Nitrogênio em cobertura e qualidade fisiológica e sanitária de sementes de painço (Panicum miliaceum L.)

O nitrogênio pode influenciar a qualidade das sementes de várias culturas e os seus efeitos variam com as condições ambientais e o estádio de desenvolvimento da planta em que a aplicação é realizada. Porém, pouco se sabe sobre a influência da adubação nitrogenada na qualidade de sementes da cultura do painço (Panicum miliaceum L.). O objetivo neste trabalho foi avaliar o efeito de doses e épocas de aplicação de nitrogênio em cobertura na qualidade fisiológica e sanitária de sementes de painço, cv. AL Tibagi, produzidas em condições de campo. As sementes foram produzidas no período de dezembro de 2005 a fevereiro de 2006 e as avaliações laboratoriais realizadas de março a agosto de 2006. O delineamento experimental foi de blocos ao acaso, em esquema fatorial 4 x 2, constituído pela combinação de quatro doses (0, 30, 60 e 120 kg ha-1 de N) e duas épocas de aplicação (14 e 28 dias após a emergência - DAE) do fertilizante nitrogenado (uréia) em cobertura, com quatro repetições. A aplicação de N aumentou o vigor das sementes, expresso pelos testes de envelhecimento acelerado e emergência em campo. A aplicação de nitrogênio aos 28 DAE da cultura do painço proporciona maiores IVE e porcentagem de emergência em campo. A sanidade de sementes de painço não é influenciada pelas doses e épocas de aplicação da adubação nitrogenada.

Controle químico de Panicum repens e Paspalum repens

Panicum repens e Paspalum repens são espécies infestantes de ambientes úmidos e alagados, freqüentes em margens de lagos, reservatórios, canais de irrigação e drenagem. O presente trabalho teve como objetivo avaliar a eficiência de diferentes herbicidas no controle dessas duas espécies. O experimento foi conduzido no Núcleo de Pesquisas Avançadas em Matologia, do Departamento de Produção Vegetal, pertencente à Faculdade de Ciências Agronômicas/UNESP, campus de Botucatu-SP. As plantas foram cultivadas em caixas d'água e as pulverizações foram realizadas utilizando-se um pulverizador costal pressurizado a CO2. Os tratamentos testados foram: glyphosate a 2.400, 3.360 e 4.320 g e.a. ha-1 + Aterbane 0,5% v/v, glyphosate a 2.400, 3.360 e 4.320 g e.a. ha-1 + Silwet 0.1% v/v, imazapyr a 750 e 1.500 g e.a. ha-1 e diquat a 400 e 800 g i.a. ha-1 (em aplicações seqüenciais de 200+200 g i.a. ha-1 e 400+400 g i.a. ha-1), além de uma testemunha sem aplicação de herbicidas. O delineamento experimental utilizado foi inteiramente casualizado, com quatro repetições. Avaliações visuais de controle foram realizadas, sendo a massa seca das plantas determinada ao final do estudo. O herbicida glyphosate na dose de 4.320 g e.a. ha-1, independentemente do adjuvante utilizado, assim como na dose de 3.360 g e.a. ha-1 com Aterbane, proporcionou bom controle de Panicum repens e, em todas as doses e adjuvantes testados, promoveu controle excelente de Paspalum repens. O herbicida imazapyr, independentemente da dose testada, apresentou resultados insatisfatórios no controle das plantas de Panicum repens, porém promoveu um excelente controle de Paspalum repens; o herbicida diquat, apesar das duas aplicações e independentemente da dose utilizada, mostrou-se ineficiente para controle das duas espécies.

Doses e épocas de aplicação de nitrogênio em cobertura na cultura do painço (Panicum miliaceum L.)

