Efeito do envelhecimento sobre o comportamento mecânico dos músculos papilares de ratos Wistar.

PURPOSE--To evaluate the effects of age on mechanical performance of rat myocardium. METHODS--Left ventricular papillary muscles were isolated from male Wistar rats at 1, 3, 6 and 12 months of age. Muscles were studied isometrically and isotonically, stimulated at 0.2 Hz, perfused with Krebs-Henseleit solution having an external calcium concentration of 2.52 mM, and maintained at 28 degrees C. RESULTS--Peak isometric developed tension was significantly higher in 1 month than 3, 6 and 12 months. Peak rate of isometric tension rise decreased substantially between 1, 3 and 12 months. Time to peak isometric developed tension showed a significant increase of both 3 and 12 months of age. Time to half relaxation increased significantly from 3 to 6 and from 3 to 12 months. Maximum rate of tension decline decreased from 3 to 6 and from 3 to 12 months. No difference in resting tension was noted among any group. Isotonically, peak shortening and time to peak shortening increased from 1 to 3 months of age. Time to half re-lengthening increased from 3 to 6 and from 3 to 12 months of age. No difference in peak shortening velocity, peak relaxation velocity and relative change in muscle length was noted among any groups. CONCLUSION--The maturation affects the mechanical performance of cardiac muscle.

Influencia da Carga no Comportamento quanto ao Desgaste de um Aco ABNT-1020 Bifasico Revenido a 450°C

The wear rate of the dual-phase steel ABNT-1020 tempered at 450°C sliding against cemented steel ABNT-1020 in function of load value is investigated in wide load range. The alteration in behavior of this function at intermediate load level, like in the case of low hardness steel sliding against high hardness steel, is observed. The analysis by scanning electronic microscope before and after this alteration showed a change of wear mechanism from plastic displacement to embrittlement.

Análise do comportamento de rebolos convencionais na retificação de aços frágeis e dúcteis

The aim of this work war to study the behavior of the plan tangential grinding process with conventional grinding wheels, under several machining conditions and a selected dressing condition. The analysis of the grinding performance was done regarding the cutting surface wear behavior of the grinding wheel for brittle and ductile steels workpieces. The grinding input parameters, which were, cutting speed, workpiece speed and cutting feed, were chosen based on the grinding machine characteristics. The results discussion emphasized the wear mechanism of the grinding wheel cutting surface and the cutting phenomenology of the grinding process.

Comportamento fractal de tracos de fraturas na borda sul do macico granitico de itu, estado de Sao Paulo

Fractal geometry is relevant to understand and explain many natural complex geometries. Using the fractal set concept (fig. 1) many authors have shown that shorelines, landscapes and fractures follow a fractal behaviour. These authors have developed many methods, including the Cantor's Dust Method (CDM) (VELDE et al., 1992), a linear method of analysis adapted for the determination of two-dimensional phenomena. The Itu Granitic Complex (IGC) is a wide granitic body that that crops out at northwest of Cabreuva City, Sao Paulo State (fig. 2) and was affected in its south border by dextral Itu-Jundiuvira Shear Zone (IJSZ) that produced fractures and alignment of feldspars crystals. The different types of fractures (compression, distension and shear) was discriminated from the relationship between them and medium stress ellipsoid of IJSZ (fig. 3). A modified version of CDM was used to study a possible fractal behaviour of the fracture traces in the south border of IGC. The main modification was the use only one direction of analysis (NE/SW). Four parallel profiles were traced with lengths between 9.75km and 12.75km, each one them was divided into six classes of segments (x) with 375m, 500m, 750m, 1.000m, 1.250m and 1.500m. The parameter (N) is provided by he rate between profile length and choiced segment. For each x the number of intervals is counted with at least one event (fracture intersection) which supplied the parameter(n). The n/N rate provide the parameter (p) that represents the relationship between frequency of events and x. And finally the parameters p and x were plotted in a logarithmic graphics (fig. 4) that provide a line with such a declivity (1) which is related to effective dimension (De). In theory, granitics bodies are isotropics and they would have a same fractal dimension in all segments, but the logarithmic graphics (fig. 4) show that fracture traces of IGC has a fractal behaviour in a restrict interval. This fact probably occurs from the passage of a ductil-brittle deformation condition to a more brittle deformation condition of IGC.

Comportamento de cultivares de soja quanto a qualidade fisiológica de sementes

This work was carried out in order to evaluate if there was a relationship between genotypes and the physiological soybean (Glycine max L.) seed quality. It was conducted during three years using seven cultivars each year. The seeds were harvested at: 1) yellow radicle or expanded pod stage, 2) yellow pod or physiological maturity (R7), 3) harvest maturity (R8), and 4) R8 + 21 days delay. Seed moisture content, standard germination, and vigor tests were performed. The germination and vigor evaluated by accelerated aging and electrical conductivity did not show physiological seed quality differences among genotypes as harvested at physiological maturity. Then, the evaluation of seed germination and vigor, when the environment is not a considered factor, is not an efficient method to show differences among soybean genotypes in terms of seed quality.

