Theoretical study of the stoichiometric and reduced Ce-Doped TiO2 anatase (001) surfaces

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

In vitro enamel remineralization capacity of composite resins containing sodium trimetaphosphate and fluoride

This study evaluated the in vitro enamel remineralization capacity of experimental composite resins containing sodium trimetaphosphate (TMP) combined or not with fluoride (F). Bovine enamel slabs were selected upon analysis of initial surface hardness (SH1) and after induction of artificial carious lesions (SH2). Experimental resins were as follows: resin C (control-no sodium fluoride (NaF) or TMP), resin F (with 1.6 % NaF), resin TMP (with 14.1 % TMP), and resin TMP/F (with NaF and TMP). Resin samples were made and attached to enamel slabs (n = 12 slabs per material). Those specimens (resin/enamel slab) were subjected to pH cycling to promote remineralization, and then final surface hardness (SH3) was measured to calculate the percentage of surface hardness recovery (%SH). The integrated recovery of subsurface hardness (ΔKHN) and F concentration in enamel were also determined. Data was analyzed by ANOVA and Student-Newman-Keuls test (p < 0.05). Resins F and TMP/F showed similar SH3 values (p = 0.478) and %SH (p = 0.336) and differed significantly from the other resins (p < 0.001). Considering ΔKHN values, resin TMP/F presented the lowest area of lesion (p < 0.001). The presence of F on enamel was different among the fluoridated resins (p = 0.042), but higher than in the other resins (p < 0.001). The addition of TMP to a fluoridated composite resin enhanced its capacity for remineralization of enamel in vitro. The combination of two agents with action on enamel favored remineralization, suggesting that composite resins containing sodium trimetaphosphate and fluoride could be indicated for clinical procedures in situations with higher cariogenic challenges.

In vitro effect of sodium trimetaphosphate additives to conventional toothpastes on enamel demineralization

The aim of this study was to evaluate the ability of conventional toothpastes (1100 ppm F) supplemented with sodium trimetaphosphate (TMP) in demineralization. Blocks of enamel were selected and then divided into seven experimental groups of 12: toothpaste without F and TMP (placebo), toothpaste with 1100 ppm F (1100), and toothpaste with 1100 ppm F supplemented with TMP-1 % (1100 1 % TMP), 3 % (1100 3 % TMP), 4.5 % (1100 4.5 % TMP), 6 % (1100 6 % TMP), and 9 % (1100 9 % TMP). Blocks were subjected to five pH cycles (demineralizing/remineralizing solutions) at 37 °C and treated with toothpaste slurries twice daily, after which the blocks were maintained for 2 days in fresh remineralizing solution. Following treatments, surface hardness (SHf) and cross-sectional hardness were determined for calculating the integrated loss of subsurface hardness (ΔKHN). The fluoride present in the enamel was also measured. The SHf and ΔKHN measurements showed that supplementation with 3 % TMP was the most effective (p < 0.001) and showed greater concentration of F in the enamel (p < 0.001). Addition of 3 % TMP to a conventional toothpaste (1100 ppm F) showed greater efficacy in reducing enamel demineralization. Fluoride toothpastes containing trimetaphosphate possess good anticaries potential required to reduce the prevalence of dental caries in high-risk patients.

In situ remineralizing effect of fluoride varnishes containing sodium trimetaphosphate

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Synergistic effect of fluoride and sodium hexametaphosphate in toothpaste on enamel demineralization in situ

To evaluate the effect of a fluoride dentifrice containing sodium hexametaphosphate (HMP) on enamel demineralization in situ. This double-blind and cross-over study consisted of 3 phases (7 days each) in which 12 volunteers wore intraoral appliances containing four enamel bovine blocks. Specimens were treated (3×/day) with placebo (no F or HMP), 1100ppm F (1100F) and 1100F plus HMP1% (1100F-HMP1%) toothpastes, and the cariogenic challenge was performed using a 30% sucrose solution (6×/day). Final surface hardness, the percentage of surface hardness loss (%SH), the integrated loss of subsurface hardness (ΔKHN), as well as enamel calcium (Ca), phosphorus (P) and firmly-bound fluoride (F) were determined. Also, biofilm formed on the blocks were analyzed for F, Ca, P and insoluble extracellular polysaccharide (EPS) concentrations. Data were submitted 1-way ANOVA, followed by Student-Newman-Keuls' test (p<0.05). 1100F-HMP1% promoted the lowest %SH and ΔKHN among all groups (p<0.001). The addition of HMP1% to 1100F did not enhance enamel F uptake, but significantly increased enamel Ca concentrations (p<0.001). Similar EPS concentrations were seen for 1100F-HMP1% and 1100F groups (p>0.05). All the groups were supersaturated with respect to HA. However, only 1100F-HMP1% group was supersaturated with respect to CaF2 (p<0.05). The ionic activities of F(-), CaF(+) and HF(0) for the 1100F-HMP1% group were the highest among all groups (p<0.001). The addition of HMP1% to a conventional toothpaste significantly reduces enamel demineralization in situ when compared to 1100F. This dentifrice could be a viable alternative to patients at high risk of caries.