A cultura do painço é uma opção interessante tanto para a formação de palha para cobertura do solo como para a produção de grãos, pelo seu rápido crescimento, tolerância à seca e ciclo curto. No entanto, são escassas as informações sobre o manejo da adubação nitrogenada para essa cultura. Objetivou-se, neste estudo, avaliar o efeito de doses e épocas de aplicação de nitrogênio em cobertura nas características agronômicas e produtividade de grãos do painço. O delineamento experimental foi o de blocos ao acaso, em esquema fatorial 4x2, constituído pela combinação de quatro doses (0, 30, 60 e 120 kg ha-1 de N) e duas épocas de aplicação (14 e 28 dias após a emergência - DAE) do fertilizante nitrogenado (uréia) em cobertura, com quatro repetições. A adubação nitrogenada em cobertura promoveu aumento na altura da planta, comprimento da panícula e produtividade de grãos da cultura do painço, independentemente da época de aplicação. O número de grãos por panícula foi incrementado pela adubação nitrogenada apenas com a aplicação que foi realizada aos 14 DAE. A aplicação de N em cobertura, aos 14 dias após a emergência, proporcionou acréscimos nas características agronômicas, até a dose de 120 kg ha-1 (maior dose), acarretando aumento da produtividade de grãos do painço.

Morphomolecular characterization of Pleurotus ostreatus (Jacq. Fr.) kummer strains in relation to luminosity and temperature of frutification

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Parameterized fast decoupled power flow methods for obtaining the maximum loading point of power systems. Part I. Mathematical modeling

The conventional Newton and fast decoupled power flow (FDPF) methods have been considered inadequate to obtain the maximum loading point of power systems due to ill-conditioning problems at and near this critical point. It is well known that the PV and Q-theta decoupling assumptions of the fast decoupled power flow formulation no longer hold in the vicinity of the critical point. Moreover, the Jacobian matrix of the Newton method becomes singular at this point. However, the maximum loading point can be efficiently computed through parameterization techniques of continuation methods. In this paper it is shown that by using either theta or V as a parameter, the new fast decoupled power flow versions (XB and BX) become adequate for the computation of the maximum loading point only with a few small modifications. The possible use of reactive power injection in a selected PV bus (Q(PV)) as continuation parameter (mu) for the computation of the maximum loading point is also shown. A trivial secant predictor, the modified zero-order polynomial which uses the current solution and a fixed increment in the parameter (V, theta, or mu) as an estimate for the next solution, is used in predictor step. These new versions are compared to each other with the purpose of pointing out their features, as well as the influence of reactive power and transformer tap limits. The results obtained with the new approach for the IEEE test systems (14, 30, 57 and 118 buses) are presented and discussed in the companion paper. The results show that the characteristics of the conventional method are enhanced and the region of convergence around the singular solution is enlarged. In addition, it is shown that parameters can be switched during the tracing process in order to efficiently determine all the PV curve points with few iterations. (C) 2003 Elsevier B.V. All rights reserved.

Parameterized fast decoupled power flow methods for obtaining the maximum loading point of power systems. Part II. Performance evaluation

The parameterized fast decoupled power flow (PFDPF), versions XB and BX, using either theta or V as a parameter have been proposed by the authors in Part I of this paper. The use of reactive power injection of a selected PVbus (Q(PV)) as the continuation parameter for the computation of the maximum loading point (MLP) was also investigated. In this paper, the proposed versions obtained only with small modifications of the conventional one are used for the computation of the MLP of IEEE test systems (14, 30, 57 and 118 buses). These new versions are compared to each other with the purpose of pointing out their features, as well as the influence of reactive power and transformer tap limits. The results obtained with the new approaches are presented and discussed. The results show that the characteristics of the conventional FDPF method are enhanced and the region of convergence around the singular solution is enlarged. In addition, it is shown that these versions can be switched during the tracing process in order to efficiently determine all the PV curve points with few iterations. A trivial secant predictor, the modified zero-order polynomial, which uses the current solution and a fixed increment in the parameter (V, theta, or mu) as an estimate for the next solution, is used for the predictor step. (C) 2003 Elsevier B.V. All rights reserved.

