Parâmetros eletrocardiográficos e cardiovasculares em cães anestesiados pelo isofluorano e submetidos à hipovolemia aguda

Avaliaram-se os efeitos da hipovolemia aguda em cães anestesiados pelo isofluorano sobre a eletrocardiografia com a duração e amplitude da onda P (Pms e PmV, respectivamente); intervalo entre as ondas P e R (P-R); duração do complexo QRS (QRS); amplitude da onda R (RmV); intervalo entre as ondas Q e T (Q-T) e intervalo entre as duas ondas (R-R), freqüência cardíaca (FC), índice cardíaco (IC), índice sistólico (IS) e pressões arteriais sistólica (PAS), diastólica (PAD) e média (PAM). Verificou-se também a possível influência do anestésico sobre a resposta compensatória à hipovolemia aguda. Para tal, foram utilizados 20 cães hígidos, sem raça definida, adultos, machos e fêmeas. Induziu-se a anestesia geral com isofluorano por meio de máscara naso-oral a 2,5 CAM e, após a intubação orotraqueal, o vaporizador foi ajustado em 1,5 CAM. Induziu-se a hipovolemia nos animais retirando-se volume total de 35 mlkg-1 de sangue. As mensurações foram realizadas antes da hipovolemia (M0), imediatamente após a retirada do volume total de sangue calculado (M1), e aos dez (M2), trinta (M3) e sessenta (M4) minutos. A avaliação estatística das variáveis foi efetuada por meio de Análise de Variância (ANOVA), seguida pelo teste de Tukey, considerando nível de significância de 5% (P<0,05). Houve redução do tempo de condução elétrica átrio-ventricular, aumento da impedância da musculatura ventricular, redução da freqüência cardíaca, dos índices cardíacos e sistólico, porém sem alteração na despolarização ventricular, sendo que o isofluorano não influenciou no desencadeamento da resposta compensatória à hipovolemia aguda.

Cerâmicas eletrônicas à base de SnO2 e TiO2

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito do Pr2O3 nas propriedades elétricas de varistores à base de SnO2

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Electrical and microstructural properties of microwave sintered SnO2-based varistors

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Caracterização elétrica de blocos varistores à base de SnO2

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Correlações entre os níveis de L-carnitina plasmática, o estado nutricional e a função ventilatória de portadores de doença pulmonar obstrutiva crônica

OBJETIVO: Avaliar os níveis de L-carnitina livre no plasma, o estado nutricional, a função pulmonar e a tolerância ao exercício em pacientes com doença pulmonar obstrutiva crônica e verificar as correlações entre a composição corporal e as frações de L-carnitina no plasma. MÉTODOS: Quarenta pacientes entre 66,2±9 anos, com diagnóstico clínico de doença pulmonar obstrutiva crônica, foram divididos em dois grupos: G1, com índice de massa corporal menor que 20kg/m², e G2, com índice de massa corporal maior que 20kg/m². Foram mensurados os parâmetros espirométricos, a tolerância ao exercício no teste de caminhada, a força muscular respiratória, a composição corporal por meio da impedância bioelétrica e as dosagens da L-carnitina plasmática, através de amostras de sangue. RESULTADOS: Foram observados menores valores das variáveis espirométricas (p<0,01), da força muscular respiratória e dos níveis de L-carnitina nos pacientes do G1; porém, não houve diferença entre os grupos quanto à capacidade de realizar exercício físico dinâmico de baixa intensidade. Correlações significativas entre o percentual de gordura e os níveis de L-carnitina plasmática foram observadas nos pacientes (r=0,53 com p<0,002); sendo que, nos pacientes com índice de massa corporal menor que 18kg/m², essa relação aumentou (r<0,73 com p<0,01). CONCLUSÃO: Na doença pulmonar obstrutiva crônica, a desnutrição está associada tanto aos prejuízos da função pulmonar e da força muscular respiratória, quanto aos baixos níveis de L-Carnitina plasmática.

Grain size effect on the electrical response of SnO2 thin and thick film gas sensors

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Electrochemical stability of SnO2-based coated Ti electrodes

The electrochemical behavior of SnO2-SbOx, based electrodes, with and without the addition of RuO2, was studied by cyclic voltammetry, service life measurements and electrochemical impedance spectroscopy in 0.5 M H2SO4 the physical characteristics of these materials were investigated using SEM, EDX and XRD. The resulting cyclic voltammograms obtained using SnO2-SbOx, and SnO2-SbOx-RuO2(x), x = 30, 5, 1 and 0.4 % showed that the OER overpotential decreased with the addition of RuO2. In the repetitive triangular potential voltammetry applied to the SnO2 electrode without and with RuO2 (1%), a higher anodic current is observed during the first potential scan; it is explained in terms of the oxidation of the Ti substrate. The addition of 1% RuO2 increased the service life from 8 to 20 hours at 10 mAcm(-2), while at 50 mAcm(-2) this increase was from 1 to 8 hours. AC Impedance diagrams obtained for the Ti/SnO2-SbOx and Ti/SnO2-SbOx-RuO2 electrodes at the rest potential and at a potential in the OER region can be explained by a single equivalent circuit containing two elements in series. The results showed that the charge transfer resistance and the resistance of the oxide film are lower in the oxide film containing RuO2. Surface analysis of Ti/SnO2-SbOx, revealed that it is relatively porous and formed by clusters of small particles. The Ti/SnO2-SbOx-RuO2 (1%) film is more compact, though. XRD analysis showed that a Sn1-xTixO2 oxide is formed on the Ti/SnO2-SbOx with 1% and without RuO2 electrodes.