Borohidreto complexos de cobre (I) contendo difosfinas. Caracterização espectroscópica e comportamento térmico

Tetrahydroborate complexes of copper (I) with bidentate phosphines, [Cu(η 2-BH 4)(dppm)] (1), [Cu(η 2-BH 4)(dppe)] (2), [Cu(η 2-BH 4)(cis-dppet)] (3) and [Cu(η 2-BH 4)(dppb)] (4) (dppm = bis(diphenylphosphino)methane; dppe = 1,2-bis(diphenylphosphino) ethane; cis-dppet = 1,2-cis(diphenylphosphino)ethene; dppb = 1,4-bis(diphenylphosphino)butane) were prepared and characterized by elemental analysis, infrared spectroscopy, NMR and thermogravimetric analysis. The IR data for 1-4 showed bands typical of a bidentate coordination of BH 4 group to the copper atom and the 31P{ 1H} NMR spectra indicated that the phosphorous atoms are chelating the metal centre. The thermal behavior of the compounds was investigated and suggested that their thermal stability is influenced by the phosphines. Their thermal stability decreased as follows: [Cu(η 2-BH 4)(dppe)] (2) > [Cu(η 2-BH 4)(dppm)] (1) > [Cu(η 2-BH 4)(dppb)] (4) > [Cu(η 2-BH 4)(cis-dppet)] (3). According to thermal analysis and X-ray diffraction patterns all compounds decomposed giving Cu(BO 2) 2, CuO, CuO 2 and Cu as final products.

Comportamento do cafeeiro apoatã em consórcio com culturas anuais

This study was conducted in Adamantina, region of Alta Paulista, São Paulo State, Brazil, from 1989 to 1993. Yield of Apoatã coffee (Coffea canephora Pierre ex Froehner) was evaluated during four years of intercropping with five plant species: IAC 20 - cotton (Gossypium hirsutum L.); cv. Tatu - peanut (Arachis hypogaea L.); IAC 165 - rice (Oryza sativa L.); cv. Guarani - castor bean (Ricinus communis L.) and IAC 100-B - corn (Zea mays L.). The crops were seeded 50 cm apart from coffee canopy. The treatments were arranged in randomized complete block design with five replications. Yield was significantly decreased when coffee was intercropped with castor bean, corn, cotton and peanut, but height and diameter of orthotropic branches were not affected. Linear correlation analysis showed that coffee yield was inversely correlated with the dry biomass of the intercrops.

Comportamento de cultivares de cafeeiro em diferentes densidades de plantio

This experiment was developed at Adamantina, west region of the State of São Paulo, Brazil, during May 1995 to June of 2000. The plant growth and productivity of two coffee cultivars Catuaí Amarelo IAC 47 and Obatã IAC 1669-20, were evaluated considering to plant densities of 2.500, 5.000, 7.519 and 10.000 plants ha-1. The density of 2500 also was studied with two plants in the same hole, spaced of 2,0 m in the plant line. The experimental design was the randomized completely blocks with three replications, using the split-plot system. The plots were the densities and the split-plots were the cultivars. Results showed that, with increasing of the planting density, the plant height also increased, while the stem and plant basis diameters were reduced, however the planting density did not affect the height of the first branch. The increase of the planting density also increased the field productivity and reduced the production of individual plant. The cultivation of two plants at the same hole reduced the stem diameter and the plant yield. The cultivar Catuaí Amarelo IAC 47 showed the higher plant height and the higher plant basis diameter while cv. Obatã IAC 1669-20 showed the higher stem diameter. The field productivity and individual plant productivity were not different between those cultivars in the period studied (1997-2000).

Comportamento de forrageamento do pernilongo-de-costas-brancas, Himantopus melanurus (Vieillot, 1817) (Aves: Recurvirostridae) em Santa Gertrudes, SP, Brasil

The foraging behavior of two White-backed stilts (Himantopus melanurus) was studied in a lake at the municipality of Santa Gertrudes, state of São Paulo, Brazil. The foraging strategies observed were classified in two categories: pluging (65.8% of total maneuvers) and pecking (34.3%). Only in 26.8% of the foraging maneuvers the individuals captured preys (72.9% by plunging and 27.1% by pecking). When comparing both strategies, plunging was successful 29.7% of the times, but pecking only 21.2%. At the study site, individuals foraged only up to 20 m away from the lake margin. The foraging area exploited by the White-backed stilts was estimated in about 720 m 2. Foraging activities lasted since before sunrise until after sunset. © 2006 Instituto de Ciências Biológicas - UFMG.