Maximum Phonation Time and s/z Ratio in a Large Child Cohort

Aim. The purpose of this study was to provide normal values for maximum phonation time (MPT) and the s/z ratio by examining 1660 children aged 4-12 years and without vocal signs or symptoms.Methods. The technique was based on the sustained emission of the /a/ vowel and fricatives /s/ and /z/.Results. The average of the MPT in children of the different age groups was as follows: 6.09 seconds for the age group 4-6 years (males, 5.97; female, 6.21 seconds), 7.94 seconds for the age group 7-9 years (males, 8.07; females, 7.79 seconds), and 8.98 for the age group 10-12 years (males, 9.05; females, 8.92 seconds). The overall average for males was 7.78 and females 7.64 seconds. The s/z ratio was near 1.0 in most children but above 1.2 in 133 children and below 0.8 in 133 children.Conclusion. These values of MPT and s/z ratio can be used as normative in further pediatric studies.

Comparative evaluation of the efficacy of occlusal splints fabricated in centric relation or maximum intercuspation in temporomandibular disorders patients

Fabrication of occlusal splints in centric relation for temporomandibular disorders (TMD) patients is arguable, since this position has been defined for asymptomatic stomatognathic system. Thus, maximum intercuspation might be employed in patients with occlusal stability, eliminating the need for interocclusal records. This study compared occlusal splints fabricated in centric relation and maximum intercuspation in muscle pain reduction of TMD patients. Twenty patients with TMD of myogenous origin and bruxism were divided into 2 groups treated with splints in maximum intercuspation (I) or centric relation (II). Clinical, electrognathographic and electromyographic examinations were performed before and 3 months after therapy. Data were analyzed by the Student's t test. Differences at 5% level of probability were considered statistically significant. There was a remarkable reduction in pain symptomatology, without statistically significant differences (p>0.05) between the groups. There was mandibular repositioning during therapy, as demonstrated by the change in occlusal contacts on the splints. Electrognathographic examination demonstrated a significant increase in maximum left lateral movement for group I and right lateral movement for group II (p<0.05). There were no significant differences (p>0.05) in the electromyographic activities at rest after utilization of both splints. In conclusion, both occlusal splints were effective for pain control and presented similar action. The results suggest that maximum intercuspation may be used for fabrication of occlusal splints in patients with occlusal stability without large discrepancies between centric relation and maximum intercuspation. Moreover, this technique is simpler and less expensive.

Maximum inhibitory dilution of mouthwashes containing chlorhexidine and polyhexamethylene biguanide against salivary Staphylococcus aureus

Objective: The aim of the present study was to determine the in vitro maximum inhibitory dilution (MID) of two chlorhexidine-based oral mouthwashes (CHX): Noplak (R), Periogard (R), and one polyhexamethylene biguanide-based mouthwash (PHMB): Sanifill Premium (R) against 28 field Staphylococcus aureus strains using the agar dilution method. Materials and Methods: For each product, decimal dilutions ranging from 1/10 to 1/655,360 were prepared in distilled water and added to Mueller Hinton Agar culture medium. After homogenization, the culture medium was poured onto Petri dishes. Strains were inoculated using a Steers multipoint inoculator and dishes were incubated at 37 degrees C for 24hours. For reading, MID was considered as the maximum dilution of the mouthwash still capable of inhibiting microbial growth. Results: Sanifill Premium (R) inhibited the growth of all strains at 1/40 dilution and of 1 strain at 1/80 dilution. Noplak (R) inhibited the growth of 23 strains at 1/640 dilution and of all 28 strains at 1/320 dilution. Periogard (R) showed inhibited growth of 7 strains at 1/640 dilution and of all 28 strains at 1/320 dilution. Data were submitted to Kruskal-Wallis statistical test, showing significant differences between the mouthwashes evaluated (p<0.05). No significant difference was found between Noplak (R) and Periogard (R) (p>0.05). Sanifill Premium (R) was the least effective (p<0.05). Conclusion: It was concluded that CHX-based mouthwashes present better antimicrobial activity against S. Aureus than the PHMB-based mouthwash.