Electrochemical behavior of metallic chromium in chloride media

The electrochemical behavior of metallic chromium in aqueous solutions containing chloride ions at different pH was studied by means of open-circuit potential vs. time measurements, cyclic voltammetry and electrochemical impedance spectroscopy. The composition of the surface oxides was analyzed by XPS. For solutions with pH<3 the formation of a passive layer occurs via a dissolution/precipitation process while for pH>3 the mechanism changes. XPS analysis revealed that Cr2O3 basically constitutes the passive layer.

The use of Langmuir-Blodgett films of a perylene derivative and polypyrrole in the detection of trace levels of Cu2+ ions

Langmuir films of a tetracarboxylic perylene derivative and polypyrrole display condensed surface pressure isotherms that are shifted when Cu2+ ions are added to the ultrapure water subphase. These films were transferred onto interdigitated gold electrodes leading to Y-type Langmuir-Blodgett (LB) films. The electrodes modified with 5-layer LB films were immersed into a flask with ultrapure water and water containing Cu2+ ions at concentrations ranging from mM to muM. Impedance measurements indicated a distinct electrical response for the two types of films. Although the materials chosen have no specificity for ionic metals, they can be combined for detecting trace levels of Cu2+, which may be exploited in water quality monitoring. (C) 2004 Elsevier B.V. All rights reserved.

Short term hydroelectric scheduling combining network flow and interior point approaches

In this paper, short term hydroelectric scheduling is formulated as a network flow optimization model and solved by interior point methods. The primal-dual and predictor-corrector versions of such interior point methods are developed and the resulting matrix structure is explored. This structure leads to very fast iterations since it avoids computation and factorization of impedance matrices. For each time interval, the linear algebra reduces to the solution of two linear systems, either to the number of buses or to the number of independent loops. Either matrix is invariant and can be factored off-line. As a consequence of such matrix manipulations, a linear system which changes at each iteration has to be solved, although its size is reduced to the number of generating units and is not a function of time intervals. These methods were applied to IEEE and Brazilian power systems, and numerical results were obtained using a MATLAB implementation. Both interior point methods proved to be robust and achieved fast convergence for all instances tested. (C) 2004 Elsevier Ltd. All rights reserved.

EFFECT OF CR2O3 ON THE ELECTRICAL-PROPERTIES OF MULTICOMPONENT ZNO VARISTORS AT THE PREBREAKDOWN REGION

The effect of Cr2O3 on the electrical properties of the multicomponent ZnO varistors was investigated using voltage-current curves and impedance spectroscopy. The structure and morphological modifications were analysed by X-ray diffraction and scanning electron microscopy, respectively. It was observed in samples with addition 0.1 mol% Cr2O3 that there was an improvement in the electrical properties of the varistors, but the increase in concentration had a deleterious effect on the potential barrier at the grain boundary. The excess Cr2O3 segregates at the grain-boundary region and increases the donor concentration, leading to a higher leakage current.

Nonlinear electrical behaviour of the Cr2O3, ZnO, CoO and Ta2O5-doped SnO2 varistors

The effects of Cr2O3 on the properties of (Zn, Co, Ta)-doped SnO2 varistors were investigated in this study. The samples with different Cr2O3 concentrations were sintered at 1400 degrees C for 2 h. The properties of (Zn, Co, Ta, Cr)-doped SnO2 varistors were evaluated by XRD. dilatornetry, SEM, I-V and impedance spectroscopy. DC electrical characterization showed a dramatic increase ill the breakdown electrical field and in the nonlinear coefficient with the increase in Cr2O3 concentration. The grain size was found to decrease from 13 to 5 mu m with increasing the Cr2O3 content. The impedance data, represented by means of Nyquist diagrams, show two time constants, one at low frequencies and the other at high frequencies. (c) 2005 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

Development and testing of anode-supported solid oxide fuel cells with slurry-coated electrolyte and cathode

A laboratory setup was designed and put into operation for the development of solid oxide fuel cells (SOFCs). The whole project consisted of the preparation of the component materials: anode, cathode and electrolyte, and the buildup of a hydrogen leaking-free sample chamber with platinum leads and current collectors for measuring the electrochemical properties of single SOFCs. Several anode-supported single SOFCs of the type (ZrO(2):Y(2)O(3)+NiO) thick anode/(ZrO(2):Y(2)O(3)) thin electrolyte/(La(0.65)Sr(0.35)MnO(3)+ZrO(2):Y(2)O(3)) thin cathode have been prepared and tested at 700 and 800 degrees C after in situ H(2) anode reduction. The main results show that the slurry-coating method resulted in single-cells with good reproducibility and reasonable performance, suggesting that this method can be considered for fabrication of SOFCs. (c) 2005 Elsevier B.V. All rights reserved.

Metal-insulator transitions and magnetic ordered states in oxygen-depleted manganites

The use of AC/DC magnetic susceptibility and impedance measurements to detect oxygen depletion effects in La0.7Ca0.3MnO3 +/-delta and NiMn2O4+delta spinel-type compounds is reported. For the NiMn2O4, for which no Mn4+ was found, three superposed Debye relaxations were observed in the range 260-180 K. Otherwise, in La0.7Ca0.3MnO3, the argon annealed has contributed to a decrease in T-C, but the amount of Mn4+ is still too high to allow the observation of a relaxation in this frequency window. (c) 2006 Elsevier B.V. All rights reserved.