rio Claro city. Its area of 9.73 km ² was divided into 318040 triangular elements spread over six layers, totaling a volume of 0.25 km³. The local topography and geological contacts were obtained from previous geological and geophysical studies as well as profiles of campus wells and SIAGAS / CPRM system. The seven monitoring wells on campus were set up as observation points for calibration and checking of the simulation results. Sampling and characterization of Rio Claro sandstones shows up a high hydrological and lithological heterogeneity for the aquifer formation. The simulation results indicate values of hydraulic conductivity between 10-6 and 10-4 m / s, getting the Recharge/Rainfall simulation in transient ratio at 13%. Even with the simplifications imposed on the model, it was able to represent the fluctuations of local NA over a year of monitoring. The result was the exit of 3774770 m³ of water and the consequently NA fall. The model is considered representative for the...

Potenciais reativos e simulação de sistemas nanoscópicos

Pós-graduação em Física - IGCE

Análise morfométrica e simulação das áreas de preservação permanente de uma bacia hidrográfica

The morphometric characterization of watersheds is of great importance in assisting the planning of these areas to preserve the environment and maintain the quantity and quality of water production. The aim of this study was to characterize the morphology and simulate the areas of permanent preservation according to the Brazilian Forest Code of watershed of the Água-Fria stream. The studied area is located in the municipality of Bofete-SP, between the geographic coordinates: 48° 09' 30" to 48° 18' 30" longitude (WGr) and 22° 58' 30" to 23° 04' 30" latitude S. The results showed a 5th order micro watershed with an area of 152.43 km2 and low drainage density of 1.04 km/km2. Circularity was 0.51 and form factor was 0.41, which is considered low, and therefore with an oblong/oval shape. The sinuosity index of 1.29 revealed a tendency of rectilinear channels with compactness coefficient value of 1.38 and distance of runoff flow of 520m. Simulation of areas of permanent preservation shows an ideal model as the way springs and watercourses should be protected according to the Brazilian Forest Code, amounting to an area of 10.02 km2.

Simulação da produtividade de cana-de-açúcar (Saccharum officinarum L.) na região nordeste do Brasil, utilizando o modelo DSSAT

The objective of this study was to simulate the potential stem and sugar yield of sugar cane (Saccharum officinarum L.) in the Northeastern Brazil (Petrolina-PE and Teresina-PI) and analyze 4 varieties in different planting seasons in two environments: irrigated and rainfed cultivars. The model of simulation was DSSAT/CANEGRO (Decision Support System for Agrotechnology Transfer) and the four sugar cane varieties were as follows: RB86 7515, CTC 4, CTC 7 and CTC 20 (all in 1.5 year cycle). Analysis of variance was performed on the results and means were compared using the Tukey test with probability level at 5%. March is the recommended month for planting in Teresina, PI. In Petrolina, PE, rainfed planting is not advisable because of the extended water deficit all year long. In an irrigated environment, no difference was found concerning stem yield as a function of planting season, for all varieties in the study regions. The stem and sugar yields were always higher in irrigated environment as compared with those in rainfed environment in all municipalities and study varieties. The simulation model provided good estimate of stem and sugar yields as compared with experimental data in Teresina, PI.

Modelagem e simulação de transferência de calor em leito de partículas estacionárias sujeito a agitação intermitente

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influência de soluções de clorexidina e de própolis e da simulação de pressão pulpar na resistência de união dentinária

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)