Injeção de ar via irrigação por gotejamentos superficial e subsuperficial na cultura da alface

Pós-graduação em Agronomia (Irrigação e Drenagem) - FCA

Diagnóstico ambiental em área com vazamento de combustíveis por meio da integração de dados geofísicos e geoquímicos no município de São Manuel - SP

The contamination of the physical environment occurs as a result of the lack of planning and inadequate management of hazardous products. Due to the difficulty of the characterization and study of soil and groundwater, the contamination has been long neglected. The characterization of these areas by research techniques through direct methods such as physical and chemical analysis, are widely used in the diagnosis and monitoring. However, despite presenting quantitative results, this method is not representative in spatial terms. The purpose of this work is to bring geophysical complementation with the diagnosis, bringing the spatial element for the detection of the contamination plume. In the study area, there was a railway accident in 1999 in which three wagons fell and spilled 240,000 L of diesel onto the soil. The main objective is to assess the presence of contaminants in the residual phase and dissolved in the subsurface, using the technique of Electrical Tomography (ETR), understand the effects of natural attenuation process in the degradation of hydrocarbons and changes in electrical properties in soil and groundwater. The results allowed the definition of three distinct patterns of resistivity region with presence of dissolved phase, set in a historical chemical analyzes: low values (> 60Ω.m) associated with the presence of hydrocarbons in an advanced stage of degradation, intermediate values (260Ω.me 511Ω .m) indicative of coexistence of residual hydrocarbons and dissolved phase, and high values (> 1000Ω.m), which reveal the prevalence of residual phase with incipient degradation, possibly in high toxicity concentrations for effective action of biodegradation processes. The diagnostic of areas with potential accumulation of residual phase can subsidize the planning of remediation techniques and promote the complete decontamination of the area

Prospecção geofísica entre as ocorrências cupríferas Capão Grande e Victor Teixeira, Caçapava do Sul - RS

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Métodos geoelétricos aplicados ao diagnóstico ambiental subsuperficial do Cemitério Municipal de Rio Claro, SP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A cartografia geomorfológica como subsídio para a análise do relevo antropogênico em área de mineração

Mining activities are directly related to changes in natural landscapes. With the objective of analyzing the changes imposed by the geomorphological dynamics of human action in areas of mining clay, two fragments were selected from the basin of Ribeirão Santa Gertrudes / SP, representing denudational and sedimentation processes respectively. This area is within the context of the Ceramic Pole Santa Gertrudes / SP, which besides its importance as a supplier of raw material, is characterized as the largest center of international reference in ceramic tiles on the American continent. Data was collected and analyzed from the perspective of anthropogenic geomorphology supported by general systems theory and uses techniques from evolutionary geomorphological mapping. Thus, geomorphological mapping were produced concerning three scenarios, which date from 1962, 1988 and 2006 in a scale of 1:10.000. These surveys allowed us to infer a detailed investigation of the evolution of changes in topography and hydrology, geomorphology representative of the original (1962), which has characteristics of an earlier phase of earlier existing large mining pits, and its evolution to a anthropogenic geomorphological stage, represented by active disruption scenarios dating from 1988 and 2006. The last two scenarios have analyzed changes in the dimensions of relief features when compared with the original scenario representative of geomorphology, as well as an intense reallocation of surface and subsurface materials, in which human action is highlighted by becoming responsible for sculpting the landscape through the imposition of control mechanisms to natural processes.

