Impact of Quantity of Resin, C-factor, and Geometry on Resin Composite Polymerization Shrinkage Stress in Class V Restorations

Objective: This study evaluated the effect of quantity of resin composite, C-factor, and geometry in Class V restorations on shrinkage stress after bulk fill insertion of resin using two-dimensional finite element analysis.Methods: An image of a buccolingual longitudinal plane in the middle of an upper first premolar and supporting tissues was used for modeling 10 groups: cylindrical cavity, erosion, and abfraction lesions with the same C-factor (1.57), a second cylindrical cavity and abfraction lesion with the same quantity of resin (QR) as the erosion lesion, and then all repeated with a bevel on the occlusal cavosurface angle. The 10 groups were imported into Ansys 13.0 for two-dimensional finite element analysis. The mesh was built with 30,000 triangle and square elements of 0.1 mm in length for all the models. All materials were considered isotropic, homogeneous, elastic, and linear, and the resin composite shrinkage was simulated by thermal analogy. The maximum principal (MPS) and von Mises stresses (VMS) were analyzed for comparing the behavior of the groups.Results: Different values of angles for the cavosurface margin in enamel and dentin were obtained for all groups and the higher the angle, the lower the stress concentration. When the groups with the same C-factor and QR were compared, the erosion shape cavity showed the highest MPS and VMS values, and abfraction shape, the lowest. A cavosurface bevel decreased the stress values on the occlusal margin. The geometry factor overcame the effects of C-factor and QR in some situations.Conclusion: Within the limitations of the current methodology, it is possible to conclude that the combination of all variables studied influences the stress, but the geometry is the most important factor to be considered by the operator.

Ácido 2,3,5-tri-iodobenzoico (TIBA) na micropropagação de abacaxizeiro 'IAC Gomo-de-Mel'

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Determinação de parâmetros reológicos de argamassas e concreto através de técnicas alternativas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relação entre projeção do centro de gravidade e equilíbrio em idosos

During the aging process, increase the postural asymmetries that can affect the control mechanism of balance leading to falls. To evaluate the static posture of elderly; measure the balance and correlate the results of the posture with balance. The study involved 28 elderly patients, 13 males and 15 females (71.8 ± 5.7 years). The volunteers were photographed, the images transferred to a computer for evaluation of static posture and calculating the projection of the center of gravity in the frontal and sagittal planes using the Postural Assessment Software. The balance was assessed by the Berg Balance Scale (BBS). Correlations were performed by Spearman test (p ≤ 0.05). Data were presented as mean ± standart deviation (SD). BBS scores = 50.5 ± 3.3; the sagittal plane (anterior asymmetry) = 45.5 ± 11.1%; frontal plane (right or left asymmetry) = 9.8 ± 7.9. We found a correlation between BBS and asymmetry of the sagittal plane (r = -0.46, p = 0.01) and between BBS and asymmetry of the frontal plane (r = -0.41, p = 0.03). The data suggest that the higher the previous projection (asymmetry of the sagittal plane) and lateral projection (asymmetry of the frontal plane), scores of the BBs will be lower, indicating an increase of unbalance in elderly.

Synthesis, characterization, thermal behavior, and DFT calculation of solid 1,4-bis(3-carboxy-3-oxo-prop-1-enyl) benzene of some trivalent lanthanides

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effects of meloxicam administration on physiological and performance responses of transported feeder cattle

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Neoplecostomus doceensis: a new loricariid species (Teleostei, Siluriformes) from the rio Doce basin and comments about its putative origin