Determination of the maximum inhibitory dilution of cetylpyridinium chloride-based mouthwashes against Staphylococcus aureus: an in vitro study

The aim of this in vitro study was to determine the maximum inhibitory dilution (MID) of four cetylpyridinium chloride (CPC)based mouthwashes: CPC+Propolis, CPC+Malva, CPC+Eucaliptol+Jua+Roma+Propolis (Natural Honey (R)) and CPC (Cepacol (R)), against 28 Staphylococcus aureus field strains, using the agar dilution method. Decimal dilutions ranging from 1/10 to 1/655,360 were prepared and added to Mueller Hinton Agar. Strains were inoculated using Steers multipoint inoculator. The inocula were seeded onto the surface of the culture medium in Petri dishes containing different dilutions of the mouthwashes. The dishes were incubated at 37 degrees C for 24 h. For readings, the MID was considered as the maximum dilution of mouthwash still capable of inhibiting microbial growth. The obtained data showed that CPC+Propolis had antimicrobial activity against 27 strains at 1/320 dilution and against all 28 strains at 1/160 dilution, CPC+Malva inhibited the growth of all 28 strains at 1/320 dilution, CPC+Eucaliptol+Jua+Roma+Propolis inhibited the growth of 2 strains at 1/640 dilution and all 28 strains at 1/320 dilution, and Cepacol (R) showed antimicrobial activity against 3 strains at 1/320 dilution and against all 28 strains at 1/160 dilution. Data were submitted to Kruskal-Wallis test, showing that the MID of Cepacol (R) was lower than that determined for the other products (p<0.05). In conclusion, CPC-mouthwashes showed antimicrobial activity against S. aureus and the addition of other substances to CPC improved its antimicrobial effect.

Estrutura do pericarpo e da semente de Astronium graveolens Jacq. (Anacardiaceae) com notas taxonômicas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effects of prolonged running performed at the intensity corresponding to the onset of blood lactate accumulation, on maximum isokinetic strength in active non-athletic individuals

OBJETIVO: O objetivo deste estudo foi analisar os efeitos da corrida contínua prolongada realizada na intensidade correspondente ao início do acúmulo do lactato no sangue (OBLA) sobre o torque máximo dos extensores do joelho analisado em diferentes tipos de contração e velocidade de movimento em indivíduos ativos. MÉTODO: Oito indivíduos do gênero masculino (23,4 ± 2,1 anos; 75,8 ± 8,7 kg; 171,1 ± 4,5 cm) participaram deste estudo. Primeiramente, os sujeitos realizaram um teste incremental até a exaustão voluntária para determinar a velocidade correspondente ao OBLA. Posteriormente, os sujeitos retornaram ao laboratório em duas ocasiões, separadas por pelo menos sete dias, para realizar 5 contrações isocinéticas máximas para os extensores do joelho em duas velocidades angulares (60 e 180º.s-1) sob as condições excêntrica (PTE) e concêntrica (PTC). Uma sessão foi realizada após um período de aquecimento padronizado (5 min a 50%VO2max). A outra sessão foi realizada após uma corrida contínua no OBLA até a exaustão voluntária. Essas sessões foram executadas em ordem randômica. RESULTADOS: Houve redução significante do PTC somente a 60º.s-1 (259,0 ± 46,4 e 244,0 ± 41,4 N.m). Entretanto, a redução do PTE foi significante a 60º.s-1 (337,3 ± 43,2 e 321,7 ± 60,0 N.m) e 180º.s-1 (346,1 ± 38,0 e 319,7 ± 43,6 N.m). As reduções relativas da força após o exercício de corrida foram significantemente diferentes entre os tipos de contração somente a 180º.s-1. CONCLUSÃO: Podemos concluir que, em indivíduos ativos, a redução no torque máximo após uma corrida contínua prolongada no OBLA pode ser dependente do tipo de contração e da velocidade angular.

Maximum entropy, fractal dimension and lacunarity in quantification of cellular rejection in myocardial biopsy of patients submitted to heart transplantation

This paper presents a method for the quantification of cellular rejection in endomyocardial biopsies of patients submitted to heart transplant. The model is based on automatic multilevel thresholding, which employs histogram quantification techniques, histogram slope percentage analysis and the calculation of maximum entropy. The structures were quantified with the aid of the multi-scale fractal dimension and lacunarity for the identification of behavior patterns in myocardial cellular rejection in order to determine the most adequate treatment for each case.

A Weak Maximum Principle for Optimal Control Problems with Nonsmooth Mixed Constraints

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)