Comportamento fisiológico e morfológico de clones de Eucalyptus urograndis submetidos a diferentes níveis de água no solo

The present study had as its objective the assessment of the possible effects of hydric stress on the growth, physiological characteristics of two different genetic materials from Eucalyptus urograndis. The experiment was carried out in a greenhouse at Faculdade de Ciências Agronômicas of UNESP, campus Botucatu from March to July, 2005. The hydric management was established based on the soil water potential. Two water levels were established, doing the evapotranspired water replacement by pot weighing. Two clones were used, Eucalyptus urograndis 105 and 433, being the first one more resistant to the hydric deficit and the 433 more sensitive to stress. The study was made from a 2×2 factorial (two levels of water × two genetic materials). For the hydric management, the plants were irrigated when they reached a soil water potential of -0.03 MPa or -1.5 MPa. The assessments made were: diffusive water vapor of stomato, transpiration, leaf temperature and leaf water potential. The physiological evaluations throughout the day, in the end of the experiment. Treatments without hydric stress had a higher performance in all studied characteristics, but the clones had no influence. The stomatic resistance followed the potentials, showing higher values in the treatments submitted to hydric deficiency, more intensely for clone 433, being that this also happened with the leaf water potential. The transpiration also followed the leaf water potential and the stomatic resistance more intensely for clone 105 both comparing stressed plants and non-stressed plants. Consequently, the leaf temperatures had higher values for clone 433 on the stressed treatment. Thus, it can be concluded that there was a better performance in plants kept on a soil water potential of -0.03 MPa and a higher resistance to hydric stress for clone 105.

Comportamento do implante contendo bone morphogenetic protein (bmp) associado ao plasma rico em plaquetas na reparação de fraturas orbitárias

Purpose: This study intends to evaluate BMP (Bone Morphogenetic Protein) implant and BMP implant plus PRP (Platelet Rich Plasma) in rabbit orbital fractures, searching for tissue reaction, by radiological and morfometrical analysis. Methods:Third six white rabbits were submitted to orbital floor fracture and distributed in three groups: G1, with rabbits receiving a plate containing decalcified bone matrix and BMP; G2, with rabbits receiving the implant with BMP wrapped by PRP; G3, the control group where it was made the fracture only. The animals were evaluated radiologically after surgery and at sacrifice time in 7, 30, 90 and 180th day after surgery. After sacrifice, a block containing the right orbital tissue was extracted and prepared to morphological and morphometrical analysis. Results: An intensive linfomononuclear inflammatory reaction was observed at 7th day in G1 e G2, witch decreased after the 30th day; mesenchimal cells, osteoblasts, new bone and progressive cavitation of the implant were also observed, besides signs of calcium deposition by radiological study. In the control group fibrosis at the site of fracture was identified only. Conclusion: BMP seemed a good orbital implant producing new bone at the implant site and correcting bone defect.There was not observed acceleration of osteoinduction when the implant was associated with PRP.

Comportamento contrátil de barreiras selantes de solo estabilizado para base de lagoas de tratamento

Liners were proposed as subsoil contamination protection devices for waste disposal sites. In the rural environment, they can be used to construct pond bottoms for liquid waste treatment, but the construction needs to be quick and cheap. A good technical solution for these situations is the use of local soil compacted with low quantities of cement or lime, obtaining good properties for this purpose. These barriers need special care about their contraction behavior which may compromise its use. This work shows the results of contraction tests in sandy soil specimens and others stabilized with lime and with cement. Soil structure changes during cure time were checked using electronic scan microscopy. Results show maximum soil contraction of 0.648% for specimen with 14 days cure process. After twenty eight days of cure the contraction values were lower than 0.5%, which classifies the material as of low contraction. Electronic scan image shows significant material structure alteration up to seven days cure. Results show that studied mixtures had appropriate contraction behavior for liner usage.

Comportamento cinético do cloro livre em meio aquoso e formação de subprodutos da desinfecção

One indirect approach to predict the disinfection by-product (DBP) formation potential for a given water source is by evaluation of the kinetic behavior of free chlorine in the liquid phase and chlorine demand determination for different operation conditions of the chlorination process. The objective of this work was to evaluate the kinetic behavior of free chlorine in water or a number of different raw water sources, as well as to investigate the impact of the coagulation process on chlorine demand reduction and DBP formation. It was observed that the higher the total organic carbon (TOC) removal efficiency through coagulation, the lower the liquid phase chlorine demand. Regarding trihalomethane (THM) formation, a ratio of 28 ug/L formed per mg/L of applied chlorine was observed for the waters employed in the experimental investigation.