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

FLUXOFENIM USED AS A SAFENER ON SORGHUM SEED FOR S-METOLACHLOR HERBICIDE

This study aimed to evaluate the efficiency of protective fluxofenim seed treatment of sorghum hybrids DKB510 and SCG340, in order to increase the selectivity to the herbicide S-metolachlor applied pre-emergence and to determine the activity of detoxification enzyme glutathione S-transferase (GST). This work was divided into two stages. The first step consisted of field evaluation of the effectiveness of the shield to reduce visual symptoms of plant injury caused by the herbicide and the second determined the activity of GST. It was compared the susceptibility of sorghum seeds to the herbicide by means of visual assessment of injuries at 3, 7, 15 and 30 days after emergence (DAE), root dry weight and shoot at 10 DAE, and determination of activity GST. The treatments were: application of the safener dose at 0 and 40 mL per 100 kg of seed, and spraying of the herbicide S-metolachlor at rates of 1,440 and 2,880 g a.i. ha(-1), and a control without herbicide. The safener use to seed treatment for both sorghum hybrids (DKB510 and SCG340) increased tolerance to the herbicide S-metolachlor in two doses, and the best results were obtained at a dose of 1,440 g ha(-1). The GST enzyme activity showed an increase when using the fluxofenim prior to application of the herbicide S-metolachlor at a dose of 1,440 g ha(-1) for the two hybrids.

Biological studies of puccina species using germinatelia

Despite the importance of plant pathogens belonging to the Order Pucciniales (=Uredinales), popularly called rusts, certain peculiarities of its biology is poorly known, mainly due to the difficulty of growing them in culture media and also by the lack of appropriate methodologies for the development of research. Therefore, this study was to verify the efficiency of apparatus called germinatelia to obtain data about the basidiospores production biology of different Pucciniales species. Were used in the study Puccinia pampeana, P. psidii, P. pelargonii-zonalis, P. arachidis, P. mogiphanis, P. emiliae, P. hetereospora, P. malvacearum and P. cnici-oleracei. The use of germinatelia have revealed high basidiospores production for a period up to 5 months at temperatures between 12 degrees and 21 degrees C. Furthermore, in P. malvacearum was possible to record the germination by repetition (survival strategy) in 4.5% of basidiospores produced. All species were favored to mild temperatures. These results therefore demonstrate that the use of germinatelios is efficient, assisting in obtaining data about the biology and cycles of different Puccinia species, enabling better understanding of these pathogens, resulting in management and control measures most appropriate/accurate.

Estudo da influência do lineamento Tibagi e Sinclinal de Torres na estruturação da porção norte da bacia de Pelotas

The area of this work is located along the Northern portion of the Pelotas´s basin. The onshore region extends from the Southern portion São Paulo State to the North of Rio Grande do Sul State, with a total area of 440 530 km ². The objective of the research is to characterize the main geological structures of the outcropping basement in the Paraná Basin and its correlation with the offshore portion of the Pelotas Basin. The characterization was performed through the integration of surface (SRTM images and outcrops) and subsurface data (seismic data and well logs), the method includes the use of remote sensing techniques and seismic interpretation. The main structures to be analyzed are the Tibagi Lineament and the “Torres Syncline in order to verify its influence on the geological evolution and deformation of the basin. As result, it was identified the continuity of the both structures inside the offshore basin (Pelotas Basin); but only the Tibagi Lineament represents an important structural feature in the offshore basin. In this sense, the Tibagi lineament shows a NW-SE direction along the both basins (Pelotas and Paraná) and it is defined by drainages and relief on the continental portion. It was classified as a graben structure limited by normal faults and it also was verified a trend of faults inside the lineament that cuts all the sedimentary package of Itararé Group from Paraná Basin. The Torres syncline is a structure that connects the arches of Ponta Grossa and Rio Grande, showing NW-SE orientation and a low angle dip in the NW direction. Its projection into the Pelotas Basin was not recognized by the methods applied in this work, because a preliminary analyze indicates that its projection corresponds to a structural high inside the Pelotas Basin

Avaliação in vivo do potencial estrogênico de amostra de água para consumo humano produzida por estação de tratamento do estado de São Paulo

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Function inferences from a molecular structural model of bacterial ParE toxin

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Simultaneous determination of chromium and nickel in medicinal plants by slurry sampling graphite furnace atomic absorption spectrometry

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Utilização do meloxicam para reduzir respostas Inflamatórias em bovinos de corte transportados

Pós-graduação em Zootecnia - FMVZ

Desempenho produtivo e respostas hematológicas da Tilápia- do-Nilo submetida a diferentes níveis de proteína e condições de estresse

Pós-graduação em Zootecnia - FMVZ