Investigação geoambiental de áreas contaminadas com elaboração do modelo conceitual em campo utilizando ferramentas de alta resolução (HRSC)

The Brazilian geo-environmental site characterizations usually do not provide a suitable Conceptual Site Model (CSM). Site assessments are mostly inappropriate and there is a lack of knowledge about the subsurface environment, generated by inconsistent data that will guide risk analyses and remediation projects full of uncertainties, causing delay on closing cases, inefficient remediation and higher global projects costs. The step of data collection must have high priority to develop a suitable CSM,, and it demands more effective high resolution site characterization (HRSC) tools than the traditional ones and, preferably, the decision-making have to be done in the field. This paper presents and discusses two geo-environmental site characterization results, in which the decision-making was done in the field based on high resolution site characterization (HRSC) used together with the traditional ones. These site investigations provided a significant time saving, allowed the detection of subsoil heterogeneities, a proper understanding of the subsurface environmental, and have generated a solid CSM in real-time. These CSM can subsidize remediation projects based on a more reliable data than those that would be obtained in traditional site investigations, concerned just in following the rules established by the environmental agencies.

Comparative analysis between biogas flow in landfill and electrical resistivity tomography in Rio Claro city, Brazil

The biogas originated from anaerobic degradation of organic matter in landfills consists basically in CH4, CO2, and H2O. The landfills represent an important depository of organic matter with high energetic potential in Brazil, although with inexpressive use in the present. The estimation of production of the productive rate of biogas represents one of the major difficulties of technical order to the planning of capture system for rational consumption of this resource. The applied geophysics consists in a set of methods and techniques with wide use in environmental and hydrogeological studies. The DC resistivity method is largely applied in environmental diagnosis of the contamination in soil and groundwater, due to the contrast of electrical properties frequent between contaminated areas and the natural environment. This paper aims to evaluate eventual relationships between biogas flows quantified in drains located in the landfill, with characteristic patterns of electrical resistivity in depth. The drain of higher flow (117 m3 /h) in depth was characterized for values between 8000 Ω⋅m and 100.000 Ω⋅m, in contrast with values below 2000 Ω⋅m, which characterize in subsurface the drain with less flow (37 m3 /h), besides intermediary flow and electrical resistivity values, attributed to the predominance of areas with accumulation or generation of biogas.

Caracterização magnetométrica do Sill de Limeira-SP

The purpose of this study is to characterize the geological subsurface structure of the diabase sill of the Paraná Magmatic Province intruded in the Itararé Group, located near the city of Limeira, in the east-central region of São Paulo state. The magnetometric method served as an important tool defining the igneous body in view of the great contrast between the physical properties of the diabase sill and the host sandstones. Previous cartographic data signaled in region a possible lateral continuity in subsurface, of the various sills that occur in the region. However, the magnetic data obtained herein indicate that the area of occurrence of this body is very restricted and independent of the others observed in the region. The analysis of the radial average power spectrum obtained allowed determine the interval of number of waves adequate for the separation of shallow and deep sources, and thus conclude that the sill of the Limeira region is located more than 100 m deep.

Efeito da adição de nanopartículas de hexametafosfato de sódio em dentifrícios fluoretados sobre a desmineralização dentária: estudo in vitro

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Emprego do método eletromagnético (em) na investigação e mapeamento de contaminações geradas por cemitérios: o caso de Monte Alto/SP

The use of geophysical methods in the analysis and mapping of likely contamination plumes has shown a huge value in the development of researches related to environmental issues. Among the main geophysical methods applied to this purpose, the geoelectrical methods stand out, being based on the use of electric and electromagnetic fields. The electromagnetic method (EM) uses physical environment responses created by electromagnetic field propagation, consisting of an alternated electric output and a magnetization force, used to obtain the electric conductivity (σ) of the subsurface materials. It has a broad application in the mineral exploration and prospection, and its use has been also efficient in environmental researches. By the electromagnetic method, this work examined and mapped possible contaminations created by cemetery leachate in the Saudade's Cemetery, located in the city of Monte Alto, Sao Paulo, where sedimentary rocks of the Bauru Group are exposed. Cemetery leachate is a putrefactive liquid, generated from the decomposition of organic matter, which contains substances that can contaminate soil and groundwater. Results achieved in this work show that the use of the electromagnetic method is an important indirect tool in the investigation of environmental contaminations in areas with highly contrasting physical properties